No online update possible ...

[snoopy2013]

Hello,

I`ve seen, that current there is build 012 ...

When will it possible to do an online update?

Regards

[Zartmy]

I telneted to my box and runned
opkg update
opkg upgrade

And now it shows 012

regards
Zartmy

[nsw9154]

I am still on Apollo8 and it is working fine and it was the last official version Downloadable from this site
newer versions might have slight bugs to iron out so I always wait for the proper release and do a fresh flash with backup restore
I suppose it's up to the individual but that's just the way I do it :)

[lemi]

@Zartmy
I wouldn't suggest that!! The update is to large or have bug!Here(GBUE) stopped by "deconfiguring network interface",lost connection to FTP and can't finish update.Now won't reboot and have to flash again!

[Larry-G]

@Zartmy
I wouldn't suggest that!! The update is to large or have bug!Here(GBUE) stopped by "deconfiguring network interface",lost connection to FTP and can't finish update.Now won't reboot and have to flash again!

A update from build 008 to 012 via telnet should work fine.

Sent from my GT-I9300 using Tapatalk

[Stanman]

download putty or run telnet in a CMD window and use this command to update

init 4 && opkg update && opkg upgrade && init 6

[bellejt]

I only update when the box is flashing for update.Unless there is an official release on the board in the image section.Still on 08 here and working fine.

[Stanman]

I only update when the box is flashing for update.Unless there is an official release on the board in the image section.Still on 08 here and working fine.

Build 12 is out mate, either can do a virgin flash or follow method above

[bellejt]

until yesterday is didn't see it on update.Now online is working but box stays in bootloop.Have to reflash manually to version 08.PS : Took 4 min to update and now VIX keeps turning in screen.

[snoopy2013]

Build 12 is out mate, either can do a virgin flash or follow method above

Really?

Yesterday I have tried so with build 011. But then my solo2 was hanging by "starting" - I had to reflash with a complete new image 008 ... :(

Sure, that now with build 012 it will work?

Regards

[bellejt]

not working with reflash and restore to image 08 to.Will have to try a complete new flash.

[Martincape]

Think I'll leave it at 8. Online updating is easy. Can never be bothered reflashing. Becoming more and more the norm now to reflash rather than just press the button lol.

[bellejt]

just found out that updating from image restore 07 to 12 is working fine.Strange that updating from 08 to 12 gets the box stuck in a loop .

[nsw9154]

My Green light was flashing to tell me that there was a Stable update so I updated to Apollo12 but that Bloody light is still flashing :baby::D

[kiwiz]

l i did online update from 008 to 012 and it worked

[DaMacFunkin]

After having problems in the past with online update with solo2 and duo2 i only ever do download image & restore and then restore settings (couch flash).

[lemi]

A update from build 008 to 012 via telnet should work fine.

Sent from my GT-I9300 using TapatalkIt doesn't work on GigaBlue UE:confused:I flashed again with 008 and tried update using telnet but it stopped again by "deconfiguring network interface".


Upgrading pam-plugin-faildelay from 1.1.6-r5.1 to 1.1.6-r5.2 on root.

Downloading http://enigma2.world-of-satellite.com/feeds/Apollo/mips32el/pam-plugin-faildelay_1.1.6-r5.2_mips32el.ipk.

Upgrading libasound2 from 1.0.27.2-r0.1 to 1.0.27.2-r0.2 on root.

Downloading http://enigma2.world-of-satellite.com/feeds/Apollo/mips32el/libasound2_1.0.27.2-r0.2_mips32el.ipk.

Upgrading run-postinsts from 1.0-r9.1 to 1.0-r9.2 on root.

Downloading http://enigma2.world-of-satellite.com/feeds/Apollo/all/run-postinsts_1.0-r9.2_all.ipk.

update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)

Removing any system startup links for run-postinsts ...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
Removing any system startup links for run-postinsts ...

Upgrading python-misc from 2.7.3-r0.3.1 to 2.7.3-r0.3.2 on root.

Downloading http://enigma2.world-of-satellite.com/feeds/Apollo/mips32el/python-misc_2.7.3-r0.3.2_mips32el.ipk.

Upgrading python-compression from 2.7.3-r0.3.1 to 2.7.3-r0.3.2 on root.

Downloading http://enigma2.world-of-satellite.com/feeds/Apollo/mips32el/python-compression_2.7.3-r0.3.2_mips32el.ipk.

Upgrading python-twisted-protocols from 12.0.0-r6.1 to 12.0.0-r6.2 on root.

Downloading http://enigma2.world-of-satellite.com/feeds/Apollo/mips32el/python-twisted-protocols_12.0.0-r6.2_mips32el.ipk.

Upgrading init-ifupdown from 1.0-r7.1 to 1.0-r7.2 on root.

Downloading http://enigma2.world-of-satellite.com/feeds/Apollo/mips32el/init-ifupdown_1.0-r7.2_mips32el.ipk.

Deconfiguring network interfaces...

[ukbob]

[QUOTE=lemi;299549]It doesn't work on GigaBlue UE:confused:I flashed again with 008 and tried update using telnet but it stopped again by "deconfiguring network interface".

[CODE]

I got that 5 mins ago on vu duo..

[lemi]

[QUOTE=lemi;299549]It doesn't work on GigaBlue UE:confused:I flashed again with 008 and tried update using telnet but it stopped again by "deconfiguring network interface".

[CODE]

I got that 5 mins ago on vu duo..
You got what?Same error?Thanks.

[jth]

My Green light was flashing to tell me that there was a Stable update so I updated to Apollo12 but that Bloody light is still flashing :baby::D

hi m8 what light flashes to tell you theres an update?
im on 008 and went to software update and nothing is there.

[hairybadger]

just found out that updating from image restore 07 to 12 is working fine.Strange that updating from 08 to 12 gets the box stuck in a loop .
I've just had this upgrading (opkg upgrade) from 011 to 012 - box hung, then on restart got stuck at "Starting.....", even after hard power cycle. A reflash (once I'd remembered that the key has to be formatted FAT32) + settings restore got the solo2 working again. Upgrade logs:

(log attached as file because it exceeds permissible message size)

[rte]

I tried to update my Ultimo through telnet from Apollo 008 to 012. It went fine until it was stuck to "Deconfiguring the network interfaces".
I had a WLAN-connection and obviously the update couldn't recreate it. The receiver couldn't be started any more. So, reflashing had to be done. No problem, however, since all the settings could be restored. WLAN-connection is always a problem, also using reflashing. My conclusion is that LAN-connection works and should be used when reflashing, now also telneting the update.

[Wizard55]

Same issue here on Gigablue Quad. Stuck on deconfiguring the network adapters. Box wont start, had to reflash yet again. Hopefully this will be the end of the reflashing.