no23
07-11-13, 04:21
in the last day when I set a timer the box crashes or when I record manually, never had this problem before
its also happening on 3 vu duos in the last 2 days.
I flashed ultimo again but still the same
ive not tried posting crashlog before , so not sure if this is right one
?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Thu Nov 7 03:07:41 2013</crashdate>
<compiledate>Nov 6 2013</compiledate>
<contactemail>vixlogs@world-of-satellite.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>skin.xml</skin>
<sourcedate>2013-11-06</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>ultimo</stbmodel>
<kernelversion>
<![CDATA[
Linux vuultimo 3.1.1 #1 SMP Thu Oct 31 22:57:23 CET 2013 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=vuultimo
build_type=0
version=3.0
build=776
drivers=20131023
date=20131106010054
comment=ViX
target=9
creator=openViX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to OpenViX for %h
openvix 3.0 %h
]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</enigma2software>
<vuplussoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</vuplussoftware>
<gstreamersoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
opening frontend 2
close frontend 2
found 1 adapter, 3 frontends(3 sim) and 5 demux, boxtype 4
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
found 19 spinner!
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[Harddisk] enumerating network mounts...
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: single
slot: 2 configmode: simple
diseqcmode: single
sec config completed
[Picon] adding path: /media/hdd/picon/
[InfoBar] Failed to load resumepoints:
[Time By]: NTP
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[Ipkg] Added to OPKG destinations: /media/hdd
[Ipkg] Added to OPKG destinations: /
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
- double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language English (UK)
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: scale
cannot open /proc/stb/avs/0/input_choices
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] /media/hdd/epg.dat not found, try /epg.dat
couldn't open /proc/stb/misc/12V_output
setLCDBrightness 25
setLCDBrightness 127
setLEDBlinkingTime 5
setLEDNormalState 1
setLEDBlinkingTime 1
setLEDNormalState 1
setLEDNormalState 3
Setting OSD position: 14 692 12 553
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
[SKLDR] Loading skin /usr/lib/enigma2/python/Plugins/Extensions/XBMCAddons/skin.xml
[SKLDR] Loading skin /usr/lib/enigma2/python/Plugins/Extensions/XBMCAddons/skin.xml
Plugin Extensions/WebInterface failed to load: No module named plugin
IPTV-List-Updater set language to en
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TSmedia/MyriadPro-Regular.otf...OK (RegularIPTV)
<RemoteControlCode> Write Remote Control Code : 2
[XMLTVImport] autostart (0) occured at 1383793584.75
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 2 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
starting hotplug handler
[Timer] Record RecordTimerEntry(name=Cheers, begin=Wed Nov 6 19:29:00 2013, serviceref=1:0:19:F5E:7D3:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Thu Nov 7 08:59:00 2013, serviceref=1:0:19:F3F:808:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Thu Nov 7 09:59:00 2013, serviceref=1:0:19:F3F:808:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Thu Nov 7 12:09:00 2013, serviceref=1:0:1:197A:7D6:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Jonathan Ross Show, begin=Thu Nov 7 22:34:00 2013, serviceref=1:0:19:2710:801:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=Cheers, begin=Tue Nov 5 19:29:00 2013, serviceref=1:0:19:F5E:7D3:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=River City, begin=Tue Nov 5 19:59:00 2013, serviceref=1:0:19:22C5:80D:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Wed Nov 6 12:09:00 2013, serviceref=1:0:1:197A:7D6:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=Cheers, begin=Wed Nov 6 18:59:00 2013, serviceref=1:0:19:F5E:7D3:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=Thu 07 Nov 2013 03:06:25 GMT)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=Thu 07 Nov 2013 03:06:25 GMT)
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Thu 07 Nov 2013 03:06:25 GMT
[XMLTVImport] autostart (0) occured at 1383793585.1
[XMLTVImport] WakeUpTime now set to -1 (now=1383793585)
[SKIN] No skin to read...
