View Full Version : Switching between tuners
madaboutlotus
13-01-14, 12:43
I am setting up my new quad with tuner a on a fixed fish and tuner b on a motorised dish. Is there a button sequence on the remote to switch between the tuners or does it do that automatically on channel selection (even though I have not been able to set up any channels on the motor dish at the moment)
Sent from my GT-I9100 using Tapatalk
abu baniaz
13-01-14, 12:53
Does it automatically. Just disable the 28.2 tuner for now until you have aligned your motorised system.
Transfer a channel list such as vhannibals/catseye. You won't have to scan then.
stevejd2001
13-01-14, 12:58
Set yiur fixed dish as preffered tuner so if viewing or recording sky it leaves motor free
ViX doez that automatically - assuming that's what you are using.
Sent from my GT-I9305 using Tapatalk
Rob van der Does
13-01-14, 14:13
Just leave 'preferred tuner' to the default value 'Auto'.
abu baniaz
13-01-14, 14:20
Remove your meter before testing for channels.
madaboutlotus
14-01-14, 10:00
Thanks Guys for all you tips. I'll download the channel list in advance of some tweeking.
madaboutlotus
14-01-14, 10:01
ViX doez that automatically - assuming that's what you are using.
Sent from my GT-I9305 using Tapatalk
Yes I am using Vix, best image I have used.
madaboutlotus
14-01-14, 16:21
In the tuner setup in the Tune menu, what does the Calibrate function do?
Sent from my GT-I9100 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.