Random green screens

[SLOTH]

Hi guys
not had much time to play ...but a few times now my duo has just random greens screened ... dont know why ...wasnt pressing any buttons ...just watching tv and then green !! is this a know bug ?
cheers
sloth

[Sicilian]

Have you run a software update? What version of ViX? Can you post a crashlog please?

[westentertainer]

i have been at it all day trying 1.2 but having loads of green screens [did a software update] my mate having same problem,,trying 1.1 now shame!! it looked good

[mrhdooley]

I have been getting green screens too, somtimes because of epg updating problems, other times for no reason

[Sicilian]

Post your crashlogs so we can get an idea of what's causing the green screens.

[mrhdooley]

<?xml version="1.0" encoding="iso-8859-1" ?>
<opendreambox>
<enigma2>
<crashdate>Mon Nov 8 21:02:34 2010</crashdate>
<compiledate>Nov 2 2010</compiledate>
<contactemail>crashlog</contactemail>
<!-- Please email this crashlog to above address -->
</enigma2>
<image>
<dreamboxmodel>dm8000</dreamboxmodel>
<kernelcmdline>rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 bcmrac=3 console=ttyS0,115200</kernelcmdline>
<imageversion>
<![CDATA[
version=1000201010311428
comment=Vuplus
target=9
creator=Team VIX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
OpenEmbedded Linux %h


Vuplus 2.0.1 %h

]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
Error ]]>
</enigma2software>
<dreamboxsoftware>
<![CDATA[
Error ]]>
</dreamboxsoftware>
<gstreamersoftware>
<![CDATA[
Error ]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
ror
[eDVBCAService] remove channel 0x2d6775c0
[eDVBLocalTimerHandler] remove channel 0x2d6775c0
[eEPGCache] remove channel 0x2d6775c0
allocate channel.. 2d50:013e
[eDVBCAService] new channel 0x2ec04c58!
(1)tune
RotorCmd 0d, lastRotorCmd 13
set rotor timeout to 360 seconds
prepare_sat System 1 Freq 10834000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1084 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:E06:2D50:13E:820000:0:0:0:
allocate demux
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 4
set sequence pos 5
set sequence pos 3
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] idleInputpower[1] is -1
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] setVoltage 3
[SEC] sleep 500ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] idleInputpower[0] is -1
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] set rotor retries 1
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316b0d
[SEC] set timeout 40
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4

[mrhdooley]

