View Full Version : help neede to set up fixed and motorised.
hi guys, well im ready to start programming my vu+solo2, however i cant find a guide to setting up my tuner, i am using usals and i would like to set up tuner a to 28.2 fixed sly and tuner b to motorised. im sorry for my first post is needing but i cant find the info . cheers guys,
B needs to be
simple positioner
than enter your lat and longtitiude making sure you enter them right way round
Can you explain why B needs to be simple positioner please
You can have either, I prefer using B as my motor
DaMacFunkin
14-11-13, 20:31
Don't you also need to find 0.8w and set that as position 1?
Ok thanks, I have my positioner setup on A and having problems with B, I thought this may be the issue.
Sorry for hijacking the thread.
That should have been done when the dish was installed
im very grateful for all the replies so far guys,i was wondering is there a sticky i can refer to anywhere to help me with this?
DaMacFunkin
15-11-13, 13:54
That should have been done when the dish was installed
Yes I know but I had a situation a few weeks back where my box wouldn't boot and every time I reflashed it would crash trying to restore settings do I had to re setup my motorised from scratch, I was nearly crying ...
Rob van der Does
17-11-13, 07:19
Don't you also need to find 0.8w and set that as position 1?
Using USALS you don't have 'positions'.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.