View Full Version : Just got one
Got my 3t - great box, fast as hell. Pic on FTA 4HD is amazing. Much better than my sly+ HD box!
Now for the set up :mad:
Got my 3t - great box, fast as hell. Pic on FTA 4HD is amazing. Much better than my sly+ HD box!
Now for the set up :mad:
PQ on the new gen TM boxes is excellent on both SD & HD IMO.
Enjoy the box & good luck with the set-up.
It gets easier the more you do it...
I'm getting there! Just trying to find some decent picons as I've got old sgtflipflops ones on there and a number are missing.
Any recommended ones? Suitable for use with abm.
Using matrix hd skin. Very nice.
Shame about tsmedia not being as glorious as it once was but I can deal with that.
Need a hard drive now! Records ok to USB but sometimes a bit glitchy on playback.
Any other worthwhile plugins I should have? Was told media portal is good but isn't it all German?
Sent from my iPhone using Tapatalk
Also - my tv is lg 50ph660v full hd 1080p.
Should I have setting on box at 1080p? Or should it be less to prevent interference on the sd channels?
Sent from my iPhone using Tapatalk
i set mine to 1080p on all boxes:D
i set mine to 1080p on all boxes:D
Wicked - it is a great box. Can't wait to play with it a bit more but tonight I've got to decorate :violin::violin::violin:
:thumbsup:After a initial grapple got receiver going with ccam well impressed smooth operation does what it says on the tin picture superb
picking mine up Wednesday hope its has easey has you say
I think the TM-Nano-3T is a fantastic receiver, set mine up as one of my main boxes.
I think the TM-Nano-3T is a fantastic receiver, set mine up as one of my main boxes.
Can't comment on this box but the nano 2 super is a brilliant receiver, although my fan just died so it's not getting used until I get the time to fit a replacement this Thursday or Friday.
Sent from my iPad Air using Tapatalk HD
Been playing with my new box for a couple of hours. First reaction is very good. Fast switching and very quick at scanning.
Only issue I have at the moment is that the terrestrial scan finds nothing! Configured it for my local transmitter but no channels found. Have I missed a vital setting or is my old TV aerial adequate (though the tuner of the TV says 10/10 signal quality!)
Any clues?
Whats your Tuner settings for the Hybrid tuner?
I think the TM-Nano-3T is a fantastic receiver, set mine up as one of my main boxes.
Agreed - it's great - I just need to sort my issues with mgcamd needing the occasional restart after box being put in standby and also get rid of the hdd causing a weird reverberation (see my other post in this section if you can help!)
Sicilian - thanks for your help.
Type dvb t2
Black hill uk
5v off
What scan settings are you using?
This will give an idea..
37554
Regardless of Single transponder or Complete/Frequency or Channel, T or T2, no stations found.
I flashed the box with the latest 4D image but still no joy. Any other users having similar issues?
i just took ownership of one of these yesterday. Got my sat config up and running very quickly, no probs there. Took me a bit longer with the DVB-C tuner as i have never played with C before. i managed to find my net-id and scan 500 or so channels.
did a quick test for the PIP feature (picture in picture) using DVB-S2 and DVB-C and worked a treat. You can even customise the size and postion of the in picture feature. cool....
does any know of uk cable bouquets, cos it looks like the vix image doesnt support the C provider in the autobouquets.
cheers.
I've got the cable provider showing in ABM as an option as mine. Haven't tried downloading them yet though as had no need to.
Just to let folks know - I solved the terrestrial tuner issue. Had to tune each channel manually with bandwidth set to 8MHz and changing system to T or T2 as appropriate. Still, all good now.
Next...even at its lowest setting the fan noise is intrusive. Is there a solution?
anyone give me a heads up trying to sort my vermin / sly out to clear channels done a scan there all there
but a cant find where to put my mgcmd amd cc if I need to install a plugin how do I do this
because iv looked in the manual and it says main menu> media player > timers > information>plugins>setup> stanby/restart
but the media player and plugins option is missing
looked everwhere cant find them
Valhalla
install cams from the plugins menu first, then go to menu/setup/softcam and configure them to autostart, done. :)
does anyone know if the VIX image has a way to format a usb stick to ext4 so it can be used for EPG and PICONs?
or can fat32 be used
does anyone know if the VIX image has a way to format a usb stick to ext4 so it can be used for EPG and PICONs?
or can fat32 be used
Menu -> Setup -> System -> Storage devices -> Initialisation, will format it in EXT4.
Just to let folks know - I solved the terrestrial tuner issue. Had to tune each channel manually with bandwidth set to 8MHz and changing system to T or T2 as appropriate. Still, all good now.
Next...even at its lowest setting the fan noise is intrusive. Is there a solution?
Turn the TV up :D I can't hear my fan at all. Come to think of it I better check it even works haha
Valhalla
Reflash it with Vix. The nano 3t comes with 4d so manual refers to that and it's a little different. Put vix on it and use that - it's much better and has great support from the guys here. Then go to plugins, download mgcamd or get it from openvix.co.uk and ftp it to the box.
I have a question about softcam setup but not sure if it should be here or in the VIX support.
oops, just read the forum rules again, hence the edited question:
does anyone recomend using multple softcams (to accomadate DVB-S & DVB-C) if there is say a Nline and Cline. or should they both be pasted into something like mgcamd?
I have a question about softcam setup but not sure if it should be here or in the VIX support.
My new TM-nano-T3I uses a 28e CLine from my own Ubuntu oscam server (using CCcam protocol in oscam) and this clears nicely using the CCcam softcam the T3 . But i also want to make use of a friends cable server on the T3 and he is giving me a Nline but doesnt want me using CCCam on the T3.
