messimagician
06-09-14, 11:36
I purchased a MB premium twin a couple of weeks a go and I can't for the life of me figure out how to get the AutoBoutiquetsMaker to scan channels, It just timesout with Tuner Lock. I have two DVB-C tuners but only have one cable going into Tuner A, no loop. In the ABM provider settings I have the correct area Manchester 2 for my provider Vermin, I know this because i've checked it against my own Tivo box.
In the Tuner configuration I have both tuners enabled and both set to DVB-C, Network ID is set on both to 41066 and Used service scan set to provider
with Vermin (6952)
If I do an automated service scan it will find over 500+ channels fine, but as soon as I try to scan using ABM it finds nothing and times out.
The box was purchased from WOS with VIX Apollo v0.24, I have tried upgrading this to the latest 0.29 and i'm still having the same problem with a fresh install.
I'm sure I read a post on here that you need to know your frequency when scanning vermin channels, I'm just going by the provider settings already on the image since this only wants to know your Area or network ID, When I do an auto scan it finds 10 + ITV1 and BBC channels of all the same channel but in different regions, I thought the whole point of the network ID was that it would only find your region only. Do you need to do a manual scan and use the frequency numbers on the TIVO box to get a more accurate channel list and is there a guide for this ?
Can someone shed some light on any of this or am I over looking something obvious ?
Thanks
In the Tuner configuration I have both tuners enabled and both set to DVB-C, Network ID is set on both to 41066 and Used service scan set to provider
with Vermin (6952)
If I do an automated service scan it will find over 500+ channels fine, but as soon as I try to scan using ABM it finds nothing and times out.
The box was purchased from WOS with VIX Apollo v0.24, I have tried upgrading this to the latest 0.29 and i'm still having the same problem with a fresh install.
I'm sure I read a post on here that you need to know your frequency when scanning vermin channels, I'm just going by the provider settings already on the image since this only wants to know your Area or network ID, When I do an auto scan it finds 10 + ITV1 and BBC channels of all the same channel but in different regions, I thought the whole point of the network ID was that it would only find your region only. Do you need to do a manual scan and use the frequency numbers on the TIVO box to get a more accurate channel list and is there a guide for this ?
Can someone shed some light on any of this or am I over looking something obvious ?
Thanks