PDA

View Full Version : Wont flash stuck with BH image !


Davon
30-11-13, 09:31
Hi trying to get a BH image of my solo2 and put vix on .
I have formatted usb and tried 2 images but keeps starting up BH and wont flash any ideas please
wullboy
30-11-13, 09:38
You should only have the image your tying to flash from your usb stick, on your usb stick, make sure there is nothing else on it, and make sure the image is within its correct flolder ??
Larry-G
30-11-13, 09:40
Read this and see if it helps.

http://openvix.co.uk/index.php?dir=Guides%20and%20Tutorials/&file=How%20to%20flash%20a%20Vu%2B%20Solo2.pdf
Davon
30-11-13, 10:03
All done as you say but still will not flash :confused:
Larry-G
30-11-13, 10:13
Please list the entire process your going through each time you attempt to flash the receiver, along with the results at each step.
Stanman
30-11-13, 10:17
Have you remove other USB sticks

Sent from my GT-I9305 using Tapatalk
river-rat
30-11-13, 11:03
i had this problem mate with 5 usb sticks and was in fact the sticks, used a new one today and brought my dead box to live:thumbsup:
Donnie
30-11-13, 17:24
Make sure you have no backup's on USB or HDD
abols
12-12-13, 15:22
I make a video how i flashing vu solo 2, and take some pic of my problem!!!
I hope someone can help me :(

https://www.youtube.com/watch?v=rvYfJc5_C8w
After flashing and set up all, i have only this (pic 31077) there r only OSD menu and sound from tv channel but no video.
An RC wont work, when i push any buttom, its open this (pic 31076)
31076 31077
DaMacFunkin
12-12-13, 15:57
Looks like a dodgy skin, change the skin back to default and reboot the box.
abols
12-12-13, 16:32
Looks like a dodgy skin, change the skin back to default and reboot the box.

Its dont help
wullboy
12-12-13, 19:00
Why dont you put the original image back on to the box, and see if it will load it, if so, then it might be a doggu image your tying to flash or, its a clone box, and i`st not loading vix on to it !!!
Sicilian
12-12-13, 19:33
I make a video how i flashing vu solo 2, and take some pic of my problem!!!
I hope someone can help me :(

https://www.youtube.com/watch?v=rvYfJc5_C8w
After flashing and set up all, i have only this (pic 31077) there r only OSD menu and sound from tv channel but no video.
An RC wont work, when i push any buttom, its open this (pic 31076)
31076 31077

Front panel circuit board on your unit needs replacing. The blue touch button is blinking and starts to flash without you touching it. Contact where you purchased.
Cohibastevie
13-12-13, 00:44
Is that a sandisk cruzer fit USB stick?