internal HDD

[keltosa]

Mutant HD 2400
internal 1TB HDD fdisk command not work

[Larry-G]

Have you tried to initialize the HDD from within the image it self ?.

[judge]

Mutant HD 2400
internal 1TB HDD fdisk command not work
Fish & chip shop, how do I know if it's Cod, Haddock or Plaice served in batter?
On a serious note, we now the box you're using thanks to your thread title, we don't know the image or build number used though?
Have you tried any image options to format the HDD rather than fdisk?
The more info you provide the better & easier it is to point you towards a working solution.

[keltosa]

hd2400 login: root
root@hd2400:~# fdisk -l
-sh: fdisk: not found
root@hd2400:~# sfdisk -l

Disk /dev/mtdblock0: 130 cylinders, 255 heads, 63 sectors/track

Disk /dev/mtdblock1: 0 cylinders, 255 heads, 63 sectors/track

Disk /dev/mtdblock2: 129 cylinders, 255 heads, 63 sectors/track
root@hd2400:~#

[softlad]

sorry to jump on somebody's post..thought it was a waste to start another,,,i would like to install an internal 2.5inch hard drive.but cant see where it goes inside.thank you

[Sicilian]

Remove lid, look in the corner near front panel, you will see a small board with 4 screws holding it in place. Remove screws, lift out, attached HDD, lower into place, slide into connecter and re-screw in place.

[mister99]

Hi

Can anybody please tell me how big of an hard drive can be fitted internally to the hd2400

[keltosa]

mut@nt imaj
openvix-Apollo.153-mutant2400
openatv-4.2-mutant2400
OpenPLi-4.0-beta-hd2400
Sorry, the are not working fdisk
http://www.world-of-satellite.co.uk/combo-digital-cable-terrestrial-satellite-receivers/Mutant-Combo-Linux-HD-Receivers/Mutant-HD2400-HD-Quad-Tuner-Digital-Receiver-2x-DVB-S-S2-2x-DVB-C-T-T2
Mut@nt HD2400 Specification:
SATAIII: 1x internal

[Larry-G]

Initialize the drive via the image it self.

[keltosa]

usb Hdd ok
internal hdd not working

[Sicilian]

Check your mounts in mount manager, Blue button > ViX > Mount manager.

[keltosa]

Sorry,
Initalisation Fotmat HDD > no storage devices found

[nsw9154]

sorry to jump on somebody's post..thought it was a waste to start another,,,i would like to install an internal 2.5inch hard drive.but cant see where it goes inside.thank you

Here are some pictures

41167 41168 41169

[keltosa]

my pictures
41170 41171 41172[/ATTACH [ATTACH=CONFIG]41173

HDD not working

[abu baniaz]

1. Can you hear any activity from the HDD during boot up?

2. What is shown in device information?
Menu > Information > Devices

3. Is HDD listed in mount Manager, (even if not mounted)?
Blue > Vix > Mount Manager

4. Can you telnet following command and post back results

df -h

[keltosa]

1. Can you hear any activity from the HDD during boot up?

2. What is shown in device information?
Menu > Information > Devices

3. Is HDD listed in mount Manager, (even if not mounted)?
Blue > Vix > Mount Manager

4. Can you telnet following command and post back results

df -h

Welcome to OpenViX for mutant2400
openvix Apollo mutant2400

mutant2400 login: root
root@mutant2400:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 891.6M 59.3M 832.3M 7% /
devtmpfs 608.1M 4.0K 608.1M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 608.2M 72.0K 608.1M 0% /var/volatile
root@mutant2400:~#

41175

[abu baniaz]

You've posted the wrong screenshot. Please obtain the devices page.

Also, you should right click and save the screenshot instead of posting the screenshot of your PC desktop.

[abu baniaz]

Thanks.
Can you hear the HDD spinning at boot up?

Do you have access to a serial cable and PC with serial port?

[keltosa]

41179 41180 41181

hdd usb communication ok
hdd internal not ok

[abu baniaz]

You are not answering the questions.

When connected internally, can you hear the HDD spin up when you switch the receiver on?

[keltosa]

@abu baniaz
i cant connect internal hdd

[judge]

i cant connect internal hdd

Why not? Have you reseated the cables? Checked the drive works elsewhere? You're really not helping anyone trying to help you here with such brief & non detailed answers.

[abu baniaz]

@abu baniaz
i cant connect internal hdd
One of your pictures shows it connected.

You started this thread a long time ago. If there is a fault with your receiver, it would be a good idea to confirm the fault and get it repaired while still under guarantee. Questions were asked to help you.

If the HDD fine when in the USB caddy and connected to receiver, there is likely a fault with your receiver? Best you contact the retailer.

[nsw9154]

With the Mutant's unique and none standard method of connecting the Hard Drive, if you do not fit the Hard Drive correctly in the mounting caddy you can get a bad connection
I found that the best way was to loosely fasten the Drive to the caddy so that it can be adjusted, and finally fastened tightly when it is properly mounted and plugged in to its mount that is soldered to the motherboard I hope that this makes sense
one other point, I can imagine someone with a heavy hand breaking the soldered mount that connects it to the motherboard :eek:

[nohat]

Sorry to come in here late in the day, but I got a mut@nt box today and have a 2.5 hard drive. It's a WD 1600BEVS Scorpio. Is it just me or does this drive not fit *smh*