nat geo and nat geo +1hr

[boywonder786]

no matter whos channel list i use i cant get these two channels working everything seems to be right but it still dont work any ideas cheers?

[irishchris]

hi
press menu/setup/service searching and do a manual scan
frequency:12304.00MHz
pol.H
DVB-S
SR:27500
FEC:2/3

then exit out of menus.
press up arrow and press green for sats.
scroll down to 28.2 (services)
scroll down to nat geo
press menu when you find it and add to service bouquet
then select bouquet you wish to add it and will be placed in it at bottom

hope this helps mate

[silverfox0786]

make sure you do a hard reset of the box.

i can confirm my settings work as they are settings i use my self

[boywonder786]

silverfox;

I have just uploaded and sent your setings to my box and nat geo +1hr, and nat geo still does not work

[silverfox0786]

ahhhhh now i know what your issue is

have you downloaded a new satellites.xml latest and then done a full rescan to update the actual box itself so the bouquets can see the new frequesncies within the bouquet

place satellites.xml in usr/tuxbox do a full scan and it will show up

[boywonder786]

i dont understand that sorry... are we talkign about epg now? i only have ryvix epg selected i have disabled cross epg?
where do i get the satelites.xml file from?

[silverfox0786]

not not epg

un rar and put this file in usr/tuxbox replacing old file then rescan your the satellite on 28.2
this is assuming you have a fixed dish on 28.2e

if you have a motor setting its a bit different

[boywonder786]

Ok cool ill do that what exactly is the satelites.xml file for could u explain me please.. I dont seem to have a tuxbox folder under usr ???

by the way nice channel list i dont suppose u know which itv regional channel york, Yo10 in north yorkshire falls under is it itv grenada?

[irishchris]

if you have a motorised setting you can upload the attached file to etc/tuxbox. it is the most recent for motorised.

ps obviously unzip it first :)

[silverfox0786]

the sat.xml is a transponder listing in xml format used for scanning sats like the old days of non linux when you keyed in all the freqs manually now they are in a file then you just perform a scan the sat.xml file is kept upto date on a daily basis but without it a frequency not scanned wont show on the box regardless of if its in bouquet or not

in ITV region sub bouquet on my set pick the ITV channel that are at the bottom just befor the itv hd are yorkshire the last itv is yorkshire west and the one above it is yourkshire east
choose the one you want and replace it with 103

[boywonder786]

yeah ave found tuxbox am now doing the full channel scan by choosing manual scan...once all the channels ore found do i just ftp over silverlights channels list, i dont understand the point in doing the scan if am goign to ftp another channel list to it becasue surely it will be using the frequencies from the ftp'ed list ?

[silverfox0786]

if you have already ftped the channel list then its fine the channels will show up after scan just be sure to reboot box after it

[boywonder786]

hi mate i just done all that and no difference :(

[silverfox0786]

well them i bemused as that is the normal standard

update the satellites.xml file
rescan the the satellite using automatic scan making sure the clear before scan is ticked
and then upload the new bouquets and restart

[boywonder786]

yeah i did that i put the new xml file in tuxbox theres two sub folder in there called satellites and terestrial i just hovered over tuxbox and planted it in there... i dont know why there not working coz all other channels are...

[silverfox0786]

it not a folder its a file and it should ask you to overwrite if it did not then the xml file was not added

sorrry i think i said usr/tuxbox

its var/tuxbox

[irishchris]

Hi mate if its same issue as me with this. Extract the rar file I attached earlier. ftp it to etc/tuxbox.
If you have fixed satellitte feed for sky Try going to menu/service searching and for this tuner select simple then under that select tonebust and select 28.2 east and 28.5 east

[boywonder786]

yeah ave put it in var/tuxbox now and it did say overwrite however it still now workign i ftp ure list to the box again but still nope

[boywonder786]

i dont have the option 28.5 only 28.2 when i choose toneburst under simple it only gives me astra 28.2 i then did the same for tuner b howvere its still not showing its only nat geo 1hr that doesnt work and nat geo

[silverfox0786]

not tone burts

its

simple
single
asta eurobird 28.2
send diseqc no

[boywonder786]

above is how i have it setup mate

[silverfox0786]

i'm clueless mate. if i was close to you i would come over and look at it but as its stands i'm cluless

[boywonder786]

no worries i appreciate the help mate i thought it was a prob with nat geo and nat geo +1hr coz my other mate has the exact same problem

[irishchris]

Are you sure you are using silver's latest channel settings as the fequency for the channels you mentioned changed only 2 days ago?and reloading enigma after ftp from dbedit? Other than everything silverfox has stated ithere is not much more I could add. Am def off to bed now as am half asleep writing this :). Best of luck with it