View Full Version : [CrossEPG-Config] Crossepg hangs on reading titles - help please
As title crossepg hangs when on reading titles at 195kb & after around ten minutes that disappears & it releases the box.
A few details. My box is a VU+ Solo2 running latest vix 775. I have had it around a month & have not a problem with crossepg until the last week. I've had it on auto update every morning a few minutes after an auto bouquet update has completed which saves to the usb stick. All was updating fine, last good update when I looked back was the 28.10 so I only noticed today when I had blank spaces that it hadn't worked since then.
I've so far tried the following without success.
Reflash 775 from usb stick & reinstall backup of my settings & plugins, manual crossepg update..
Download & restore 775 through box & reinstall of my settings & plugins, manual crossepg update.
Telnet into box, init 4 to standby box, ftp to delete epg.dat & crossepg folder from usb, init 3 to reboot box, manual crossepg update.
Change epg save location from /usb back to default /hdd, manual crossepg update.
They all give the same result where it hangs at the same point then takes a while to release box. Also it used to go to the blue openvix wallpaper with a radio station playing audio when doing a manual update but now it just stays on the current channel.
Hope somebody can offer some help as I've spent many hours today trying to sort it but cannot.
Thanks.
http://www.world-of-satellite.com/showthread.php?32794-Problems-with-775-EPG-and-WiFi&p=247670&viewfull=1#post247670
Hi dude
I think a few of us are having the same problem:
http://www.world-of-satellite.com/showthread.php?32855-updated-to-775-tonight-EPG-crashes-at-reading-titles-on-new-CROSSEPG
It seems a bit hit and miss whether the fixes mentioned work. I've just reflashed back to build 770 and all seems well (epg just completed a full update). I think just be patient and wait for andy and the team to sort this out as they inevitably will. Those boys are the dogs!
Thanks very much for the links above. I've managed to get a manual update to work now which was done back on the blue vix wallpaper screen with radio audio.
I downloaded the older image 774 then restored to that. Then reinstalled my settings & plugins. Then did the manual crossepg update.
Success. Hopefully the guys will find the problem with 775.
Thanks again for the quick replies :thumbsup:
Rob van der Does
05-11-13, 03:40
I had a similar issue; it was fixed by de-installing Cross and subsequent installing again..
I had a similar issue; it was fixed by de-installing Cross and subsequent installing again..
Does that make it work on the 775 image?
Rob van der Does
05-11-13, 08:39
For me it did.
For me it did.
Interesting thanks. I might wait until there's another image update before I retry it.
yer you're not the only one mate
I was having this exact same issue myself as described above on my Duo2 with Vix Build 775 when downloading the OpenTV 28.2E EPG and tried unsuccessfully all the steps suggested to rectify it. I was using the XMLTV-Importer as a workaround with the Rytec UK XMLTV which worked fine although was not as accurate as the OpenTV download using CrossEPG.
However, I updated today to Vix Build 776 and CrossEPG downloaded the OpenTV 28.2E EPG successfully for me. The CrossEPG version info show as as version 7.01.
Thanks to all involved in fixing this in the new build.
The Lambton Worm
06-11-13, 23:49
I'm getting the same problem too on my ET9000. I did a clean install of 775 and the problem reared its ugly head. I've since updated to 778 and its still the same.
A couple of things I've noticed are that there's only 1 option for Sky 28.2 instead of the previous two, and when it downloads it doesn't change to the radio channel.
A couple of things I've noticed are that there's only 1 option for Sky 28.2 instead of the previous two, and when it downloads it doesn't change to the radio channel.
Both of those are features and intensional as part of the upgrade to CrossEPG.
Yes, there is no need to switch to radio channel now & 28.2 is all that's needed for Sky UK & IRE.
A few people have mentioned this now but not one debug log has been uploaded.
As none of the team can reproduce this, it's going to be impossible to find the issue without those logs...
The Lambton Worm
07-11-13, 09:11
No logs for this.
I managed to get the epg populated but it took nearly 20 minutes instead of the normal 1-2 minutes.
Rob van der Does
07-11-13, 10:43
No logs for this.
I managed to get the epg populated but it took nearly 20 minutes instead of the normal 1-2 minutes.
