vu+ solo2 openvix-3.0.808

[vu-solo2]

Hi can't find from where download this image openvix-3.0.808

[josh_g]

that's now an old image now and not hosted on our downloads section and also has no access to the feeds

is there a reason you want to flash to 808?

[vu-solo2]

wel now is Helios.010-vusolo2 very slow
I have tried Zeus.023 was very good but for some reason after couple weeks start spining VIX logo top left corner and wont let me do anything so i reflashed with Helios.010 this is very slow zapping

[josh_g]

thats odd.. do you have picons or EPG data stored on a internal HDD

if you really want 808 try googgling it but i would recommend staying where you are and trying to sort out the slowness issue

[vu-solo2]

yes i did have on Zeus.023 EPG data stored on a internal HDD

[Rob van der Does]

Also there are no feeds for 3-808.

Something must be wrong in your set up. You'd do better in trying to fix that. My Solo2 is absolutely fine.

[Larry-G]

wel now is Helios.010-vusolo2 very slow
I have tried Zeus.023 was very good but for some reason after couple weeks start spining VIX logo top left corner and wont let me do anything so i reflashed with Helios.010 this is very slow zapping

Thats odd as most people report the opposite, aka that Helios is snappier than Zeus and 3.0. Its certainly true of my own solo2.

Sent from my GT-I9300 using Tapatalk

[josh_g]

i wouldn't store EPG data on a HDD as when the box is sat there for a while and you change channel it takes a while for the box to read the disk and update (my tm-twin did this when my usb broke)

i would flash helios 10 again with only softcam and channel list and see how it zaps then

[vu-solo2]

OK josh_g this is what im going to do now let you know how i'm getting on

[Rob van der Does]

i wouldn't store EPG data on a HDD as when the box is sat there for a while and you change channel it takes a while for the box to read the disk and update
That is not correct: the data is only read once when Enigma starts. HDD is fine for EPG.

[Larry-G]

As Rob says EPG data is held in live memory and only written to or read from the HDD etc at boot up and shutdown.

Sent from my cyclone voyager using Tapatalk

[vu-solo2]

stupid question how do you switch off your box as im always swith off on stand by ?

[BubbleBalls]

Long press power button and select deep standby.

Tapatalker

[josh_g]

That is not correct: the data is only read once when Enigma starts. HDD is fine for EPG.

when i had mine on HDD and left it sitting for a while and changed channel i could hear the HDD spin up when zapping? :confused:

[vu-solo2]

looks good which mgcamd would you recommend on Helios.010-vusolo2 ?

[vu-solo2]

Meniu -> Plugins -> download plugins 2 options picons and setting ? where is the rest of the list ?

[bellejt]

here all on USB stick (all sorts off picons and EPG).Works pretty fast.

[vu-solo2]

where is softcams option skin and rest of them

Connection attempt failed with "ECONNREFUSED - Connection refused by server". ftp bye bye to openvix :fart2: