PDA

View Full Version : Miraclebox Premium Twin HD Auto Bouquet maker issues


Tyler
03-07-14, 21:54
Hi Guys,

There is an issue with the Auto bouquet and the epg setup on the Miracle Premium box and the same issue is on going in last couple of firmware updates on the Extrend 9000.
I have also Vu Uno boxes and they update perfectly.

So what happens is:
I Go into auto maker and set up to Rep Of Ireland Hd hit green button etc to save and do scan, Halfway through the scan it stops and says there is a time out issue.
Also the EPG does not load same issue.
I presume there must be some script or code missing and it cant finish the scan.
Can someone look into this please.
Forgot to say im using latest image on Vix.
abu baniaz
03-07-14, 22:20
If you disable one of the tuners, do you get teh same issue?

P.S you should have posted in the support section.
judge
03-07-14, 22:34
Hi Tyler, I've noticed this too on DVB-T & DVB-S boxes I use.
Haven't been able to track down or reproduce the issue every time though.
An E2 restart to a DVB-S channel usually fixes it for me though.
Tyler
04-07-14, 20:59
Hi mate,
I turned off one of the turners and it fixed the issue.
Sorry for putting it wrong tread.
Thanks again.:thumbsup:



If you disable one of the tuners, do you get teh same issue?

P.S you should have posted in the support section.
Tyler
04-07-14, 21:01
Hi mate,
Long time no here, hope all well with you.
Turning off one of the tuners sorted the issue hope it works for u bud ;-)



Hi Tyler, I've noticed this too on DVB-T & DVB-S boxes I use.
Haven't been able to track down or reproduce the issue every time though.
An E2 restart to a DVB-S channel usually fixes it for me though.
abu baniaz
04-07-14, 21:57
Can you confirm what dishes you have to each tuner?

Also, did you set the satellites manually or select "automatic"?
Tyler
06-07-14, 21:08
Hi mate,
Set this one up for brother he has only 28.2.
Setup was done manually
abu baniaz
07-07-14, 00:42
Just to clarify, you have a twin tuner receiver. You have an independent cable( i.e no switches/splitters/junctions) from dish direct to each tuner. And each tuner is set as simple, single, 28.2.
Tyler
08-07-14, 08:05
Only one tuner in use at moment.
No spliters etc at moment.
But as I stated it works fine once second tuner was disabled.
Thanks again for your advice on that ;-)