And as said above: no log = no fix.
The Lambton Worm
07-11-13, 11:31
And as said above: no log = no fix.
I can't post one if there isn't one created by ViX.
Rob van der Does
07-11-13, 11:38
You can activate debuglogs at any time. If you have debuglogs de-activated, they will indeed not be produced.
The Lambton Worm
07-11-13, 15:14
OK I'll check that tonight when I get in from work (I normally have it switched on). If it isn't on I'll give it a whirl and see what happens.
Rob van der Does
07-11-13, 15:30
Don't forget to reboot the box once debuglogs have been activated (otherwise you still get no log).
The epg problem has been fixed by upgrading to 776 for most of the boxes but not for ET9200. I have a ET9200 and will to get a log of the failure. Does anyone know how to enable the log and the log location please?
I assume it's the one in /var/log/messages?
Thanks
Sent from my GT-I9505 using Tapatalk
Menu -> Setup -> System -> Logs -> Settings -> Enable debug log = yes.
Restart E2 & try to download the EPG.
The debug log will be in /home/root/logs/ by default.
The Lambton Worm
07-11-13, 21:22
This the only log that's there.
30211
Rob van der Does
07-11-13, 21:38
I can't see anything wrong.
Maybe somebody else?
Sorry not been back with more information on the epg but I ended up with another problem of the flash memory filling up that took me tonight to sort out see here (http://www.world-of-satellite.com/showthread.php?32820-crash-trying-to-download-plugins&p=248682#post248682)
I'll give the newer build a try as soon as I get chance as didn't know there was a 776 available now.
Thanks.
i cant get a log either.
im staying away for now, with an old image until this is well and truely nailed, nothing wrong with old EPG method to be honest - taking up too much time
shouldnt u pull 775 until you get a better and more positive response.
how many happy 775+ users are there>???
This the only log that's there.
30211
I can't see anything wrong.
Maybe somebody else?
There seems to be a lot of:
Entry for 28,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 55.000000, siteLongitude = 7.000000, 28.200000 degrees
PolarmountHourAngle=156.848941
RotorCmd = e173
RotorCmd e173, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 0 Freq 11778000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1178 mhz
OURSTATE: tuning
[CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux1
[CrossEPG_Wrapper] -> FRONTEND 0
[SEC] set static current limiting
KEY: 352 OK
set sequence pos 3
[SEC] setVoltage 1
KEY: 352 OK
[SEC] sleep 900ms
[CrossEPG] TUNING
[CrossEPG_Wrapper] <- OK
[CrossEPG_Wrapper] <- OK
[CrossEPG_Wrapper] <- OK
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ee173(?)
[SEC] sleep 1000ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
Which I don't have in my logs...
im having one more go now! before going to bed!!
2 tuners - 1 motor, 1 28.2
i use 13.0e and 28.2 open tv epg
i will update to latest, once 775 finishes installing.
i cant get a log either.
im staying away for now, with an old image until this is well and truely nailed, nothing wrong with old EPG method to be honest - taking up too much time
shouldnt u pull 775 until you get a better and more positive response.
how many happy 775+ users are there>???
I'm a perfectly happy 778 user for one...
And if you can't be bothered to turn on debug logs, why should we pull any build.
So far, we still only have ONE debug log with this issue, not a lot to go on really...
getting log now chief
watch this space
only 1 happy user, tut tut....
ok
tuners setup , channel list installed
updating to 778
no plugins or restores...
rebooting
only 1 happy user, tut tut....
more likely most happy users, only a few with problems... & it's like trying to get blood out of a stone from those users to get the required debug logs...
setting up cross epg, turning on debugging
dont worry help is at hand.
ticked, sky italia, and syk uk open tv options....
on bbc 1, gone to blue button....crossepg downloader...
stuck at reading titles, read 293kb....zzzzzzzzzzzzzzzzzzzzzz
still the same, and its stuck on question time, even more, zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
no need to report every step, one post with debuglog would be a lot handier & easier to follow.
i want to as it may help!
moved on to reading summaries, read 1.55mb....stuck again (then you might begin to feel our pain how long it takes!)
moved on to reading summaries, read 1.55mb....stuck again (then you might begin to feel our pain how long it takes!)
and you might begin to feel our pain in trying to get the debug logs...
and you might begin to feel our pain in trying to get the debug logs...
touche mate :)
still reading summaries - read 1.55 MB
I'm losing the will to help here.
