Samsung code is 2448
1. TV setting
Set-up Sequence: <<1 + 3>>, <4digit brand-code>, <<Mute or Power>>
1.
Press number 1and 3 for three seconds until LED is on.
2.
Find your TV brand-code from the TV code list and insert 4 digit code.
- If you press ¡°0000¡±, Full Automatic Scan will start. This will take a while.
3.
Keep Mute button (or Power) pressed until your TV is muted (or turned off).
4.
If your TV is muted (or turned off), stop pressing Mute button.
5.
Now, your RCU is in test mode and press Volume + /- to check if your TV responds.
6.
If the volume buttons are operational, Press <OK + STOP ( )> to escape from the set-up mode.
2. AV setting
AV button is for the selection of TV video source. AV button may be automatically set up dependingon TV
models. In case it is not automatically configured, please follow the instructions below.
Set-up Sequence <<1 + 9>>, <<AV>>
1.
Press 1 and 9 for three seconds until LED is turned on.
2.
Keep AV button pressed until your TV responds and displays the video input source.
3.
If AV button is working, check if AV button is properly working several times.
4.
Press <OK + STOP ( )> to escape from the set-up mode.