Help with oscam config files location

[ste141]

I have just installed oscam_cccam2.1.3 but can't find the location of the config files, Do I need to create them if so where do they go?

Box: dm800se v2
Image: Openatv 4.0


Thanks in advance,
Ste

[abu baniaz]

On OpneATV images, configs are in /usr/keys/

[ste141]

Ok thank you should the files already be there or do I need to add them? Also do they need to be in a folder called 'config'?

Thanks

[abu baniaz]

Depends on what you downloaded. The ones that MasterG does normally have the configs in them. AFAIK there is no need config folder in /usr/keys/ for that image.

[ste141]

Right ok I've added the 3 config files into usr/keys but still cant access the webinterface!

this is my oscam.conf file:

[global]
logfile = /var/local/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 0
saveinithistory = 1

[newcamd]
port = 15500@0963:000000
key = 0102030405060708091011121314
keepalive = 1


[webif]
httpport = 15000
httpuser = user
httppwd = password
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled =1
boxtype = dreambox
user = localuser
au = 1

[abu baniaz]

Have you started oscam?
Are you using port 15000 as per your configs?

[ste141]

Yes oscam_cccam2.1.3 started and config files in usr/keys.

[ste141]

Can you help me please

[judge]

Is the box you're trying to connect the oscam webif from in the 192.168.0.0-192.168.255.255 network range?
What happens when you try to connect?

[ste141]

Yes its 192.168.1.36 and when i enter it 192.168.1.36:15000 into google it just says it can't connect! oscam is started.

[ste141]

chrome address bar i mean

[redrobin]

Did you restart oscam after added the config files

[ste141]

yes I did i dont think usr/key is the right place for the config files?

[abu baniaz]

Extract ipk with 7zip, youll have to extract twice. You'll see where they are.

[ste141]

thank you files are in right place now but webinterface says i'm missing oscam.services, whitelist, srvid etc where can I get these

At the moment my card is clearing channels but the webinterface is saying cannot open dev/sci0 also UNKNOWn entitlements .

Thanks

[ste141]

also i'm using oscam to update not cccam.

[abu baniaz]

Maybe would be better to download oscam only ipk?

DM800SE has two readers, 00 is bottom, 01 is top AFAIK.

[ste141]

Ok where could I get that? also do i need any others files other than oscam user, conf, server, dvbapi?

[ste141]

Do I need the files that are not found? At the moment i have oscam.user, conf, server, dvbapi, whitelist, srvid and services files.

information from webinterface:

2014/05/22 12:37:08 0 s starting thread log_list_thread
2014/05/22 12:37:08 0 s log_list_thread thread started
2014/05/22 12:37:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7505 (mipsel-streamboard-linux-gnu)
2014/05/22 12:37:08 0 s version=1.20-unstable_svn, build #7505, system=mipsel-streamboard-linux-gnu, nice=-1
2014/05/22 12:37:08 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2014/05/22 12:37:08 0 s max. logsize=unlimited, loghistorysize=4096 bytes
2014/05/22 12:37:08 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2014/05/22 12:37:08 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/05/22 12:37:08 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/05/22 12:37:08 0 s signal handling initialized (type=sysv)
2014/05/22 12:37:08 0 s 915 service-id's loaded in 13ms
2014/05/22 12:37:08 0 s ERROR: Cannot open file "/usr/keys/oscam.tiers" (errno=2 No such file or directory)
2014/05/22 12:37:08 0 s ERROR: Cannot open file "/usr/keys/oscam.provid" (errno=2 No such file or directory)
2014/05/22 12:37:08 0 s ERROR: Cannot open file "/usr/keys/oscam.guess" (errno=2 No such file or directory)
2014/05/22 12:37:08 0 s ERROR: Cannot open file "/usr/keys/oscam.ird" (errno=2 No such file or directory)
2014/05/22 12:37:08 0 s 54 entries read from oscam.whitelist
2014/05/22 12:37:08 0 s ERROR: Cannot open file "/usr/keys/oscam.cacheex" (errno=2 No such file or directory)
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s monitor: disabled
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s camd33: disabled
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s camd35: disabled
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s cs378x: disabled
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s newcamd: initialized (fd=5, port=15500, crypted)
2014/05/22 12:37:08 0 s -> CAID: 0963 PROVID: 000000
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s pandora: disabled
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s csp: disabled
2014/05/22 12:37:08 0 s Starting listener 0
2014/05/22 12:37:08 0 s radegast: disabled
2014/05/22 12:37:08 0 s starting thread http
2014/05/22 12:37:08 0 s http thread started
2014/05/22 12:37:08 0 s starting thread reader check
2014/05/22 12:37:08 0 s reader check thread started
2014/05/22 12:37:08 0 s starting thread check
2014/05/22 12:37:08 0 s check thread started
2014/05/22 12:37:08 0 s skyuk [internal] creating thread for device dev/sci0
2014/05/22 12:37:08 76E00468 h HTTP Server listening on port 15000
2014/05/22 12:37:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/05/22 12:37:08 0 s waiting for local card init
2014/05/22 12:37:08 AAAEB8 r skyuk [internal] ERROR: Opening device dev/sci0 (errno:2 No such file or directory)
2014/05/22 12:37:08 AAAEB8 r skyuk [internal] Cannot open device: dev/sci0

[leppto]

This might be nothing, but ip ranges are not usually defined up to .255 ( which is the broadcast ), use from 1 to 254 instead. Some applications have crashed to this kind of problems....

C-class should be also sufficient, in your case 192.168.1.1-192.168.1.254

[ste141]

Its not the ip address I can access the webinterface fine.

[ste141]

I just need to know what files i need to show my entitlements and update my card using dvbapi. Thanks

[timofee]

You don't need any more files than the three basic ones - oscam.conf, oscam.server & oscam.user

[ste141]

right ok why is it not working then because i have them 3 files but if you look at my information from the webint its says that it cant connect and i'm missing files.

[redrobin]

Is the card in the right way up.

Think the missing files is a warning rather than an error, those files maybe optional

[lemi]

right ok why is it not working then because i have them 3 files but if you look at my information from the webint its says that it cant connect and i'm missing files.
Are you sure that your card is in right slot? Oscam server is correct and reader started?
PS
Why not Doscam v0.19 It works perfect with ATV image:violin:

[ste141]

Where would i download doscam? i cant seem to find it.

[ste141]

Also how can I remove oscam? It isnt in my plugins list! i've got a file called RemoveOscam7505+CCcam213.nab in a folder called uninstall.

Thanks

[lemi]

I don't know how you loaded oscam to receiver.If from feed,then go to plugins-remove plugins-softcam-oscam. Or you have to ftp to receiver and remove it.Have you installed softcam-feed ipk for ATV? If yes,press blue-softcam-download softcams and you'll find there doscam:)
This is a Doscam feature:Zeroconfig will auto-configure the smart card and connect the box to any other box in your local network running doscam whithout any manual configuration.:thumbsup:
PS
Don't forget,after deleting files,reboot and after installing files,reboot!!

[ste141]

thanks a lot oscam removed now and doscam installed.

[lemi]

thanks a lot oscam removed now and doscam installed.Very good:thumbsup:
Now,you have to tell us...Problem solved or not.?:)