1 post with steps taken to reproduce & debug log or I'm out...
how long are u prepared to wait?
why dont we chat live on the live chat?
why dont we chat live on the live chat?
because we're not on a dating website....
& it doesn't help others who might have this issue.
1 post of steps + debuglog = faster solution.
mate its done, where do i find the log u want, and do i reboot first? will wait for reply
if you actually read the thread before starting all the nonsense posts, you'ld know where to find it...
by default, crash & debuglog files are stored in /home/root/logs/
Again lots of:
Entry for 28,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 51.766998, siteLongitude = 1.100000, 28.200000 degrees
PolarmountHourAngle=150.241967
RotorCmd = e1dd
RotorCmd e1dd, lastRotorCmd e0d2
set rotor timeout to 35 seconds
prepare_sat System 0 Freq 11778000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1178 mhz
OURSTATE: tuning
[CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux1
[CrossEPG_Wrapper] -> FRONTEND 0
[SEC] set static current limiting
[CrossEPG_Wrapper] <- OK
[SEC] setTone 0
[CrossEPG_Wrapper] <- OK
[SEC] sleep 25ms
set sequence pos 4
set sequence pos 5
set sequence pos 3
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ee1dd(?)
[SEC] sleep 1000ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 140
[SEC] sleep 250ms
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 3 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 4 ok
ok > 4 .. goto 3
So might help Andy in tracking down the issue.
Atleast now we finally have TWO debug logs...
If you only set Sky 28.2 to download & have your sat fixed on that position before running the EPG download, does the same issue happen?
i'll try now! (dont forget i have 2 sats = 1 fixed at 28.2 and the motor, which i'll move to 28.2 i'll kick off the scan.
i'll delete existing log, before creating new
Just restarting E2 will create a new log.
I'd just try the fixed at 28.2 first so we can rule out issues one by one.
here u go mate, with motor on 28.2e and unticked 13.0 in crossepg setup
might disable motor now and retry
for info, my motor is on tuner a and fixed dish at 28.2e on tuner b (this is because blind scan doesnt work on tuner b)
might disable motor now and retry
Please do & set tuner config accordingly.
Still a lot of:
Entry for 28,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 51.766998, siteLongitude = 1.100000, 28.200000 degrees
PolarmountHourAngle=150.241967
RotorCmd = e1dd
RotorCmd e1dd, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 0 Freq 11778000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1178 mhz
OURSTATE: tuning
[CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux1
[CrossEPG_Wrapper] -> FRONTEND 0
[SEC] set static current limiting
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 900ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 9
[SEC] invalidate current rotorparams
in that log.
ok doing so, doesnt look good, its stuck on reading titles - read 488kb, i'll wait and upload
2 mins later, still same..
another thing i get is my box hangs on the 3rd timer of the day, is that a known issue with any build?
for info, my motor is on tuner a and fixed dish at 28.2e on tuner b (this is because blind scan doesnt work on tuner b)
This could have been handy info about 20 posts ago...
another thing i get is my box hangs on the 3rd timer of the day, is that a known issue with any build?
What's 'the 3rd timer of the day'?
here u go, this is with tuner a (motor set to NOT CONFIGURED plus a reboot) disabled
No
- well i say no, it just takes 4 EVER!!!!!!!!!!!!! epg does get populated, but takes 25 mins
Sent from my GT-I9300 using Tapatalk
- well i say no, it just takes 4 EVER!!!!!!!!!!!!! epg does get populated, but takes 25 mins
So, it does work, but something in your setup is slowing it down.
How many feeds have you from the fixed 28.2 dish?
Can you enable those only & try again?
Atleast now, we are finally getting some debug logs, thanks.
yes, correct.
i have 2 feeds from sky LNB, one goes to upstairs azbox (when r u going to support them!) and one to tuner b of xtrend. (only because blind scan doesnt work on tuner b which is no good if u have a motor setup)
i did only enable the one tuner on last log, that was with tuner b (sky) configured only.
