View Full Version : [ABM-DVB-S/S2] ABM Crash Apollo 064
Can anyone help me with this? keeps crashing during scan? I have done reflash without restore
crash log attached
Thanks in advance
abu baniaz
23-10-14, 18:57
What dish/cabling setup do you have?
How many tuners on your receiver?
What is each tuner configured as?
What settings have you selected for ABM
There was something about no free tuner available, was a recording/streaming in progress at the time?
DaMacFunkin
23-10-14, 19:11
Are you sure your dish hasn't been blown offline by the strong winds the other day, it seems to also suggest it keeps loosing tuner lock and receiving the wrong transponder.
What dish/cabling setup do you have? i have vusolo just connected to a sat dish
How many tuners? I have 1
What is each tuner configutred as?
Con fig mode -simple
mode: Single
Sat: 28.2E eutelsat 28A & astra 1n/2a/2f
What settings have you selected for ABM
Setup - expert
schedule scan yes
Time: 5am
repeat - daily
keep all bouquets - yes
add prefix - no
place - bottom
show in ext - no
There was something about no free tuner available, was a recording/streaming in progress at the time? No recording or streaming
Everything was working fine on vix 3.0.808
i have used dreamset to transfer over some channels and they are working fine so dish seems to be ok
abu baniaz
23-10-14, 19:24
Thanks for response. What providers have you set in ABM?
Can you conduct a normal scan? If so how many chanenls do you get?
i have try northern ireland sd and currently have sky zzl northern ireland - both crash
just running normal scan now - it seems to be running ok 40% 518 channels found so far
had this problem when apollo first came out so went back to vix 3 808
abu baniaz
23-10-14, 19:56
Are you using the zzl file in image or one you transferred?
Can anyone help me with this? keeps crashing during scan? I have done reflash without restore
crash log attached
Thanks in advance
Problems in writing provider name into lamedb.
UnicodeDecodeError: 'utf8' codec can't decode byte 0xe9 in position 7: unexpected end of data
Create a fresh lamedb (overwrite) and try again.
Manual scan found 987 channels
The file is the one in the image.
How do I create a fresh lamedb file ? Just the one in etc/enigma2 ?
abu baniaz
23-10-14, 20:58
Thanks for testing. Confirms all is OK.
Before you sort out the lamedb file, can you upload it? Using dreamset, receive from receiver and then save to PC. Zip/rar and upload here. Also curious as to where this existing lamedb came from?
Telnet command to stop receiver and remove all channels and bouquets here
http://www.world-of-satellite.com/showthread.php?p=310125
thanks for this will try this
37944
not sure where this came from to be honest?
abu baniaz
23-10-14, 22:00
Let us know how you get on after you telnet that command.
excellent - all working now - thanks so much for your help :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.