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
[Skin] Attribute not implemented: alphatest value: blend
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[LogManager] Trim Poll Started
[LogManager] Trash Poll Started
[NTP]: Updating
playing 1:0:19:F13:7D5:2:11A0000:0:0:0:
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=0.000000 cache=1 resize=1 bg=#FF000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=0.000000 cache=1 resize=1 bg=#FF000000
[Picload] decode picture... /usr/share/enigma2/skin_default/picon_default.png
[Picload] decode picture... /usr/share/enigma2/skin_default/picon_default.png
RemovePopup, id = ZapError
allocate channel.. 07d5:0002
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11797500 Pol 0 SR 29500000 INV 2 FEC 3 orbpos 282 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1197 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:F13:7D5:2:11A0000:0:0:0:
allocate demux
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[LogManager] probing folders
[SEC] set static current limiting
child has terminated
pipes closed
0.0.0.0
192.168
child has terminated
pipes closed
[LogManager] found following log's: ['/home/root/logs']
[LogManager] looking in: /home/root/logs
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[SEC] invalidate current switch params
executing opkg --add-dest /media/hdd:/media/hdd --add-dest /:/ update
job Components.Task.Job name=OnlineVersionCheck #tasks=1 completed with [] in None
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x21387a0 running
[eEPGCache] channel 0x21387a0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
RemovePopup, id = ZapError
PATready
use pmtpid 0103 for service_id 0f13
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 090c
allocate demux
decoder state: play, vpid=515, apid=663
DMX_SET_PES_FILTER(0x203) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x297) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x203) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x90c) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
enable teletext subtitle page 088
[eDVBCAService] new service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
sdt update done!
VIDEO_GET_EVENT - ok
REF: 1:0:19:F13:7D5:2:11A0000:0:0:0:
IS STREAM: False
TEST 1: 400
VIDEO_GET_EVENT - ok
REF: 1:0:19:F13:7D5:2:11A0000:0:0:0:
IS STREAM: False
TEST2: 400
VIDEO_GET_EVENT - ok
REF: 1:0:19:F13:7D5:2:11A0000:0:0:0:
IS STREAM: False
TEST2: 400
config port: HDMI
config mode: 1080i
config res: 1080
config pol: i
config rate: 50
current mode: 1080i50
current res: 1080
current pol: i
current rate: 50
video height: 1080
video width: 1920
video pol: p
video rate: 25000
new res: 1080
new pol: p
new rate: 25
config.av.autores: all
config.av.autores_sd: 720p
config.av.autores_deinterlace: False
new mode: 1080p25
CURRENT MODE: 1080i50
NEW MODE: 1080p25
[VideoMode] setMode - port: HDMI, mode: 1080p25
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: scale
[EPGC] start caching events(1383793590)
child has terminated
pipes closed
executing opkg --add-dest /media/hdd:/media/hdd --add-dest /:/ list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
child has terminated
pipes closed
[OnlineVersionCheck] 2 Updates available
send: 'GET /feeds/3.0/status HTTP/1.0\r\nHost: enigma2.world-of-satellite.com\r\nUser-Agent: Python-urllib/1.17\r\n\r\n'
reply: 'HTTP/1.1 200 OK\r\n'
header: Date: Thu, 07 Nov 2013 03:06:34 GMT
header: Server: Apache
header: Last-Modified: Sun, 27 Oct 2013 21:29:34 GMT
header: Accept-Ranges: bytes
header: Content-Length: 1
header: Connection: close
header: Content-Type: text/plain
poll: unhandled POLLERR/HUP/NVAL for fd 60(16)
child has terminated
pipes closed
[NTP]: setting E2 time: 1383793596.37
poll: unhandled POLLERR/HUP/NVAL for fd 56(16)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1383793598)
[EPGC] stop caching events(1383793598)
[EPGC] next update in 60 min
KEY: 393 PVR
KEY: 393 PVR