BREAKTHROUGH - through all this frustration, ive just installed the latest ALLIANCE image, and guess what! SAME THING HAPPENS!!!
GRRR!!! im cursed.
At least its not the image, just crossepg at fault.
Just for comparrison, a debug log of fixed 28.2 dish, 2 feeds, CrossEPG only downloading OpenTV 28.2E.
Working perfectly every time, probably have done 100+ blue button -> Cross EPG Downloader since the recent EPG updates, just to test this issue.
yes, correct.
i have 2 feeds from sky LNB, one goes to upstairs azbox (when r u going to support them!) and one to tuner b of xtrend. (only because blind scan doesnt work on tuner b which is no good if u have a motor setup)
i did only enable the one tuner on last log, that was with tuner b (sky) configured only.
again, why couldn't you have mentioned this 20+ posts ago...
wasting each others time here, thanks for the debug logs, but I'm finally out.
Like I said in my post earlier, the problem seem to only affect my ET9200. I have a VU Solo and VU+ Duo2 that works well after upgrading from 775 to 778. Attached is the log from my ET9200 on 28.2 on a fixed dish.
again, why couldn't you have mentioned this 20+ posts ago...
wasting each others time here, thanks for the debug logs, but I'm finally out.
a) you didnt ask
b) i dont see why its THAT relevant
c) if we were wasting each others time, you wouldnt have find the VERY useful information i have taken time out to give you
d) you now have some logs to go on that you was so badly seeking.
i think thats time very well spent judge arrogance.
Just for comparrison, a debug log of fixed 28.2 dish, 2 feeds, CrossEPG only downloading OpenTV 28.2E.
Working perfectly every time, probably have done 100+ blue button -> Cross EPG Downloader since the recent EPG updates, just to test this issue.
And are you using Xtrend box? Seems to an Xtrend box issue. My Technomate, Solo and duo2 works fine after upgrading to 778. They weren't working on 775 though.
Sent from my GT-I9505 using Tapatalk
No
- well i say no, it just takes 4 EVER!!!!!!!!!!!!! epg does get populated, but takes 25 mins
Sent from my GT-I9300 using Tapatalk
Are you sure it is not being populated from your old epg data? Did you delete the old epg data before downloading?
Sent from my GT-I9505 using Tapatalk
yes im inclined to agree, theres vu+ people happy with it
its either my tuner setup (fixed on b) and motor on a - or something xtrend 9200 specific stuff going on.
as i said, happens on Xtrend Alliance also which also has crossepg 0.7
a) you didnt ask
When reporting any issue, it's taken that all relevant info will be given. Nobody can guess your configs.
b) i dont see why its THAT relevant
Tuner set-up & configs, not relevant when reporting issues? beyond me, sorry.
c) if we were wasting each others time, you wouldnt have find the VERY useful information i have taken time out to give you
Not a complete waste, atleast we now finally have some debug logs, just a waste of my time by not knowing relevant configs earlier.
d) you now have some logs to go on that you was so badly seeking.
i think thats time very well spent judge arrogance.
Yes, we do, thank you & please forgive the arrogance of you not posting basic details earlier.
And are you using Xtrend box? Seems to an Xtrend box issue. My Technomate, Solo and duo2 works fine after upgrading to 778. They weren't working on 775 though.
Sent from my GT-I9505 using Tapatalk
EXT400, TMTwin, TM2T, GBQuad, VU Solo2 all working fine.
EXT400, TMTwin, TM2T, GBQuad, VU Solo2 all working fine.
I think the problem is with ET9200 then. My Technomate, duo2 and solo works great as well.
I just hope it can be fixed as not every box has this issue
Sent from my GT-I9505 using Tapatalk
yes im inclined to agree, theres vu+ people happy with it
its either my tuner setup (fixed on b) and motor on a - or something xtrend 9200 specific stuff going on.
as i said, happens on Xtrend Alliance also which also has crossepg 0.7
Looks like Xtrend stuff from all indication...I don't think it has to do with your setup
Sent from my GT-I9505 using Tapatalk
Yer cheers. Maybe not many people with same tuner configuration I guess if someone else can plug their 28.2e connection into tuner b and test that might help
Sent from my GT-I9300 using Tapatalk
Yer cheers. Maybe not many people with same tuner configuration I guess if someone else can plug their 28.2e connection into tuner b and test that might help
Sent from my GT-I9300 using Tapatalk
I have two cables from 28.2 with one connected to tuner b and the other connected to tuner a and I still experience the same issue.
