PDA

View Full Version : Receiver not working in another house


monty632
27-11-13, 19:56
I have recently upgraded from an F3 to a TM Nano.
Everything is working fine in my house and am really happy.
Decided to show the old man it in operation so brought it over to his (he also has an F3).

Plugged it in and I got Tune Fail. I couldnt find a single channel.
We have swapped F3's in the past with no problem. I even had my old one with me and tried that and they worked fine.

Probably a stupid question but is there something that needs to be done when moving a receiver around or do they require a better satellite lnb/dish? His would be alot older than mine.

Just thought I would ask as hopefully moving house soon and would like to know any problems in advance.
Plus he will no doubt be looking one at some stage.

Thanks
abu baniaz
27-11-13, 21:10
have you checked the f plug to make sure there is no short/ it is connected properly.

Sent from my NexusHD2 using Tapatalk
duoduo
27-11-13, 21:17
Are you trying to view fta or subscribed channels?
monty632
27-11-13, 21:54
have you checked the f plug to make sure there is no short/ it is connected properly.

Sent from my NexusHD2 using Tapatalk

Yeah checked that and created a new one. It was working with the F3.
monty632
27-11-13, 21:54
Are you trying to view fta or subscribed channels?

No channels are working. Scan brought up nothing.
monty632
27-11-13, 21:56
Yeah checked that and created a new one. It was working with the F3.

He has another cable upstairs and the same was happening with that too.

Thanks
duoduo
27-11-13, 22:02
Sorry to confirm are you talking about the f3 or TM Nano?
monty632
27-11-13, 22:09
No problem, I'm talking about the Nano.
All is fine with the F3 we have swapped them about numerous times (eg. I have brought mine over to my dads) and all has been fine.

I assumed the Nano was plug and play as it has been working at my house but all I got was tuner fail and no channels.
He has 2 cables both running into seperate rooms which work 100% on the F3s but not one would work on the Nano.
Mr. Mister
27-11-13, 22:11
Plug it back in at your dads.. and run ABM.. Then do a reboot..

Should be fine after that..
monty632
27-11-13, 22:42
Plug it back in at your dads.. and run ABM.. Then do a reboot..

Should be fine after that..

Cheers will have a go the next time I'm round.


Thanks