So on my Nano-T3 do i use multple softcams or do i paste both lines into say oscam or mgcamd? i wont be the first or the last to ask this question since this fantastic box that does the lot.
Seriously? I suggest you re-read the site rules.
Sorry Judge, i re-read the rules straight after posting, and amended the post straight away. its obvioulsy better the to remove the unwanted cs remarks, but they are about my own official sub. Woud really appreciate you editing my ill-imformed question from your post as well bud.
I have a question about softcam setup but not sure if it should be here or in the VIX support.
oops, just read the forum rules again, hence the edited question:
does anyone recomend using multple softcams (to accomadate DVB-S & DVB-C) if there is say a Nline and Cline. or should they both be pasted into something like mgcamd?
paste both lines into cccam. done.
Sorry Judge, i re-read the rules straight after posting, and amended the post straight away. its obvioulsy better the to remove the unwanted cs remarks, but they are about my own official sub. Woud really appreciate you editing my ill-imformed question from your post as well bud.
Nope, they were about 'a friends cable server' & a quote wouldn't be a quote if I edited it.
paste both lines into cccam. done.
Rossi might be into pissing on the forum rules, but I'm not. Sorry.
If you re-read, the question was 2 fold, my official sub and a also a friends, admit i went off the rules page, so lets leave it there, post was amended.
i respect the rules.
thanx for your replies
its already flashed with vix
but the is no plugins option
its already flashed with vix
but the is no plugins option
from the remote, press the menu button and the first window that pops up should contain the plugins option.
i think its also accessable from a long colour button ut i dont remember which one
no it only says
timers
information
setup
standby/restart
I think plugins and media player are missing
Valhalla, that's why I said to re-flash
just about to reflash
change of uderpant time ;)
just about to reflash
change of uderpant time ;)
All sorted? Is it working? Plugins ok?
yes sorted m8 cheers
downloaded mgcmd and ccam just need to load lines on
thanx for your help
yes sorted m8 cheers
downloaded mgcmd and ccam just need to load lines on
thanx for your help
When you have mgcamd and CCcam installed I dont think you can have them both started and running together. Its one or the other.
Out of interest, since i installed the mgcamd plugin and did a software update to VIX Appollo 55 last week, my 3T keeps crashing to an extent i just get an unresponsive black screen, an unresponsive network adapter and needs the off/on switch flicked to start the box again.
Is anyone else seeing this. (i will probably log this as an issue in the VIX image suport section)
ok will see im struggling to get flashfxp to connect
anyone know what the default password is
got it im in
and run out of time gotta go pick kids up damm
morning gents could someone please tell me how you got your sat & cable settings on to the stb must of played last night for hours sat seems to work ok but cable isn't there any help welcome
best regards
stavo
Stavo,
i am doing this from memory (at work now) but you need to enable the cable tuner, you need a net-id and a symbol rate. Someone else can correct me if i am wrong but make sure u have a cables.xml file (not sure if the image comes with one).
from there you should be able to do a scan, or if u go to autobouqetsmaker there will be an option to switch on the cable provider bouquets. run the bouquets scan along with the 28e scan.
job done
thanks for reply chris I have now got the cable side of it up & running however when I use dreamedit to transfer my sat settings over it overwrites the cable settings & vice versa
which editor do I use to merge both sets of setting together so I can transfer to stb
best regards
stavo
why are you bothering to use it at all? are you updating bouquets?
if you are then just use the autobouqets maker, deselect the bouquets you dont need. then if you are not happy with the order of bouquets, use the "menu" button on the remote to move the order up and down to how you want it.
i havent yet used dreamboxedit since hosting dvb-s & dvb-c tuners together so i havent come across any issues yet.
When you have mgcamd and CCcam installed I dont think you can have them both started and running together. Its one or the other.
Not strictly true, quite a few users have two or more cams running at the same time for various reasons without issues. Also the ViX softcam manager was designed by Andy to be intelligent in that it staggers the cams start up so they don't all start up at the same time and cause issues, it also remembers the order by which you set your cams to start and will stick that that order.
Sent from my iPad Air using Tapatalk HD
Got it sorted it seems my dreambox edit was broken merged my settings from my solo2 with my cable settings & bingo all is well must say this stb
is a cracking receiver, one more question is their a option to auto assign cam to various encryption with in the vix image ?
best regards
stavo
Nope, they were about 'a friends cable server' & a quote wouldn't be a quote if I edited it.
Rossi might be into pissing on the forum rules, but I'm not. Sorry.
how was i "pissing" on the forum rules?
how was i "pissing" on the forum rules?
Presume you're well versed on the forum rules?
paste both lines into cccam. done.
yes but if you read my post and the post i quoted.
i dont think it was.
i only seen that question and responded to it, i dont know what else has been said or said and edited.
i only seen that question and responded to it, i dont know what else has been said or said and edited.
No worries, always possible to read edited posts at different times.
Still, no reason for 'lines' in cam configs when using local cards. Just set-it/them up correctly.
abu baniaz
15-10-14, 10:46
Do you have a valid card in your receiver?
card ? ive just come from a amiko mini hd/tc and I just dropped the files straight on and away I went didn't realise you needed a card
abu baniaz
15-10-14, 10:59
We don't do card sharing here.
Valhalla,
this forum only supports members who are using their own official sub card in the revievers card reader, not lines from elsewhere. But even then (as i found its not 100% obvious) because by definition the forum rules mean your own genuine card in the reciever, but not your own card in your home server, this is not allowed for support.
cieloszka68
20-10-14, 11:12
Does your TM plays properly DVD format?
I have a concert Paradise Lost on a network drive,
and my TM unfortunately can not play it.
My second box, Xtrend ET10000 plays the concert
no problem.
I have installed Open ATV 4.2.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.