ABM Crash Apollo 064

[stevieg81]

Can anyone help me with this? keeps crashing during scan? I have done reflash without restore

crash log attached

Thanks in advance

[abu baniaz]

What dish/cabling setup do you have?
How many tuners on your receiver?
What is each tuner configured as?

What settings have you selected for ABM
There was something about no free tuner available, was a recording/streaming in progress at the time?

[DaMacFunkin]

Are you sure your dish hasn't been blown offline by the strong winds the other day, it seems to also suggest it keeps loosing tuner lock and receiving the wrong transponder.

[stevieg81]

What dish/cabling setup do you have? i have vusolo just connected to a sat dish
How many tuners? I have 1
What is each tuner configutred as?
Con fig mode -simple
mode: Single
Sat: 28.2E eutelsat 28A & astra 1n/2a/2f

What settings have you selected for ABM
Setup - expert
schedule scan yes
Time: 5am
repeat - daily
keep all bouquets - yes
add prefix - no
place - bottom
show in ext - no


There was something about no free tuner available, was a recording/streaming in progress at the time? No recording or streaming

Everything was working fine on vix 3.0.808

[stevieg81]

i have used dreamset to transfer over some channels and they are working fine so dish seems to be ok

[abu baniaz]

Thanks for response. What providers have you set in ABM?

Can you conduct a normal scan? If so how many chanenls do you get?

[stevieg81]

i have try northern ireland sd and currently have sky zzl northern ireland - both crash

just running normal scan now - it seems to be running ok 40% 518 channels found so far

had this problem when apollo first came out so went back to vix 3 808

[abu baniaz]

Are you using the zzl file in image or one you transferred?

[Peterj]

Can anyone help me with this? keeps crashing during scan? I have done reflash without restore

crash log attached

Thanks in advance

Problems in writing provider name into lamedb.

UnicodeDecodeError: 'utf8' codec can't decode byte 0xe9 in position 7: unexpected end of data
Create a fresh lamedb (overwrite) and try again.

[stevieg81]

Manual scan found 987 channels

The file is the one in the image.

How do I create a fresh lamedb file ? Just the one in etc/enigma2 ?

[abu baniaz]

Thanks for testing. Confirms all is OK.

Before you sort out the lamedb file, can you upload it? Using dreamset, receive from receiver and then save to PC. Zip/rar and upload here. Also curious as to where this existing lamedb came from?

Telnet command to stop receiver and remove all channels and bouquets here
http://www.world-of-satellite.com/showthread.php?p=310125

[stevieg81]

thanks for this will try this

37944

not sure where this came from to be honest?

[abu baniaz]

Let us know how you get on after you telnet that command.

[stevieg81]

excellent - all working now - thanks so much for your help :)