action -> InfobarActions showMovies
[InfoBar] Failed to load resumepoints:
KEY: 174 EXIT
action -> OkCancelActions cancel
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:F13:7D5:2:11A0000:0:0:0:
disable dvb subtitles
disable teletext subtitles
enable teletext subtitle page 088
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
playing 1:0:19:F13:7D5:2:11A0000:0:0:0:
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:F13:7D5:2:11A0000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 090c
decoder state: play, vpid=515, apid=663
DMX_SET_PES_FILTER(0x203) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x297) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x203) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x90c) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
enable teletext subtitle page 088
[eDVBCAService] new service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:F13:7D5:2:11A0000:0:0:0:
RemovePopup, id = ZapError
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
PATready
use pmtpid 0103 for service_id 0f13
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 090c
decoder state: play, vpid=515, apid=663
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
KEY: 174 EXIT
KEY: 401 BLUE
KEY: 401 BLUE
action -> InfobarExtensions extensions
KEY: 174 EXIT
action -> WizardActions back
KEY: 174 EXIT
KEY: 139 MENU
action -> InfobarMenuActions mainMenu
KEY: 139 MENU
KEY: 103 UP
KEY: 103 UP
KEY: 352 OK
action -> OkCancelActions ok
KEY: 352 OK
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 352 OK
action -> OkCancelActions ok
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:F13:7D5:2:11A0000:0:0:0:
disable dvb subtitles
disable teletext subtitles
enable teletext subtitle page 088
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
KEY: 352 OK
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]
dvb time sync disabled... so set RTC now to current linux time! 2013/11/07 03:07
set wakeup time to 2013/11/07 08:54
recordTimerWakeupAuto True
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 695, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 607, in runScreenTest
session.nav.shutdown()
File "/usr/lib/enigma2/python/Navigation.py", line 190, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 965, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 762, in saveTimer
IOError: [Errno 28] No space left on device
------------------------------------------------------------
(exit code 5)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>
its also happening on 3 vu duos in the last 2 days.
I flashed ultimo again but still the same
ive not tried posting crashlog before , so not sure if this is right one
?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Thu Nov 7 03:07:41 2013</crashdate>
<compiledate>Nov 6 2013</compiledate>
<contactemail>vixlogs@world-of-satellite.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>skin.xml</skin>
<sourcedate>2013-11-06</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>ultimo</stbmodel>
<kernelversion>
<![CDATA[
Linux vuultimo 3.1.1 #1 SMP Thu Oct 31 22:57:23 CET 2013 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=vuultimo
build_type=0
version=3.0
build=776
drivers=20131023
date=20131106010054
comment=ViX
target=9
creator=openViX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to OpenViX for %h
openvix 3.0 %h
]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</enigma2software>
<vuplussoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</vuplussoftware>
<gstreamersoftware>
<![CDATA[
Collected errors:
* opkg_conf_load: Could not create lock file /var/lib/opkg/lock: No space left on device.
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
opening frontend 2
close frontend 2
found 1 adapter, 3 frontends(3 sim) and 5 demux, boxtype 4
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
found 19 spinner!
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[Harddisk] enumerating network mounts...
