View Full Version : fresh flash problem
Hi guys but of a strange problem here, loaded new vix build (806)on to usb to reflash my box as having issues with it not seeing network mounts, so plugged in usb rebooted( i have flashed my box many times before with no issues) but i dont see the message anymore to press ok? it just goes straight to trying to rebooting up? any ideas? cheers :)
my current build is 796
Can't you use image manage to up load new image ?
I had a similar issue when I used a new usb stick the receiver just wouldn't recognise it. I went back to my old usb2 stick and all was well again.
Sent from my GT-I9505 using Tapatalk
I had a similar issue when I used a new usb stick the receiver just wouldn't recognise it. I went back to my old usb2 stick and all was well again.
Sent from my GT-I9505 using Tapatalk
This is the same usb ive used for past 18 months or so, i use it to store epg on, so i dont understand why it dosnt see it for flashing an image.
just tried another usb stick and still it just goes straight to booting, any ideas?
Have you the correct folder & file structure on the USB stick?
yes mate. have flashed it lots of times before, now it wont show the message that its found an update.
ok given up on usb re-flash i have no idea why it wont work anymore, had to do it via online.
Rob van der Does
22-12-13, 05:58
1- Make sure no other USB-ports are in use
2- Try other USB-port
3- If in the end nothing works, you can also flash via ImageManager.
Try the following:
1) Max Size 8GB USB stick.
2) User REAR USB port.
3) Format your USB stick FAT32 using this tool here http://www.world-of-satellite.com/showthread.php?45-HP-USB-Stick-Drive-Format-Tool
If the above doesn't work try with a GENUINE Kingston USB stick Formatted with the above HP Tool.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.