[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
FP_IOCTL_GET_LNB_CURRENT failed (Invalid argument)
[SEC] runningInputpower is -1
[SEC] waiting for rotor running -1, idle -1, delta 60
[SEC] rotor not running... reset counter.. increase timeout
[SEC] rotor timout
set sequence pos 2
[SEC] no more rotor retrys
set sequence pos 10
[SEC] update current rotorparams 0 000d 130
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
[SEC] sleep 500ms
(1)fe event: status 0, inversion off, m_tuning 1
action -> SIBwithVZActions ok_but
(1)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x2ec04c58 running
[eDVBLocalTimerHandler] channel 0x2ec04c58 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x2ec04c58 running
stop release channel timer
[EPGC] next update in 2 sec
no version filtering
0012: 4e 0e 06 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (0231), and 1 audio stream(s) (02f9), and the pcr pid is 0231, and the text pid is ffffffff
allocate demux
disable teletext subtitles
decoder state: play, vpid=561, apid=761
DMX_SET_PES_FILTER(0x231) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x2f9) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x231) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
not pauseable.
[AutoRes] service changed
[eDVBLocalTimerHandler] diff is 36
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:58:45
[eDVBLocalTimerHandler] m_time_difference is 36
[eDVBLocalTimerHandler] set Linux Time
[EPGC] start cleanloop
+ 1/1 TID 00
done!
[EPGC] stop cleanloop
[EPGC] 13916111 bytes for cache used
no version filtering
041a: 02 0e 06 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 15 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0231), and 2 audio stream(s) (0295, 02f9), and the pcr pid is 0231, and the text pid is ffffffff
decoder state: play, vpid=561, apid=761
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCAService] new service 1:0:1:E06:2D50:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:E06:2D50:13E:820000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 153 bytes
9f 80 32 81 94 03 0e 06 29 00 19 01 81 08 00 82 00 00 2d 50 01 3e 82 02 01 00 84 02 04 1a 09 04 0b 01 e8 66 1b 02 31 00 1d 01 09 11 01 00 e9 2e 00 68 ff 70 9c 22 00 9a 00 61 c0 28 81 09 07 18 13 e9 2e 02 00 68 06 02 95 00 1d 01 09 11 01 00 e9 2e 00 68 ff 70 9c 22 00 9a 00 61 c0 28 81 09 07 18 13 e9 2e 02 00 68 06 02 f9 00 1d 01 09 11 01 00 e9 2e 00 68 ff 70 9c 22 00 9a 00 61 c0 28 81 09 07 18 13 e9 2e 02 00 68 06 15 b9 00 00 c0 00 d0 00 00 c1 00 d5 00 00
doing version filtering
041a: 02 0e 06 29 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
sdt update done!
[AutoRes] determineContent
[EPGC] start caching events(1289246327)
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
[AutoRes] determineContent
timeout 0012!
action -> GlobalActions volumeUp
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
setValue 50
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
action -> GlobalActions volumeUp
Setvolume: 55 55 (raw)
Setvolume: 29 29 (-1db)
setValue 55
no ancillary data in audio stream... abort radiotext pes parser
[EPGC] nownext finished(1289246354)
nr_read 88981 nr_write 73594
sum 162575 prev_sum 162570
hdd was accessed since previous check!
[IDLE] 0 600 False
It's now Mon Nov 8 20:59:34 2010
next real activation is Mon Nov 8 21:05:37 2010
[timer.py] next activation: 1289246474 (in 99998 ms)
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 14177691 bytes for cache used
It's now Mon Nov 8 20:59:50 2010
next real activation is Thu Nov 11 00:06:40 2010
[timer.py] next activation: 1289246491 (in 99998 ms)
It's now Mon Nov 8 20:59:51 2010
[timer.py] next activation: 1289246491 (in 99996 ms)
nr_read 88981 nr_write 73594
sum 162575 prev_sum 162575
hdd IDLE!
[IDLE] 59.9999830723 600 False
[EPGC] schedule finished(1289246424)
[EPGC] stop caching events(1289246424)
[EPGC] next update in 60 min
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 14208398 bytes for cache used
It's now Mon Nov 8 21:01:14 2010
next real activation is Mon Nov 8 21:05:37 2010
[timer.py] next activation: 1289246574 (in 99997 ms)
nr_read 88981 nr_write 73594
sum 162575 prev_sum 162575
hdd IDLE!
[IDLE] 119.999988079 600 False
It's now Mon Nov 8 21:01:30 2010
[timer.py] next activation: 1289246591 (in 99999 ms)
It's now Mon Nov 8 21:01:31 2010
next real activation is Thu Nov 11 00:06:40 2010
[timer.py] next activation: 1289246591 (in 99996 ms)
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 14208398 bytes for cache used
nr_read 88981 nr_write 73594
sum 162575 prev_sum 162575
hdd IDLE!
[IDLE] 180.000002146 600 False
[SoftCam] Poll alive occured at 1289246554.73
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Plugins/VIX/SoftcamManager/plugin.py", line 564, in query
File "/usr/lib/enigma2/python/Plugins/VIX/SoftcamManager/plugin.py", line 625, in softcam_check
File "/usr/lib/python2.6/subprocess.py", line 621, in __init__
errread, errwrite)
File "/usr/lib/python2.6/subprocess.py", line 1037, in _execute_child
self.pid = os.fork()
OSError: [Errno 12] Cannot allocate memory
(PyObject_CallObject(<bound method StartCamAutoPoller.query of <Plugins.VIX.SoftcamManager.plugin.StartCamAutoPoll er instance at 0x12ab170>>,()) failed)
]]>
</enigma2crashlog>
<pythonMD5sum>
<![CDATA[
Error ]]>
</pythonMD5sum>
</crashlogs>

</opendreambox>

[SLOTH]

Hi sic
i just checked and have update packages ...which i thought i,d done !! will see how it goes ...not getting much time to watch tv at the mo ...starting to get busy at work .
Sloth

[yngvekl]

@mrhdooley

OSError: [Errno 12] Cannot allocate memory
Make a swap file...

[andyblac]

@mrhdooley

Make a swap file...

until v1.3 comes out (hopefully tomorrow :) )

[marty]

until v1.3 comes out (hopefully tomorrow :) )

Great stuff!!!!!!! :)

[SLOTH]

hi ...it says there are to many chararacters in my crash log so added as attachment , still random crashing
cheers
Sloth

[andyblac]

hi ...it says there are to many chararacters in my crash log so added as attachment , still random crashing
cheers
Sloth


this has been fixed for 1.3, in the mean time try creating a swapfile