PDA

View Full Version : [VU+ Solo2] Please help, flashed new image and no channels, nothing



Dyno
20-06-14, 12:58
Ok so flashed Apollo 008 image from openvix 3.0, had to start from scratch and fine tune all my settings again took ages but eventually got it dialed in

Then last night after watching a recording I tried to exit to EPG and basically there is none

All I'm getting is the boot image of the cave pool.

If I press EPG it takes me to an empty EPG screen with the boot image in the corner

I can't find any channels

Tried to rescan channels which are all being read fine 900 odd. The download cross EPG and auto bouquets

Still nothing showing on the EPG and channel lists

Can anybody shed any light on what's gone wrong?

It was working ok for the first few hours like

Thanks guys.

Milamber44
20-06-14, 13:55
Same experience here. Regards.

nsw9154
20-06-14, 13:59
Hello have you set up ABM & CrossEPG properly - Menu/setup/service searching/AutoBouquetMaker set up your providers then start scan

Dyno
20-06-14, 14:13
Yes buddy done all that, she was up and running for a few hours then boom

Checked all the settings over and over and everything looks spot on.

dave798
20-06-14, 14:24
press up or down on remote then blue button then choose from bouqet

abu baniaz
20-06-14, 14:28
When you press EPG, what is the address bar at the top? I.e what bouquet are you in?

EPG and bouquet/channel lists are different things. Can we tackle channel lists first then go to EPG afterwards?

Dyno
20-06-14, 14:50
It took me straight into the EPG , but it was empty.

Tried a reflash there and used the settings backup I made and it was exactly the same.

So now I've reflashed again, fresh settings and going to scan channels to see if I can get a picture at all

Dyno
20-06-14, 16:01
Ok, this is starting to worry me abit here.

Done a full reflash with Apollo 8 and nothing, can't get the box to see any channel/bouquet at all

Both tuners set to 28.2e

Provider set to sky uk open tv astra2 28.2

Been over and over the settings

This is very strange, anybody?

Andy_Hazza
20-06-14, 17:33
Press your TV button?

abu baniaz
20-06-14, 20:21
In post 8, you have mentioned EPG settings. how are you creating your bouquets?

Dyno
21-06-14, 10:25
I was using autobouqets e2 from the feeds.

Was out last nite and came home to find I've got my channels back!

Happy days not sure what happened but I think it's ok again!

Need to dl the autobouqets again from the feeds but all looks ok

Cheers for the replys