PDA

View Full Version : Weird behaviour, screen resolution


MrFun
07-11-13, 23:09
Hi,

I've installed 3.0.770 on both my VU+ Solo's. One thing I noticed after using 2.3 for a long time, and 3.0.730 for a shorter time, is that with the new software the receiver behaves differently when I switch between a HD channel and a regular channel. The screen flicks and changing channel is slower than before. In older soft it was possible to define what default resolution receiver should have. Now I can't find that setting. Behaviour is the same on two units with two different screens. Is this a bug or is it intended to work this way?

/BR
shadows
08-11-13, 12:13
my box is coming up 720p when i restart it even though the setting is 1080p. i have to change it to 720 then back to 1080 to get hd. this after latest update thanks.
eattheliving
08-11-13, 21:17
Hi Guy's,

how did you update to this image version? If it's an online update then you will have issues.

You have to do a proper install from usb etc. I had to and all is well again on my boxes.

Hope this helps.
MrFun
08-11-13, 22:51
?!?!?

Thanks for the reply.

I did a online update from a flash programmed 3.0.753 to 3.0.775

I can give it a try to flash update to the latest and see if it makes any difference.

/BR
judge
08-11-13, 23:01
any build above 760 required a fresh flash, not an online update.
shadows
09-11-13, 21:22
so i have to flash the full image in again. were do i get this and wont it delete all my pluggins thanx
judge
09-11-13, 21:33
You can do a settings back up & restore them on a fresh flash.
Images can be found on http://openvix.co.uk
duoduo
09-11-13, 22:03
Or blue button, vix, image manager, download. Do a settings Backup first.
shadows
10-11-13, 10:58
how do i do a settings back up thanks
shadows
10-11-13, 11:02
Or blue button, vix, image manager, download. Do a settings Backup first.

thought this had to be done with a usb thanks
Larry-G
10-11-13, 11:08
how do i do a settings back up thanks

Blue button > ViX > Backup manager.


thought this had to be done with a usb thanks

if your flashing from a different image to ViX then you would need to use the USB stick, but if your already using ViX ( newer images only ) you can use the Image manager to flash the receiver directly without the need for a USB stick. Just download the image from the server to the receiver and press the restore button, the flash should take 2 to 4 minutes.
shadows
10-11-13, 11:44
cheers sorted .now there a restore wizard in the flash that helps.. 1080 back to normal thanks
MrFun
15-11-13, 12:01
Hi all,

I can confirm that it now works as before, after doing a USB Flash programming.

Thanks for help and support.

/BR