Help flash my TM Nano 2T

[ianbev]

Hi, thanks for the images , trying to reinstall them but cannot get the box to see USB on start up .
Is there a certain way ?
Sorry if its posted in the wrong place ,cannot seem to find any info.

Thanks. Ianbev

[judge]

trying to reinstall them but cannot get the box to see USB on start up .

That's usually down to a couple of things...
Format of USB stick not correct.
File/folder structure of image on the USB stick not correct..
Bootloader update required.

If you're trying to install a Zeus build, have you managed to flash the bootloader for the TM-Nano-2T first?
http://www.openvix.co.uk/index.php?dir=Bootloaders/Technomate-Bootloaders/TM-Nano-2T/

[ianbev]

Thanks for the reply,
Format is fat 32
Have down loaded the boot loader onto the stick but cannot get it to read
I have tried 2 different files ,neither one will install.
After I down load it i unpack it and put it onto the USB. If I try to view it it opens up 3 or 4 other files with different parts on .
Hope I have explained it all ok

Hope you can help ?
Regards. Ianbev

[judge]

Try formatting the USB stick with this tool (http://www.world-of-satellite.com/showthread.php?45-USB-Format-Tool&p=78&viewfull=1#post78) first.

[ianbev]

Cheers , now the box reads the USB , only takes a couple of seconds to do it . But still carnt get past the 50 Htz symbol when it reboots . Keeps crashing at this point ,any ideas .
Should the boot loader be combined with the flash ?
Should I install them together ?
Sorry for all the questions .
Ianbev

[judge]

Should the boot loader be combined with the flash ?
Should I install them together ?
Sorry, don't have a TM to test with at the moment, but no. The bootloader flash really should be done on its own, then image flash.

[abu baniaz]

What image are you installing? What is date of bootloader?

You may have flashed the bootloader for Zeus.

P.S. this is a release thread, you should have started a new thread. I'll move posts tomorrow.

[ianbev]

Sorry for that ,
Not sure on the date of the files .?
I will try the bootloader first ,
Do I have to move this to somewhere else on the forum , not sure as I am new to this ,read a lot but not posted ,
Cheers ianbev

[abu baniaz]

@ianbev, your thread has been moved here.

2014_02_14 bootloader is here
http://openvix.co.uk/index.php?dir=Bootloaders/Technomate-Bootloaders/TM-Nano-2T/ (http://openvix.co.uk/index.php?dir=Bootloaders/Technomate-Bootloaders/TM-Nano-2T/)
No need to flash it again if it is the same one that you have installed already. When you complete the bootloader install/flash, delete the update folder from your usb drive.

Most recent images are here
http://openvix.co.uk/index.php?dir=TM-Nano-2T/ (http://openvix.co.uk/index.php?dir=TM-Nano-2T/)

Flashing guides are here
http://openvix.co.uk/index.php?dir=Guides%20and%20Tutorials/Flashing%20Guides/ (http://openvix.co.uk/index.php?dir=Guides%20and%20Tutorials/Flashing%20Guides/)

Don't worry about having posted in the other place. Admin would like support threads to be like in this link. http://www.world-of-satellite.com/showthread.php?33155-ALL-MEMBERS-PLEASE-READ!-New-method-of-posting-in-ViX-Support-Section (http://www.world-of-satellite.com/showthread.php?33155-ALL-MEMBERS-PLEASE-READ!-New-method-of-posting-in-ViX-Support-Section)! Better for everyone as we don't have to guess etc. More detail someone provides, better the support will be.