Tuner Configuration

[stav81244]

I need some help with the tuner configuration on my TM Twin

I have always have the following:

Main Tuner A as USALS which is set positioner settings
Tuner B as equal to Tuner A

This works when i record one program which lets me watch another but if i change tuner B to anything else it does not let me do anything when tuner A is used.

The main problem for my query is when i move the satellite it sometimes used tuner B to move the dish which is not possible as Tuner A is the motorised tuner. Can someone please help which settings i need.

[abu baniaz]

You should be using loop through setting.

Have you got any more cabling?

[stav81244]

You should be using loop through setting.

Have you got any more cabling?

I have tried the loopthrough and this dont work it wont let me record and watch another program, only equal does. Is my set up below right?

I have a quad LNB with 2 going to my TM Twin and one going to my TM800 in another room. In the back of the Twin i have the motored wire in LNB 1 and the extra on in LNB 2.

[abu baniaz]

Sorry, I assumed you had only 1 cable.

For a motorised setup quad lnb, the one from motor set to usals. The other other tuner should be set as 2nd cable of motorised dish.