Stuck on welcome screen

[xfish]

My box rebooted out of the blue and is now stuck on welcome screen.
I tried to turn it off for few minutes, restart without network cable - but still no luck.
It restarts normally (I can see percentage on box display), than it changes resolution to 1080p as set up in settings, than VIX appears few times in the corner and it stops there.
Remote control doesn't work, openvix welcome screen stays on.

Any ideas how to fix it.
(I don't remember which image it's on)

EDIT:
I can access box through the network.

[Rob van der Does]

In telnet do

init 4
enigma2
and post the output here.

[xfish]

Distro: openvix
Version: 3.0
Build: 808
Brand: Vu+
Boxtype: vusolo2
Machine: Solo┬▓
Drivers: 20131212
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
12150k video mem
- double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7e9070 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is a keyboard
Found 1 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 1200
eHdmiCEC: send message 84 12 00 03
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 1083 channels/transponders and 15297 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 9 demux, boxtype 4
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
found 19 spinner!

executing main
setIoPrio best-effort level 3 ok
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[Harddisk] enumerating network mounts...
Reading satellites.xml
removing internal link on frontend id 0
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal),
need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal),
need rotorworkaround No, enabled Yes, DVB-S2 Yes
tuner 1 depends on satpos of 0
slot: 0 configmode: advanced
add 16 to 33
add 30 to 33
add 31 to 33
add 33 to 33
add 49 to 33
add 50 to 33
add 70 to 33
add 90 to 33
add 100 to 33
add 130 to 33
add 160 to 33
add 170 to 33
add 192 to 33
add 200 to 33
add 215 to 33
add 233 to 33
add 235 to 33
add 255 to 33
add 260 to 33
add 282 to 33
add 305 to 33
add 315 to 33
add 317 to 33
add 320 to 33
add 330 to 33
add 360 to 33
add 380 to 33
add 390 to 33
add 420 to 33
add 432 to 33
add 450 to 33
add 460 to 33
add 475 to 33
add 490 to 33
add 500 to 33
add 502 to 33
add 505 to 33
add 510 to 33
add 525 to 33
add 530 to 33
add 549 to 33
add 550 to 33
add 558 to 33
add 559 to 33
add 570 to 33
add 600 to 33
add 620 to 33
add 630 to 33
add 642 to 33
add 660 to 33
add 685 to 33
add 705 to 33
add 721 to 33
add 90 to 1
add 130 to 1
add 160 to 1
add 192 to 1
add 235 to 1
add 282 to 1
add 390 to 1
slot: 1 configmode: satposdepends
sec config completed
[Picon] adding path: /media/hdd/picon/
[Time By]: Transponder
main thread is non-idle! display spinner!
[Ipkg] Added to OPKG destinations: /media/hdd
[Ipkg] Added to OPKG destinations: /
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[SKIN] loading include: /usr/share/enigma2/ViX-Common/CommonSkin.xml
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropr
iate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropr
iate ioctl for device >
Activating keymap: Default (US)
Activating language English (UK)
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: letterbox
cannot open /proc/stb/avs/0/input_choices
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080p, rate: 50Hz
[EPGC Loads] Poller enabled.
[EPGC Save] Poller enabled.
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/jmgp.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] /media/hdd/jmgp.dat not found, try /epg.dat
couldn't open /proc/stb/misc/12V_output
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 640, in <module>
Components.UsageConfig.InitUsageConfig()
File "/usr/lib/enigma2/python/Components/UsageConfig.py", line 373, in InitUsa
geConfig
File "/usr/lib/enigma2/python/Components/config.py", line 1574, in __setattr__
File "/usr/lib/enigma2/python/Components/config.py", line 80, in load
File "/usr/lib/enigma2/python/Components/config.py", line 790, in fromstring
ValueError: invalid literal for int() with base 10: '<!DOCTYPE HTML PUBLIC "-//I
ETF//DTD HTML 2.0//EN">'
---- saving lame channel db
saved 1083 channels and 15297 services!
release cached channel (timer timeout)
thread joined 0
set RTC to previous valid time
- (41) eServiceFactoryDVD
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
clear instance
- (36) Stream server
- (35) CI Slots
- (35) CA handler
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) input device driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (5) Tuxtxt
- (1) Background File Eraser
reached rl -1

[lemi]

Have you tried to unplug USB or HDD and reboot?How is your box connected to TV? Was your TV on or off?

[xfish]

No USB, I haven't unplugged HDD, box is connected to AV receiver with HDMI cable, TV and AV were on.

[lemi]

I would try to turn box off-unplug HDD and turn on.

[xfish]

I would try to turn box off-unplug HDD and turn on.
Tried that - no luck.

[lemi]

And,does it boot without HDMI attached to AV or TV? If not,I will suggest Helios.

[xfish]

Thanks. I've flashed it with Helios at the end.
Had a problem with cccam not starting but after few reboots it's working.