Sent from my GT-I9505 using Tapatalk
I'll make sure my crash logs are enabled tonight in case of further problems. Is there any personal information in them that should be deleted before posting them on the forum?
Thanks.
Rob van der Does
08-11-13, 10:26
I've setup my 9200 to download Open-TV on Sky-UK & IT.
I have only tuner A enabled, with a fixed LNB for 28.2E and a motor for 13E.
The process is rather slow: reading titles and descriptions take a considerable amount of time. So I think this confirms your report.
The import started on 28.2E: that took some 8 minutes to complete.
The subsequent 13.E import took another 9 minutes.
The complete import & parsing process took around 18 minutes.
Once done I had no EPG data available on any UK and IT service.
So I can confirm that there is something not quite right.
I've setup my 9200 to download Open-TV on Sky-UK & IT.
I have only tuner A enabled, with a fixed LNB for 28.2E and a motor for 13E.
The process is rather slow: reading titles and descriptions take a considerable amount of time. So I think this confirms your report.
The import started on 28.2E: that took some 8 minutes to complete.
The subsequent 13.E import took another 9 minutes.
The complete import & parsing process took around 18 minutes.
Once done I had no EPG data available on any UK and IT service.
So I can confirm that there is something not quite right.
Something is definitely wrong with 9200 epg
Sent from my GT-I9505 using Tapatalk
What's the best avenue to make this issue known to the dev team?
Sent from my GT-I9505 using Tapatalk
Rob van der Does
08-11-13, 10:56
What's the best avenue to make this issue known to the dev team?
I did.
But given the fact that you noticed the same behaviour using other images, and that my other boxes are fine in this respect, I doubt if we can do anything about it.
It looks like a driver related issue (as it is box-dependant), but I'm not sure what the role of the drivers is in this case.
I did.
But given the fact that you noticed the same behaviour using other images, and that my other boxes are fine in this respect, I doubt if we can do anything about it.
It looks like a driver related issue (as it is box-dependant), but I'm not sure what the role of the drivers is in this case.
I completely agree with you but considering the fact that other boxes experienced the same issue on 775, there might be a way forward....touch wood
Sent from my GT-I9505 using Tapatalk
Maybe your usals location
Sent from my GT-I9300 using Tapatalk
Don't think so. Other boxes on the same settings and same dish works without any issue. And ET9200 was also working fine before the 775 image
Below is some logs:
Woking EPG Download:
08/11/2013 10:25:34 SIFTeam CrossEPG Downloader 0.7.01 (c) 2009-2012 Sandro Cavazzoni (https://github.com/oe-alliance/e2openplugin-CrossEPG)
08/11/2013 10:25:34 This software is distributed under the terms of the GNU Lesser General Public License v2.1
08/11/2013 10:25:34 Interactive: OPEN cmd received
08/11/2013 10:25:34 EPGDB opened (root=/media/usb/crossepg)
08/11/2013 10:25:35 Clearing old aliases...
08/11/2013 10:25:35 Loaded 0 aliases
08/11/2013 10:25:35 Adding new aliases...
08/11/2013 10:25:35 Completed
08/11/2013 10:25:35 Interactive: OK action sent
08/11/2013 10:25:35 Interactive: DEMUXER cmd received
08/11/2013 10:25:35 Interactive: OK action sent
08/11/2013 10:25:35 Interactive: FRONTEND cmd received
08/11/2013 10:25:35 Interactive: OK action sent
08/11/2013 10:25:35 Interactive: DOWNLOAD cmd received
08/11/2013 10:25:35 Started OpenTV events download
08/11/2013 10:25:35 Reading dictionary '/usr/crossepg/providers/skyuk_astra2_28.2.dict' ...
08/11/2013 10:25:35 Completed. Read 512 values
08/11/2013 10:25:35 Reading channels...