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: single
slot: 2 configmode: simple
diseqcmode: single
sec config completed
[Picon] adding path: /media/hdd/picon/
[InfoBar] Failed to load resumepoints:
[Time By]: NTP
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[Ipkg] Added to OPKG destinations: /media/hdd
[Ipkg] Added to OPKG destinations: /
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
- double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language English (UK)
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: scale
cannot open /proc/stb/avs/0/input_choices
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] /media/hdd/epg.dat not found, try /epg.dat
couldn't open /proc/stb/misc/12V_output
setLCDBrightness 25
setLCDBrightness 127
setLEDBlinkingTime 5
setLEDNormalState 1
setLEDBlinkingTime 1
setLEDNormalState 1
setLEDNormalState 3
Setting OSD position: 14 692 12 553
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
[SKLDR] Loading skin /usr/lib/enigma2/python/Plugins/Extensions/XBMCAddons/skin.xml
[SKLDR] Loading skin /usr/lib/enigma2/python/Plugins/Extensions/XBMCAddons/skin.xml
Plugin Extensions/WebInterface failed to load: No module named plugin
IPTV-List-Updater set language to en
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TSmedia/MyriadPro-Regular.otf...OK (RegularIPTV)
<RemoteControlCode> Write Remote Control Code : 2
[XMLTVImport] autostart (0) occured at 1383793584.75
[AutoTimer] Auto Poll Enabled
[SoftcamManager] AutoStart Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 2 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
starting hotplug handler
[Timer] Record RecordTimerEntry(name=Cheers, begin=Wed Nov 6 19:29:00 2013, serviceref=1:0:19:F5E:7D3:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Thu Nov 7 08:59:00 2013, serviceref=1:0:19:F3F:808:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Thu Nov 7 09:59:00 2013, serviceref=1:0:19:F3F:808:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Thu Nov 7 12:09:00 2013, serviceref=1:0:1:197A:7D6:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Jonathan Ross Show, begin=Thu Nov 7 22:34:00 2013, serviceref=1:0:19:2710:801:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=Cheers, begin=Tue Nov 5 19:29:00 2013, serviceref=1:0:19:F5E:7D3:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=River City, begin=Tue Nov 5 19:59:00 2013, serviceref=1:0:19:22C5:80D:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=The Bill, begin=Wed Nov 6 12:09:00 2013, serviceref=1:0:1:197A:7D6:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[Timer] Record RecordTimerEntry(name=Cheers, begin=Wed Nov 6 18:59:00 2013, serviceref=1:0:19:F5E:7D3:2:11A0000:0:0:0:, justplay=0, isAutoTimer=0)
[ImageManager] AutoStart Enabled
[ImageManager] Backup Schedule Disabled at (now=Thu 07 Nov 2013 03:06:25 GMT)
[BackupManager] AutoStart Enabled
[BackupManager] Backup Schedule Disabled at (now=Thu 07 Nov 2013 03:06:25 GMT)
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Thu 07 Nov 2013 03:06:25 GMT
[XMLTVImport] autostart (0) occured at 1383793585.1
[XMLTVImport] WakeUpTime now set to -1 (now=1383793585)
[SKIN] No skin to read...
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
[Skin] Attribute not implemented: alphatest value: blend
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[LogManager] Trim Poll Started
[LogManager] Trash Poll Started
[NTP]: Updating
playing 1:0:19:F13:7D5:2:11A0000:0:0:0:
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=0.000000 cache=1 resize=1 bg=#FF000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=0.000000 cache=1 resize=1 bg=#FF000000
[Picload] decode picture... /usr/share/enigma2/skin_default/picon_default.png
[Picload] decode picture... /usr/share/enigma2/skin_default/picon_default.png
RemovePopup, id = ZapError
allocate channel.. 07d5:0002
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11797500 Pol 0 SR 29500000 INV 2 FEC 3 orbpos 282 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1197 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:F13:7D5:2:11A0000:0:0:0:
allocate demux
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[LogManager] probing folders
[SEC] set static current limiting
child has terminated
pipes closed
0.0.0.0
192.168
child has terminated
pipes closed
[LogManager] found following log's: ['/home/root/logs']
[LogManager] looking in: /home/root/logs
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[SEC] invalidate current switch params
executing opkg --add-dest /media/hdd:/media/hdd --add-dest /:/ update
job Components.Task.Job name=OnlineVersionCheck #tasks=1 completed with [] in None
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x21387a0 running
[eEPGCache] channel 0x21387a0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
RemovePopup, id = ZapError
PATready
use pmtpid 0103 for service_id 0f13
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 090c
allocate demux
decoder state: play, vpid=515, apid=663
DMX_SET_PES_FILTER(0x203) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x297) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x203) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x90c) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
enable teletext subtitle page 088
[eDVBCAService] new service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
sdt update done!
