View Full Version : [ViX_Misc] feeds down
hi im on Apollo 22 and seen the build has been updated to 23 but when I go to the updates on the feeds it says feeds are down , dose anyone know why this is? and what to do as would like to update apollo
thanks
Search feeds ocram picon several threads will give u the answer
Sent from my SM-N9005 using Tapatalk
sorry didn't find any answers there I take it I have to reflash again :confused::confused:
FTP into the receiver and navigate to /etc/opkg/ then delete the ocram feeds, this will fix the issue with the feeds.
Hi Worth making a sticky as it will save people a lot of time looking .
The removal of the ocram file from /etc/opkg/ worked fine for me .
Thanks
I couldn't ftp into /etc/opkg and had to flash upgrade to Apollo 023
Hi Worth making a sticky as it will save people a lot of time looking .
The removal of the ocram file from /etc/opkg/ worked fine for me .
Thanks
Several announcements have been made including via out twitter and facebook feeds, plus most users don't even bother reading the sticky threads.
whats that file called ? I dont see a file by name ocram.
whats that file called ? I dont see a file by name ocram.
The exact name is ocram-feed.conf but if you are on build 023 it wont be there as we have deleted it from the GIT specifically to fix this error.
abu baniaz
31-07-14, 18:02
You can telnet this command
rm -rf /etc/opkg/ocram-feed.conf
Thread renamed to Vix_Misc
ok thx .Thats why it is not there.
thanks pheonex just deleted the ocram-feed.conf and did the the update without any problem.
im now updated to Apollo 23 I take it was the ocram picons that coursed the problem now I am updated
to build 23 could you point me in the rite direction for a good safe working set of picons I can use
thanks for your great help :thumbsup::thumbsup:
worked nicely on my duo but for some reason it wont work on my solo2 on apollo 22:confused:i see only an opkg folder in the etc list.
Andy_Hazza
03-08-14, 09:32
Use the image manager to update
ahh very nice touch,start from scratch again a nice learning experience:D again thanks to all.
ahh very nice touch,start from scratch again a nice learning experience:D again thanks to all.
No need to start from scratch. A bit of reading release threads might help you.
tuneboy2005
03-08-14, 11:03
Hi just a question, the latest Apollo build 23 is this already with the latest drivers and new kernel?
as no new backups were found not using 753 old firmware restore i have to start from scratch as i never got to finish doing a backup as i never finished setting up 22:D.
the more times you do it the quicker it gets done:thumbsup:
Hi just a question, the latest Apollo build 23 is this already with the latest drivers and new kernel?
No, we are still beta testing the new kernel images and they have not yet been released, when or more appropriately if they do get released, we will announce it here and via our twitter and facebook feeds as normal.
the more times you do it the quicker it gets done:thumbsup:
Could not agree more, I rarely use backups with my receivers, except for testing. The rest of the time i prefer a fresh re-flash, which only takes around 10 minutes in total per receiver.
Hi I've not been on here for a long time but i am having the same problem, feeds down. went into etc/opkg but there is no ocram. can someone point me in the right direction. I have VIX image kernal 3.1.1. driver 2012.06.28 version 3.0 build 204. vu+ duo.
Hi I've not been on here for a long time but i am having the same problem, feeds down. went into etc/opkg but there is no ocram. can someone point me in the right direction. I have VIX image kernal 3.1.1. driver 2012.06.28 version 3.0 build 204. vu+ duo.
Your issue lies with the image version you are using, The feeds ViX 3.0 have been deleted as the image is now obsolete. To use the feeds again you will need to update to a newer image. Something preferably in the Apollo series.
Sent from my iPad using Tapatalk HD
Ok m8, thanks for the info. I have not updated anything on my box for a couple of years. Where can i find info about how to put a new image on.....i need to read up on it.
Ok m8, thanks for the info. I have not updated anything on my box for a couple of years. Where can i find info about how to put a new image on.....i need to read up on it.
If you go to www.openvix.co.uk and look in the guides and tutorials sections you can find a ViX manual and a full series of flashing guides. But please before you even consider updating, make a full image backup and settings backup.
Blue button > ViX > image manager
Blue button > ViX > backup manager.
Sent from my iPad using Tapatalk HD
Hello
it didn't work on my Venton HDX3, build 026.
Any other suggestion?
Thanks
That's not needed on build 026. The feeds are likely down at the moment while build 027 is being built although that's just a guess on my part as I am not near a receiver to check.
Sent from my SM-G900F using Tapatalk
don't thinks feeds are down because I can check update.
stevejd2001
29-08-14, 19:37
ive just tried feeds down for me
thought would do fresh flash and all down :confused:
They are not down but have been set to unstable due to a discovered issue in Build 027, you can still use the feeds by enabling the allow unstable updates option.
stevejd2001
29-08-14, 20:10
set to unstable and just hangs after giving unstable warning please wait
phoenix mate
on plugins btw
I came on because I had the same problem. I was trying to scan for system updates but every time I was getting the sorry feeds are down, I saw on this thread something about deleting a file in /etc/opkg/ I deleted the ocram feeds and still came up with the same problem, I was a bit too eager and deleted everything in the opkg folder, luckily that fixed it. No idea what I deleted but it works now.
Rob van der Does
29-08-14, 20:29
Yes, feeds are now down for reasons unknown.
any idea when feeds will be back up? I was in the middle of an upgrade to 025 and have no recent full image backup :-(
Rob van der Does
30-08-14, 06:30
Nope. Same situation here :(
stevejd2001
30-08-14, 08:39
i doing box for relative.
please dont make me put blackhole on.................
they will have to wait lol....just put dish up today instead
Even without the feeds you can still flash and setup the ViX Image. if you need cams they can be downloaded from www.openvix.co.uk (you must provide your own config files though), plus both CrossEPG and ABM dont need the feeds, so thats the main three things you need on a image sorted.
Rob van der Does
30-08-14, 09:37
Even without the feeds you can still flash and setup the ViX Image. ...
That depends very much on your needs. I can't, as essential plugins are not available.
bsoylemezli
30-08-14, 14:16
That depends very much on your needs. I can't, as essential plugins are not available.
Does anyone know when will it be back?
is there any way or place to download wireless drivers, and install my self while feeds are down
The feeds are working for me just tried the plugins and they are downloading :confused:
yes the feeds are back up and running, not really sure what caused the downtime as I was not involved in getting them back up but they are now so you should be good to go.
The feeds went down due to image building failure, GIT issues etc....
must have just came back on as I tried the plugins I also have the green light for update but I think I will do a Clean flash of 28 by USB without my backups from 26, as I have noticed a 10 to 15 second lag with the spinning vix sign when pressing the button when in the vix menu for the backup manager never noticed that before
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.