View Full Version : Updated to vix 3 808 internal had not showing help
Updated to vix 3 808 but can't see the internal hdd in the menu---info--device information, it only shows the USB drive,
Before this update the 2tb hdd was showing in the drives,
How do I add it up again
Thanks
Rob van der Does
29-03-14, 07:58
Updated to vix 3 808
May I ask why you 'updated' to an old, no longer supported version?
It was couple of months back when I updated, it was current at that time, I updated from vix 2.1 the 2tb internal hdd was showing there and has some recordings on it,
Just don't know which Plug in I need, cause don't want to initialise the hdd as it will loose all the recordings.
Have got a USB hdd 2gb which takes the cross egg, picon.
Sent from my LG-V500 using Tapatalk
Rob van der Does
29-03-14, 11:49
You never need to initialise the HDD when updating/flashing (if it was working properly in any other image).
But it's not working I think I need to install nfs or some other plug in for the hdd to be seen
Sent from my LG-V500 using Tapatalk
Rob van der Does
29-03-14, 12:09
I surely hope you internal HDD is not in the NTFS-format. That will never be satisfactory, so initialisation will be your best option if it is.
For the time being you could install the NTFS-drivers from the feeds, so you can watch your recordings (and move them to another location, so you can do the initialise trick).
The only device showing in device information is the USB as
/media/hdd size 2.07 gb free 480mb
Recording path is also
Media/hdd
It needs to be changed to hdd
But how do I do it,
It's a plug in which was taken out from the image which was in vix 2.1
Sent from my LG-V500 using Tapatalk
It's 3.0.808
Sent from my LG-V500 using Tapatalk
tomthebomb1968
29-03-14, 14:14
When watching tv press Blue button
VIX
Mount Manager(press ok to show all the drives currently mounted)
Press green to setup your mounts
Use the left/right buttons to toggle your usb stick to /media/usb and your hard drive to /media/hdd
Press green to save and the box should reboot with the mounts created
But why not install the newest image first then do the above
In the menu /system/ can't see hard drive option.
How do I set up the hdd
Sent from my LG-V500 using Tapatalk
In storage devices /hard disk setup/
Initialisation only show CBM(flash disk) - rxternal(2.116gb)
Cant see my other hdd just see the USB
Can someone help pls
Sent from my LG-V500 using Tapatalk
tomthebomb1968
29-03-14, 14:30
If the hard drive is being detected it will show up when you do what i said
Press blue
choose VIX
choose Mount manager
You dont set it up from main menu you just initialize it or test it and you dont want to inittialize as you will loose recordings
Rob van der Does
29-03-14, 15:48
Menu --> system --> storage devices
No hdd shows up
Change the USB to hdd/USB
Now what next
Sent from my LG-V500 using Tapatalk
Andy_Hazza
29-03-14, 16:16
Are you sure you have connected it up correctly?
It was connected earlier, just updated the image will open the box and have a look at the connections
Sent from my LG-V500 using Tapatalk
It was the power cable of the hdd which was loose I think, took it out and put it back in, and the hdd is showing now
Sent from my LG-V500 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.