View Full Version : More than 4 LNBs-please help
Hi all,
I’ve bought the gigablue quad and everything is working fine, it’s connected to 4-way diseqc switch (for 4 satellites) and as mentioned everything is ok.
I would like to add a fifth LNB and use 8 way diseqc switch but in the receiver I can choose only 4 satellites, how can I add a fifth LNB in the receiver?
Help please
Many thanks
See if this Post helps....
http://www.world-of-satellite.com/showthread.php?12955-8-way-diseqc&p=93807&viewfull=1#post93807
See if this Post helps....
http://www.world-of-satellite.com/showthread.php?12955-8-way-diseqc&p=93807&viewfull=1#post93807
Correct option is option 2,I have 8 lnb's on my EMP Centauri...
Option 2
lnb1----->Uncommited input 1
lnb2----->Uncommited input 2
lnb3----->Uncommited input 3
lnb4----->Uncommited input 4
lnb5----->Uncommited input 5
lnb6----->Uncommited input 6
lnb7----->Uncommited input 7
lnb8----->Uncommited input 8
Hi all,
I’ve bought the gigablue quad and everything is working fine, it’s connected to 4-way diseqc switch (for 4 satellites) and as mentioned everything is ok.
I would like to add a fifth LNB and use 8 way diseqc switch but in the receiver I can choose only 4 satellites, how can I add a fifth LNB in the receiver?
Help please
Many thanks
I have 7 feeds on my dish and use a disecq 1.1 switch with eight inputs. Each input = "Uncommited #" (where # is the number of the feed) in the Vix setup
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.