parkher
04-02-14, 14:40
Please confirm that everybody has it?
At the edges of the screen there is garbage, mostly at the top, but not only. Sometimes at the bottom and some at the left and/or right side too.
Exactly the same channels with Vu+ Ultimo (still with ViX image 2.4 build 213 from 2012) - everything OK, no garbage at all.
My Duo 2 has ViX image 3.0 build 808 - the last available, but new images used to show up several times a day and stopped completely after December 21.
Because everything is digital at all the stages after the initial signals decoding I don't understand how there can be any differences between Ultimo and Duo 2.
If it is a software problem, or driver problem - then everybody has it?
If only I have it - then it is a hardware problem, but how can it be a hardware problem?
Is there a plugin, perhaps, which allows to fine-tune the screen size and position?
The problem became very unpleasant after I learned that Panasonic will no longer make plasma TVs and grabbed 65" VT60.
On this TV there is an option in 16:9 mode: overscan off / on.
With Ultimo, overscan on is not even needed - the picture is perfect anyway.
With Duo 2, even after switching overscan on, still some garbage is remaining. Not much, but some - which may cause a burn in on a new TV.
So I have to switch to zoom mode. In that mode the TV allows to zoom and move the picture only vertically, unfortunately.
It is not enough. There is only one step of horizontal zoom - and a very large step (when changing channels, the first three letters of the channel name are cut off together with the garbage). Afterwards, to fix the aspect ratio, I need to apply much more vertical zoom than needed too.
So these are imperfections of the TX-P65VT60E TV, or I did not find yet some settings in it. I would like to have a very fine step zoom with the fixed aspect ratio + shifting in x and y directions.
But the fact remains that with Ultimo - no overscan garbage at all, I can keep 16:9 with overscan off and with horizontal zoom off.
So I need some zooming of the size on the Duo 2 itself then.
I tried swapping hdmi inputs on the TV and hdmi cables, and also the same garbage is on a different TV too.
I did not try the other tuner on Duo 2 yet, and I am using different dish (so, different lnb) even though the satellite and the channels are the same.
Perhaps I shoud try swapping tuners and swapping dishes too.
Any help appreciated...
At the edges of the screen there is garbage, mostly at the top, but not only. Sometimes at the bottom and some at the left and/or right side too.
Exactly the same channels with Vu+ Ultimo (still with ViX image 2.4 build 213 from 2012) - everything OK, no garbage at all.
My Duo 2 has ViX image 3.0 build 808 - the last available, but new images used to show up several times a day and stopped completely after December 21.
Because everything is digital at all the stages after the initial signals decoding I don't understand how there can be any differences between Ultimo and Duo 2.
If it is a software problem, or driver problem - then everybody has it?
If only I have it - then it is a hardware problem, but how can it be a hardware problem?
Is there a plugin, perhaps, which allows to fine-tune the screen size and position?
The problem became very unpleasant after I learned that Panasonic will no longer make plasma TVs and grabbed 65" VT60.
On this TV there is an option in 16:9 mode: overscan off / on.
With Ultimo, overscan on is not even needed - the picture is perfect anyway.
With Duo 2, even after switching overscan on, still some garbage is remaining. Not much, but some - which may cause a burn in on a new TV.
So I have to switch to zoom mode. In that mode the TV allows to zoom and move the picture only vertically, unfortunately.
It is not enough. There is only one step of horizontal zoom - and a very large step (when changing channels, the first three letters of the channel name are cut off together with the garbage). Afterwards, to fix the aspect ratio, I need to apply much more vertical zoom than needed too.
So these are imperfections of the TX-P65VT60E TV, or I did not find yet some settings in it. I would like to have a very fine step zoom with the fixed aspect ratio + shifting in x and y directions.
But the fact remains that with Ultimo - no overscan garbage at all, I can keep 16:9 with overscan off and with horizontal zoom off.
So I need some zooming of the size on the Duo 2 itself then.
I tried swapping hdmi inputs on the TV and hdmi cables, and also the same garbage is on a different TV too.
I did not try the other tuner on Duo 2 yet, and I am using different dish (so, different lnb) even though the satellite and the channels are the same.
Perhaps I shoud try swapping tuners and swapping dishes too.
Any help appreciated...