VIDEO_GET_EVENT - ok
REF: 1:0:19:F13:7D5:2:11A0000:0:0:0:
IS STREAM: False
TEST 1: 400
VIDEO_GET_EVENT - ok
REF: 1:0:19:F13:7D5:2:11A0000:0:0:0:
IS STREAM: False
TEST2: 400
VIDEO_GET_EVENT - ok
REF: 1:0:19:F13:7D5:2:11A0000:0:0:0:
IS STREAM: False
TEST2: 400
config port: HDMI
config mode: 1080i
config res: 1080
config pol: i
config rate: 50
current mode: 1080i50
current res: 1080
current pol: i
current rate: 50
video height: 1080
video width: 1920
video pol: p
video rate: 25000
new res: 1080
new pol: p
new rate: 25
config.av.autores: all
config.av.autores_sd: 720p
config.av.autores_deinterlace: False
new mode: 1080p25
CURRENT MODE: 1080i50
NEW MODE: 1080p25
[VideoMode] setMode - port: HDMI, mode: 1080p25
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: scale
[EPGC] start caching events(1383793590)
child has terminated
pipes closed
executing opkg --add-dest /media/hdd:/media/hdd --add-dest /:/ list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
child has terminated
pipes closed
[OnlineVersionCheck] 2 Updates available
send: 'GET /feeds/3.0/status HTTP/1.0\r\nHost: enigma2.world-of-satellite.com\r\nUser-Agent: Python-urllib/1.17\r\n\r\n'
reply: 'HTTP/1.1 200 OK\r\n'
header: Date: Thu, 07 Nov 2013 03:06:34 GMT
header: Server: Apache
header: Last-Modified: Sun, 27 Oct 2013 21:29:34 GMT
header: Accept-Ranges: bytes
header: Content-Length: 1
header: Connection: close
header: Content-Type: text/plain
poll: unhandled POLLERR/HUP/NVAL for fd 60(16)
child has terminated
pipes closed
[NTP]: setting E2 time: 1383793596.37
poll: unhandled POLLERR/HUP/NVAL for fd 56(16)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1383793598)
[EPGC] stop caching events(1383793598)
[EPGC] next update in 60 min
KEY: 393 PVR
KEY: 393 PVR
action -> InfobarActions showMovies
[InfoBar] Failed to load resumepoints:
KEY: 174 EXIT
action -> OkCancelActions cancel
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:F13:7D5:2:11A0000:0:0:0:
disable dvb subtitles
disable teletext subtitles
enable teletext subtitle page 088
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
playing 1:0:19:F13:7D5:2:11A0000:0:0:0:
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:F13:7D5:2:11A0000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 090c
decoder state: play, vpid=515, apid=663
DMX_SET_PES_FILTER(0x203) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x297) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x203) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x90c) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
enable teletext subtitle page 088
[eDVBCAService] new service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:F13:7D5:2:11A0000:0:0:0:
RemovePopup, id = ZapError
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
PATready
use pmtpid 0103 for service_id 0f13
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 090c
decoder state: play, vpid=515, apid=663
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
KEY: 174 EXIT
KEY: 174 EXIT
action -> InfobarShowHideActions hide
KEY: 174 EXIT
KEY: 401 BLUE
KEY: 401 BLUE
action -> InfobarExtensions extensions
KEY: 174 EXIT
action -> WizardActions back
KEY: 174 EXIT
KEY: 139 MENU
action -> InfobarMenuActions mainMenu
KEY: 139 MENU
KEY: 103 UP
KEY: 103 UP
KEY: 352 OK
action -> OkCancelActions ok
KEY: 352 OK
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 352 OK
action -> OkCancelActions ok
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:F13:7D5:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:F13:7D5:2:11A0000:0:0:0:
disable dvb subtitles
disable teletext subtitles
enable teletext subtitle page 088
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
KEY: 352 OK
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]
dvb time sync disabled... so set RTC now to current linux time! 2013/11/07 03:07
set wakeup time to 2013/11/07 08:54
recordTimerWakeupAuto True
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 695, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 607, in runScreenTest
session.nav.shutdown()
File "/usr/lib/enigma2/python/Navigation.py", line 190, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 965, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 762, in saveTimer
IOError: [Errno 28] No space left on device
------------------------------------------------------------
(exit code 5)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>