tagteam3283
16-12-14, 21:25
HI guys,
A quick post which may help some Solo2 users using official S&y cards.
I have been happily using 2xDuo's for over 7 years now and decided its time to update so I bought myself new new Solo2's. I had been using CCCam 2.2.1 with box key generated all working fine for both with the card chip faced down in the top slot - never had a problem. The images were regularly updated at least every week [non-HD VIX].
I had been my official S&y cards in both units then to my dismay when I transferred the cccam settings which had been working for years - it didn't work.
I tried the card upside down, in each slot, using different cams and nothing worked. Popped the cards back into my Duo's and works straight away.
##problem 1 fixed - using the correct CCCam ##
Couldn't find anything on any forums at all except for one item which mentioned that CCCam 2.2.1 will now shows entitlements on CCCam settings. I check this on my Duo and I could clearly see the entitlements for the card with 2 slots available - even with the card NOT inserted. i checked the Solo2 and there was no entitlement information at all. So i uninstalled CCCam 2.2.1v3 and installed CCCam 2.3v2, rebooted the Solo2 and then the entitlements appeared
##problem 2 fixed - using the correct card slot ##
So now I couldn't see the slows I put the cad into the to slot thinking this was sci0 - I was wrong, nothing happened. So I changed the box emu from sci0 to sci1 and whalla! entitlements for the cards appeared until sc1 on CCCam.I changed the sci1 back to sci0 then swapped the card to the lower slot and entitlements appeared in CCCam under sci0 - so in contradiction to the slot setup for solo & Duo, the Solo2 slots are reversed [that is unless something in the image is detecting this incorrectly]. In summary, sci0 is at the bottom, sci1 at the top.
Hope this helps someone. Please feel free to correct me if my finding are inaccurate.
Best regards
tagteam
A quick post which may help some Solo2 users using official S&y cards.
I have been happily using 2xDuo's for over 7 years now and decided its time to update so I bought myself new new Solo2's. I had been using CCCam 2.2.1 with box key generated all working fine for both with the card chip faced down in the top slot - never had a problem. The images were regularly updated at least every week [non-HD VIX].
I had been my official S&y cards in both units then to my dismay when I transferred the cccam settings which had been working for years - it didn't work.
I tried the card upside down, in each slot, using different cams and nothing worked. Popped the cards back into my Duo's and works straight away.
##problem 1 fixed - using the correct CCCam ##
Couldn't find anything on any forums at all except for one item which mentioned that CCCam 2.2.1 will now shows entitlements on CCCam settings. I check this on my Duo and I could clearly see the entitlements for the card with 2 slots available - even with the card NOT inserted. i checked the Solo2 and there was no entitlement information at all. So i uninstalled CCCam 2.2.1v3 and installed CCCam 2.3v2, rebooted the Solo2 and then the entitlements appeared
##problem 2 fixed - using the correct card slot ##
So now I couldn't see the slows I put the cad into the to slot thinking this was sci0 - I was wrong, nothing happened. So I changed the box emu from sci0 to sci1 and whalla! entitlements for the cards appeared until sc1 on CCCam.I changed the sci1 back to sci0 then swapped the card to the lower slot and entitlements appeared in CCCam under sci0 - so in contradiction to the slot setup for solo & Duo, the Solo2 slots are reversed [that is unless something in the image is detecting this incorrectly]. In summary, sci0 is at the bottom, sci1 at the top.
Hope this helps someone. Please feel free to correct me if my finding are inaccurate.
Best regards
tagteam