PDA

View Full Version : What's Your satellite set up??



catseye
17-04-10, 12:42
Can members post here what equipment they are using, box, dish type & size , lnb type & location roughly in Europe (ie North Yorks)

& what sats & channels they can receive (including scrambled channels)

It would be good to hear from members on here regarding satellite reception etc

grtmoby
17-04-10, 12:51
This might be good as a guide as well cats

http://www.vuplus-support.co.uk/showthread.php?337-Satellite-Installation-and-Setup-Tools

Sicilian
17-04-10, 16:08
VU+ Duo, Triax 1.1M Dish on Technomate 2600rotor and fixed mini dish pointing to 28.2, location London. Pickup 28.2, 13deg, 19deg, 5deg, 1deg + more cant remember them all lol!

Clearing scrambled channels would be down to your sub or if you cardshare.

Mart
18-04-10, 10:38
VU+ Duo, Orbital 1m dish, Inverto 0.2dB Single LNB ,Technomate TM-2600 DiSEqC Motor , location N.Ireland

Monty
18-04-10, 10:58
VU+ Duo, 1M Orbital offset dish with TM 2600 motor with TM-4 super high gain Quad LNB.
Zone 2 sly dish fixed.
Located west central Scotland


Updated.

oneforall
18-04-10, 11:04
ATM my dish sits on 1W only :)
Ah, good old Nagra-2. Hrmm. ;)

catseye
18-04-10, 12:07
Channel Master 1.2 meter dish, invercom twin lnb & feedhorn, Moteck vbox positioner & no sat box (yet)

Previous owner of Cuberevo/IP Box 9000HD, Technomate 9100, Humax 5400z, Fortecstar innovative, Pace 508IP, Pace D2mac decoder & one or two sly boxes

Location north worcestershire, england

catseye
18-04-10, 12:11
VU+ Duo, Triax 1.1M Dish on Technomate 2600rotor and fixed mini dish pointing to 28.2, location London. Pickup 28.2, 13deg, 19deg, 5deg, 1deg + more cant remember them all lol!

Clearing scrambled channels would be down to your sub or if you cardshare.

Scill, have you tried Nilesat 7 west (Showtime /Orbit Package) & any channels from the Muiltichoice Africa Package (Eutelsat 36 East) with the Vu & in your location??

bobonthejob
18-04-10, 12:43
90cm Dish, Inverto 0.2dB Dual output LNB ,Technomate TM-2600 DiSEqC Motor , location Leicester.

micscave
18-04-10, 13:06
Orbital 1m Dish, Technomate Gold .1db Quad output LNB, Technomate TM-2600 DiSEqC Motor, Starview HD combo non lan. 53°E to 30°W.
Used to have an Echostar 8700 D2mac - Videocrypt receiver in the 90s (lovely bit of kit that was)

kingy29
19-04-10, 15:18
1.2m dish TM 2200 Super with Inverto Black Prenium Quad LNB, fixed 60cm on Astra 28.2E

dfdream
19-04-10, 15:36
VU+ with OpenPLi, 1.1m Triax, Technomate Gold LNB and TM2600 Motor and second feed from 5x12 multiswitch on 90cm fixed dish with Quattro LNB.

gab2001uk
27-04-10, 02:02
90cm fixed dish 28.2, quattro LNB combined with terrestrial TV and DAB/FM aerials to 24 output Triax multiswitch. Multiplexed cables run to every room with 2 cables per room, 4 cables in lounge, 4 cables in my den. De-multiplexing outputs at cable ends giving sat/TV/FM. Cable runs combined with gigabit ethernet Netgear Dual WAN VPN Firewall router-> Cisco 10/100/1000 managed switch-> 24 x cat6 cables.
Hardware: VU+ Duo, Sly HD box (crashes on ITV HD after 20 mins) Sly+, 4 old Sly boxes of various manufacturers, USB S2 Sat tuner with T-Rex CAM and Predator s/ware (now defunct)

hummer66
27-04-10, 07:42
1m aluminium dish had for ten years,polar mount 36inch actuator, kathrein ufs910 (VU+duo home made shoe box ect soon to be a real one) TechniSat SkyStar USB 2 HD CI netgear DGN3500 Router ( location southampton

Peter
28-04-10, 21:56
88 cm Motorised dish and a 'Sly' type dish for Freesat which came with the TV. TM 6800 HD Patched. Diablo CAM, not used now.
USB HDD for recording. rarely used. Set up mainly used by Grandchildren these days

Likvid
16-05-10, 22:13
Channel Master 120cm dish, Channel Master KU-band feedhorn, Jaeger SMR-1224 motor, Vu+ Duo Rev 2.2 with 1GB HDD, Inverto White Tech 0.3dB C120 LNB
Location: Stockholm, Sweden

OldSkulRide
17-05-10, 07:07
VU+ DUO+ EMP Centauri 9/1 + Wavefrontier T-90 with 7 sats. That is all

Sicilian
17-05-10, 07:14
VU+ DUO+ EMP Centauri 9/1 + Wavefrontier T-90 with 7 sats. That is all

How do you find the Wavefrontier dish? Signal strength/quality ok? Have you compared it to a dish on a motor?

OldSkulRide
17-05-10, 07:35
Everything ok (from 1W to 28.2, i am from Slovenia), just 16E is a bit weaker than on my second dish (on other house) triax 88cm but that is understandable. 16E is weak satellite and dish needs to be alligned 100%. T-90 is hard to set up 100% properly.