08/11/2013 10:25:45 Read 912 channels
08/11/2013 10:25:45 Reading titles...
08/11/2013 10:25:51 Read 3.59 MB
08/11/2013 10:25:51 Parsing titles...
08/11/2013 10:25:57 Titles parsed
08/11/2013 10:25:57 Reading summaries...
08/11/2013 10:26:07 Read 13.63 MB
08/11/2013 10:26:07 Parsing summaries...
08/11/2013 10:26:20 Summaries parsed
08/11/2013 10:26:20 Ended OpenTV events download
08/11/2013 10:26:20 Interactive: SAVE cmd received
08/11/2013 10:26:24 Interactive: CLOSE cmd received
08/11/2013 10:26:24 EPGDB closed
08/11/2013 10:26:24 Interactive: OK action sent
08/11/2013 10:26:24 Interactive: QUIT cmd received
Not working EPG DOwnload:
08/11/2013 00:40:23 SIFTeam CrossEPG Downloader 0.7.01 (c) 2009-2012 Sandro Cavazzoni (https://github.com/oe-alliance/e2openplugin-CrossEPG)
08/11/2013 00:40:23 This software is distributed under the terms of the GNU Lesser General Public License v2.1
08/11/2013 00:40:23 Interactive: OPEN cmd received
08/11/2013 00:40:23 EPGDB opened (root=/media/usb/crossepg)
08/11/2013 00:40:24 Clearing old aliases...
08/11/2013 00:40:24 Loaded 0 aliases
08/11/2013 00:40:24 Adding new aliases...
08/11/2013 00:40:24 Completed
08/11/2013 00:40:24 Interactive: OK action sent
08/11/2013 00:40:24 Interactive: DEMUXER cmd received
08/11/2013 00:40:24 Interactive: OK action sent
08/11/2013 00:40:24 Interactive: FRONTEND cmd received
08/11/2013 00:40:24 Interactive: OK action sent
08/11/2013 00:40:24 Interactive: DOWNLOAD cmd received
08/11/2013 00:40:24 Started OpenTV events download
08/11/2013 00:40:24 Reading dictionary '/usr/crossepg/providers/skyuk_astra2_28.2.dict' ...
08/11/2013 00:40:24 Completed. Read 512 values
08/11/2013 00:40:24 Reading channels...
08/11/2013 00:40:34 Read 912 channels
08/11/2013 00:40:34 Reading titles...
08/11/2013 00:43:51 Maximum loop exceded
08/11/2013 00:43:51 Read 510 KB
08/11/2013 00:43:51 Parsing titles...
08/11/2013 00:43:51 Titles parsed
08/11/2013 00:43:51 Reading summaries...
08/11/2013 00:49:25 Maximum loop exceded
08/11/2013 00:49:25 Read 1.90 MB
08/11/2013 00:49:25 Parsing summaries...
08/11/2013 00:49:27 Summaries parsed
08/11/2013 00:49:27 Ended OpenTV events download
08/11/2013 00:49:27 Interactive: SAVE cmd received
08/11/2013 00:49:29 Interactive: CLOSE cmd received
08/11/2013 00:49:29 EPGDB closed
08/11/2013 00:49:29 Interactive: OK action sent
08/11/2013 00:49:29 Interactive: QUIT cmd received
08/11/2013 04:00:04 SIFTeam CrossEPG Downloader 0.7.01 (c) 2009-2012 Sandro Cavazzoni (https://github.com/oe-alliance/e2openplugin-CrossEPG)
08/11/2013 04:00:04 This software is distributed under the terms of the GNU Lesser General Public License v2.1
08/11/2013 04:00:04 Interactive: OPEN cmd received
08/11/2013 04:00:04 EPGDB opened (root=/media/usb/crossepg)
08/11/2013 04:00:05 Clearing old aliases...
08/11/2013 04:00:05 Loaded 0 aliases
08/11/2013 04:00:05 Adding new aliases...
