PDA

View Full Version : [VU+ Solo] Update hanging on Flashing Rootfs



dave_uk
01-07-14, 09:45
Hi all,

Turned box on today and had no audio, power cycled and had same issue.
Noticed the green update icon hadnt worked for a while so came here and seen 014 was latest. Downloaded zip file and uploaded to media/ftp and used image manager to install like I usually do.
The box is now stuck on:

"ofgwrite Flashing Tool"
"Flashing Rootfs"
"Flashing UBI image"

I have not reset or anything yet. Is this a commin issue ? Any suggestions ?
Obvious next step would be to power cycle and usb update.
Can I go from a low version up to 14 using image manager?

Thanks,
Dave

rossi2000
01-07-14, 10:37
fresh flash required for build 14

Larry-G
01-07-14, 15:41
Hi all,

Turned box on today and had no audio, power cycled and had same issue.
Noticed the green update icon hadnt worked for a while so came here and seen 014 was latest. Downloaded zip file and uploaded to media/ftp and used image manager to install like I usually do.
The box is now stuck on:

"ofgwrite Flashing Tool"
"Flashing Rootfs"
"Flashing UBI image"

I have not reset or anything yet. Is this a commin issue ? Any suggestions ?
Obvious next step would be to power cycle and usb update.
Can I go from a low version up to 14 using image manager?

Thanks,
Dave

Yes you can use the image manager to download and flash build 014, but make a settings backup with the backup manager first.

Sent from my GT-I9300 using Tapatalk