Tuner Settings

[frank]

I have a static dish for sky UK which is connected to tuner A of my Vu+ Duo box. I wanted to know what tuner settings do I need, to setup a 1m motorized dish for tuner B.

[basilyoung]

assuming you have a diaseque motor, the tuner would need to be set to positioner, diaseque 1.2, and if the dish is set up correctly, you would change the USALs settings to you geographical location

once done

you need to asign a lnb, if tuner A is set to lnb 1, the tuner B would be set to lnb 2, for all sats that you can tune into

baz

[frank]

assuming you have a diaseque motor, the tuner would need to be set to positioner, diaseque 1.2, and if the dish is set up correctly, you would change the USALs settings to you geographical location

once done

you need to asign a lnb, if tuner A is set to lnb 1, the tuner B would be set to lnb 2, for all sats that you can tune into

baz

The motor is : DiSEqC 1.2/1.3 Usals Satellite 120 H-H Motor with GoTo X - 0


So the above settings will be ok for this motor?