virgin & your area in autobouqetmaker

[simon123]

virgin autobouqetmaker never used one of these before I down loaded the virgin channels with the nano t3 do I use it like the D B E to put channels in order wear do I find it please

[abu baniaz]

ABM works. Try it.

[simon123]

iv found the virgin autobouqetmaker in the vix image it dosent work iv had to do a automatic scan and that working wear do I get the abm from please

[abu baniaz]

ABM = AutoBouquetsMaker

What settings are you using for the provider details?
Are you sure you have used the correct NetID?
Can you explain a bit more by "not working"

[simon123]

im ussig virgin cable uk 6952 auto scan brought 529 channels up abm says time out in a few seconds

[abu baniaz]

ABM will not work if you have told it to use the wrong NetID.

[simon123]

i no it sounds daft it will not let me put the numbers in

[abu baniaz]

Scroll left/right until you get to your one.

[simon123]

all it says time out tunner lock no Keighley or Bradford code is 6952

[abu baniaz]

Tuner lock normally means wrong netID is being used. Are you sure you have the right one?

[simon123]

yes auto tunner works fine it says westyorkshire 01 virgin uk in the menu

[abu baniaz]

I don't know what you mean by auto tuner. You can use any NetID for a normal E2 scan, it will find the channels.

For ABM and AutoBouquets cable, you must use the correct NetID (unless you are in a pure area). You must find out what your NetID is. Best way is by checking engineers menu of your offical receiver.

[simon123]

Bradford westyorkshire 40961 Keighley westyorkshire 40961 there both right

[abu baniaz]

What setting are you using in ABM? (You said it is using 00001 West Yorkshire above. You have to change it)
Did you save after selecting your region?

[simon123]

Tuner type DVB-C
Confuration mode enabled
Network ID 00000
Used service scan type Provider
Provider to scan Virgin Media UK (40961

please could explain how u would set it up ill give it another go regards simon

[abu baniaz]

In your above post, you have described tuner configuration. That is fine, leave it as it is.

You must tell ABM what Net ID to use. Look at this screenshot, move down to area, keep pressing left until you get to 40961 (don't worry about name). Once you have selected 40961, press green for OK, This saves your settings.

Once you have told ABM what NetID to use, you can then scan using ABM.

[simon123]

ill see ifs it on

[imish]

Best way is by checking engineers menu of your offical receiver.

Or checking with your neighbours if you don't have one.

[DaMacFunkin]

... but you should have one unless you intend to only watch the 4 unencrypted channels...

[melodious]

Hi abu,

i have the tm nano 3t and trying to access autobouquets for VM. it doesnt give me the option for vM provider as per your earlier screenshot. any ideas what i need to do?

i'm on openpli image

[abu baniaz]

Have you changed tuner to Cable instead of Terrestrial?

[melodious]

Yes i have. ive set tuner configuration to as per previous but set to 40160 which is for GM area

[melodious]

running a service scan and that is picking up channels, 109 so far after 31%

[Deso]

Yes i have. ive set tuner configuration to as per previous but set to 40160 which is for GM area

Manchester 1 is 41060

[melodious]

Sorry mate, you are right. ive changed it to manchester 1 as per your post.
however it did pick up 600 channels on 40160.
So still can't get autobouquets to pick up VM

[abu baniaz]

GM = Greater Manchester

[melodious]

yes, greater manchester.

[abu baniaz]

Just checked the 28/1/2015 4D (Based on OpenPLI) image. The ABM in that image although not most recent, it does have Cable as well as HD Terrestrial for the few regions people have provided data.

Which image are you on?
Menu > Information > About

[melodious]

openpli 3.0

[abu baniaz]

@Melodious, you have an old image. Flash latest 4D image or latest Openvix image.

4D images

http://www.downloadtmsw.com/bbs/main.php

Openvix images

http://openvix.co.uk/

[melodious]

is there any guides to installing the openpli image?

[abu baniaz]

is there any guides to installing the openpli image?
http://www.world-of-satellite.com/showthread.php?38693-How-to-flash-Technomate-TM-Nano-2-Super
Apart from image name, same as above

[melodious]

ok going to give it a try now. cheers mate

[cactikid]

do we have on site a list of cable netids for people to use? or can one be posted if allowed:D

[melodious]

Rights its done managed to do the autobouquets. Cheers for that.
Another question, i'm trying to setup mgcam, i assume i can download these from plugins? does the mc_cfg file have to have special settings?

[abu baniaz]

You can download the cam from plugins, but you have to provide your own config files. They have been posted on forum.

@Cactikid, all headend NetIDs are listed in ABM. We have not listed the individual towns/boroughs. Pretty sure somone posted them already.

[cactikid]

ok as have a net id list lol

[abu baniaz]

ok as have a net id list lol
Post it in here http://www.world-of-satellite.com/showthread.php?38120-Logs-for-Pure-area-required&highlight=pure+logs

[cactikid]

yes just done hope its ok lol