View Full Version : FlashFXP guide
Hi am having a bit of difficulty connecting my VU+ box to FlashFXP
can someone help me identify my host name ext
thanks
Filezilla is much better, give that a try :)
Thank you
i found the ip of VU box and the hostname vuduo am getting there
Using FlashFXP 4.4.xxx
Open FlashFXP and hit F4 to open the site manager.
press the NEW SITE button, enter the name of your receiver into the box that pops up then press ok
Connection type = FTP
address = the IP address of your receiver
port = 21
Login type = Normal
user name = root
password = left blank by default unless you have setup a new password.
Then just press the apply button, this will save your profile so you wont have to enter the details every time. and hit connect.
It's literally as easy as that.
Filezilla is much better, give that a try :)
I have been using a paid for version of FlashFXP for well over 10 years without any issues at all.
great its installed how do i edit it?
the file to put my details in lol thought thats what i was doing
Highlight the file and right press ( right mouse button ), then select EDIT.
or Highlight the file and press CTRL -E
its ok my fault i forgot to upload my config file do i also upload the .list file too?
tried to edit it just opened with notepad its all garbled :(
i give up
think am getting somewere am getting an error no config found /var/keys i put in there 2 files one .list and the other .cfg
still am having problems
press the blue button go to softcam manager
is mgcam runnung ?
yes restart it
no start it
dont see mgcamd - install it
hope it helps
if you need help PM me as its a bit of a taboo subject
press the blue button go to softcam manager
is mgcam runnung ?
yes restart it
no start it
dont see mgcamd - install it
hope it helps
if you need help PM me as its a bit of a taboo subject
May i remind you that the same rules apply to the PM system as they do the open forum, and while we cant police the content of the PM system, we will take action against members where we are made aware of them breaching the site rules via the PM system.
Not accusing any one just a friendly reminder.
i think ive install the wrong ipks how can i delete them and start again please?
May i remind you that the same rules apply to the PM system as they do the open forum, and while we cant police the content of the PM system, we will take action against members where we are made aware of them breaching the site rules via the PM system.
Not accusing any one just a friendly reminder.
i fully understand the rules of the fourm and will not brake the rules of the fourms even when using the PM system. thanks for the reminder.
got green tick in and its running but doing nothing lol
Hi it would help if i knew what Cam to download lol might be the problem
got green tick in and its running but doing nothing lol
in the mg.cfg what is the box type set to?
this is all my mg.cfg says
M: { 01 }
C: { 01 }
A: { 03 }
U: { 01 } 0x12c0
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 07 }
Q: { 120 }
P: { 00 }
O: { 00 } root password
S: { 00 } 80
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 04 }
D: { 00 }
B: { 00 }
F: { 00 }
try changing B to 06 then restart mgcammd
ive done it lol
i had the wrong ipk grrrrr deleted the others got ccam 2.2.1 and its working
lol
ok how do i add another lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.