View Full Version : 2 boxes... one with a feed and one without...
Hey guys
I have a spare gigablue 800 se due to me upgrading from duo to giga quad.
My question is can I put this box in my uncle room without a satellite feed using romotestreamconverter or something similar?
The setup in his house is...
Livingroom- gigablue hd 800 se
Satelite feed
Connected to internet via homeplug
And the idea is to....
Connect another gigablue hd 800 se in his bedroom without a satellite feed but connected to internet
Can it be done? Is there any limitations?
Sent from my GT-I9300 using Tapatalk
Yes, Can easily be done using another homeplug.
Only limitation is that when its in use, it will tie up one of the tuners on the quad.
Sent from my Nexus 4 using Tapatalk
sanderson82
02-01-14, 13:01
I'd be interested in a similar setup. My assumption was that each sat box would need it's own feed from the dish.
Can you elaborate more?
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Can you elaborate more?
Not much to elaborate on.
Having feeds from your dish to all tuners is obviously best, however if you don't have a feed from the dish & have boxes on the same network, you can 'borrow' a tuner from another box over the network.
sanderson82
02-01-14, 14:07
Can I assume all boxes need to be enigma2?
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Yes, Can easily be done using another homeplug.
Only limitation is that when its in use, it will tie up one of the tuners on the quad.
Sent from my Nexus 4 using Tapatalk
I shouldve just left the mention about quad.
The house in question ONLY has a gigablue hd 800 se and I was wondering if I could add another gigablue hd 800 se via homeplug
So basically its 2 single tuner boxes
Sent from my GT-I9300 using Tapatalk
If you have only 1 tuner you will have no tuner left if you enable remote stream on another box.
You need at least 2 tuners in the main box to do what you do and really you need more.
If the second box is on all the time then you will only have 1 tuner left to watch and record TV.
I have a DUO2 with 4 SAT tuners and use 2 Raspberry PIs to stream to 2 other TVs and often see that the 2 tuners left are often gone with recordings.
So if its regular use you should aim for 4 tuners.
I shouldve just left the mention about quad.
The house in question ONLY has a gigablue hd 800 se and I was wondering if I could add another gigablue hd 800 se via homeplug
So basically its 2 single tuner boxes
Sent from my GT-I9300 using Tapatalk
Can I assume all boxes need to be enigma2?
Yes.
The house in question ONLY has a gigablue hd 800 se and I was wondering if I could add another gigablue hd 800 se via homeplug
So basically its 2 single tuner boxes
Can still be done, but the tuner will be used by one of the boxes limiting what can be viewed on the other box at the same time.
So basically it will have the same limitations as using a twin tuner with a single feed setup as a loopthrough to the other tuner when recording??
Sent from my GT-I9300 using Tapatalk
So basically it will have the same limitations as using a twin tuner with a single feed setup as a loopthrough to the other tuner when recording??
No, a twin tuner using loopthough will still have more recording/viewing options than a single tuner, shared or not.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.