PDA

View Full Version : Twin tuner


Blu-ray
29-10-14, 19:27
Just purchased new Mut@nt HD 2400 receiver waiting for delivery, so will have a VU+Uno Ultimo Duo2 plug & play DVB-S/S2 dual/twin tuner module, £59 from W.O.S selling for £39 including p&p. Will post picture when new receiver arrives.
silverfox0786
31-10-14, 02:30
you willing to take any offers on this ?
Blu-ray
31-10-14, 20:49
you willing to take any offers on this ?
I purchased this from W.O.S had it fitted but never used as i could not be bothered to change from twin lnb to quad. Will post next day delivery and recorded for security.
silverfox0786
31-10-14, 21:21
if your willing to go £30 in it I will take It
Blu-ray
31-10-14, 21:46
if your willing to go £30 in it i will take it £35 including recorded p&p.
silverfox0786
31-10-14, 21:52
yeah go on pm me please mate
Blu-ray
31-10-14, 22:00
yeah go on pm me please mate
Ok have pm you.
silverfox0786
31-10-14, 22:37
Payment sent
silverfox0786
03-11-14, 17:16
Received today, fitted all working in my UNO, least I can now remove the Sundtek now

Spot on Buddy as always

only thing I will say and not your fault is who ever fitted it for you first messed the screw thread up as the screw was not going in straight no mater how slowly I tried to turn it. In the end I had to re-tap it

think they need to re learn how to put screws in and maybe not rush things
Blu-ray
03-11-14, 18:32
Received today, fitted all working in my UNO, least I can now remove the Sundtek now

Spot on Buddy as always

only thing I will say and not your fault is who ever fitted it for you first messed the screw thread up as the screw was not going in straight no mater how slowly I tried to turn it. In the end I had to re-tap it

think they need to re learn how to put screws in and maybe not rush things
Just checked Ultimo and all tuners are held in with self tapping screws, maybe the Uno has threaded screws ?.
silverfox0786
03-11-14, 18:41
it was the thread on the actual Tuner that was knackered it was originally screwed in at an angle so the self tapping screw tapped a new thread at an angle. which I then had to rectify.Luckily I been busy building a new arcade cabinet and brought a set of tappers for that which I was able to use

Anyway All's well that ends well I guess