View Full Version : Help with recording!
Hello there,
I am having difficulty recording two channels at once. when recording is on other channels are dimmed and I can't watch it. I have a motorised dish too.
can someone guide me through it please.
Thanks.
How many feeds have you got connected to the box ?
Whats your tuner configuration ?
I'm assuming one feed which means you can only watch channels on the same transponder as you are recording , that's why they are greyed out
This is my Tuner configuration 34513
Can you please guide me through the steps to fix the issue please.
Rob van der Does
07-05-14, 11:45
This is my Tuner configuration 34513
Can you please guide me through the steps to fix the issue please.
According to the settings you have two motors ('equal' is English for 'the same as'). Do you indeed have 2?
Rob van der Does
07-05-14, 17:27
OK, then the setting is fine indeed.
I needed to make sure, as many people who have one motor still use the setting you use.
So how can i make other channel work when recording two channels?
Rob van der Does
07-05-14, 22:09
It should simply work. I can't think of any reason why it doesn't.
Which image do you use?
DaMacFunkin
08-05-14, 18:37
So you have TWO motorised sats? or one motorised sat with 2 connections?
I am using Black Hole.
:eek: this is a VIX forum for Vix problems :rolleyes:
Hi,
the behavior is normal. When you have "only" 2 tuner and 2 recordings take place you can only watch channel which are on the 2 transponder you are recording and nothing else. This is not BH specific.
ciao
DaMacFunkin
08-05-14, 18:50
Is it? i thought it was world of satellite forum, and world of satellite do supply solo2 with black hole on if you so wish...
Hi,
btw. to your question: If you want 2 recordings and watch a random other channel you need a 3rd tuner and a 3rd motor:-)
concerning BH. You get support if we can but hardly anybody here uses BH.
ciao
Rob van der Does
08-05-14, 19:14
:eek: this is a VIX forum for Vix problems :rolleyes:
Is it? i thought it was world of satellite forum, and world of satellite do supply solo2 with black hole on if you so wish...
You're welcome here with questions about all images.
But as most users here will use ViX, chances are that answers will take some time.
So you have TWO motorised sats? or one motorised sat with 2 connections?
I have one motorised sat with two connections.
Rob van der Does
08-05-14, 20:38
Pfffttt, I've asked that before http://www.world-of-satellite.com/showthread.php?37845-Help-with-recording!&p=288529&viewfull=1#post288529 ....... I'm sorry we have 2 pages of misinformation :confused:
So your setup is indeed wrong; tuner 2 should be set to 'loopthrough' or 'Second cable of motorized LNB'
abu baniaz
08-05-14, 21:04
I have one motorised sat with two connections.
Just to clarify, you have one motorised dish. The LNB has two ouputs as in picture?
If so the tuner with cable to motor should be set as USALS.
The tuner with cable to LNB should be set as "Second cable of motorised dish"
The golden rule is that the receiver must be configured to what the real life setup is.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.