View Full Version : A5H Problem
Hi all i loaded a tv list (not sure what went wrong) reset box and now it says A5H i have tried EVERYTHING I have a null 9 pin female to female i have read ALL the guides but still all i get on the STB EROM software is..... Synchronizing STBs please reset target! i think the port is faulty but im not sure so thats why im asking you guys to see if i missed anything. If i had known the only way to recover is by a Null lead i would have gone for a different stb.
Follow this guide to the letter http://www.world-of-satellite.com/showthread.php?20580-Guide-to-RS232-flash-or-Recover-Ferguson-Ariva
Power off receiver.
Start the recovery software on PC
Synchronizing STBs please reset target <<< When you get that message power on the unit. If your RS232 is setup correctly the software will detect the receiver.
Follow this guide to the letter http://www.world-of-satellite.com/showthread.php?20580-Guide-to-RS232-flash-or-Recover-Ferguson-Ariva
Power off receiver.
Start the recovery software on PC
Synchronizing STBs please reset target <<< When you get that message power on the unit. If your RS232 is setup correctly the software will detect the receiver.
Hi mate thanks for the quick reply, i have tried that (for the past 2 days) but nothing i have even loaded xp on my pc to see if it would work with that but nothing.
This is as far as i get
30290
Could be your serial port on PC.
What exact channel list did you load up?
No port has been used before was ok it was a custom one that I done with the editing software
Sent from my GT-I9300 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.