08/11/2013 04:00:05 Completed
08/11/2013 04:00:05 Interactive: OK action sent
08/11/2013 04:00:05 Interactive: DEMUXER cmd received
08/11/2013 04:00:05 Interactive: OK action sent
08/11/2013 04:00:05 Interactive: FRONTEND cmd received
08/11/2013 04:00:05 Interactive: OK action sent
08/11/2013 04:00:05 Interactive: DOWNLOAD cmd received
08/11/2013 04:00:05 Started OpenTV events download
08/11/2013 04:00:05 Reading dictionary '/usr/crossepg/providers/skyuk_astra2_28.2.dict' ...
08/11/2013 04:00:05 Completed. Read 512 values
08/11/2013 04:00:05 Reading channels...
08/11/2013 04:00:15 Read 912 channels
08/11/2013 04:00:15 Reading titles...
08/11/2013 04:03:32 Maximum loop exceded
08/11/2013 04:03:32 Read 510 KB
08/11/2013 04:03:32 Parsing titles...
08/11/2013 04:03:32 Titles parsed
08/11/2013 04:03:32 Reading summaries...
08/11/2013 04:09:06 Maximum loop exceded
08/11/2013 04:09:06 Read 1.90 MB
08/11/2013 04:09:06 Parsing summaries...
08/11/2013 04:09:08 Summaries parsed
08/11/2013 04:09:08 Ended OpenTV events download
08/11/2013 04:09:08 Interactive: SAVE cmd received
08/11/2013 04:09:10 Interactive: CLOSE cmd received
08/11/2013 04:09:10 EPGDB closed
08/11/2013 04:09:10 Interactive: OK action sent
08/11/2013 04:09:10 Interactive: QUIT cmd received
Ok, this is what I did to resolve the issue.
Removed the default 0.7.1 that came with the image and install the 0.6.2 instead. It now works superb.
See new EPG log below:
08/11/2013 13:53:19 SIFTeam CrossEPG Downloader 0.6.2) (c) 2009-2011 Sandro Cavazzoni (http://code.google.com/p/crossepg/)
08/11/2013 13:53:19 This software is distributed under the terms of the GNU Lesser General Public License v2.1
08/11/2013 13:53:20 Interactive: OPEN cmd received
08/11/2013 13:53:20 EPGDB opened (root=/media/usb//crossepg)
08/11/2013 13:53:21 Clearing old aliases...
08/11/2013 13:53:21 Loaded 0 aliases
08/11/2013 13:53:21 Adding new aliases...
08/11/2013 13:53:21 Completed
08/11/2013 13:53:21 Interactive: OK action sent
08/11/2013 13:53:21 Interactive: WAIT cmd received
08/11/2013 13:53:21 Interactive: DOWNLOAD cmd received
08/11/2013 13:53:21 Started OpenTV events download
08/11/2013 13:53:21 Reading dictionary '/usr/crossepg/providers/skyuk_astra2_28.2.dict' ...
08/11/2013 13:53:21 Completed. Read 512 values
08/11/2013 13:53:21 Reading channels...
08/11/2013 13:53:31 Read 912 channels
08/11/2013 13:53:31 Reading titles...
08/11/2013 13:53:37 Read 3.60 MB
08/11/2013 13:53:37 Parsing titles...
08/11/2013 13:53:41 Titles parsed
08/11/2013 13:53:41 Reading summaries...
08/11/2013 13:53:51 Read 13.68 MB
08/11/2013 13:53:51 Parsing summaries...
08/11/2013 13:54:03 Summaries parsed
08/11/2013 13:54:03 Ended OpenTV events download
08/11/2013 13:54:03 Interactive: SAVE cmd received
08/11/2013 13:54:07 Interactive: CLOSE cmd received
08/11/2013 13:54:07 EPGDB closed
08/11/2013 13:54:07 Interactive: OK action sent
08/11/2013 13:54:07 Interactive: QUIT cmd received
But does that use the spare tuner? Surely thats just the old crossepg. Thanks tho
Sent from my GT-I9300 using Tapatalk
It doesn't use the spare tuner but I am happy with it as it takes less than 2 minutes to complete as against the 0.7.1 that takes forever and never gets the epg populated. I will stay with this old version until the issue is resolved.
The latest version that tend to uses the spare tuner is of no use if you only have a single tuner box though as I found out on my TM single....it just freezes the channel when downloading epg data.
yeah, i didnt think of that mate - im on an old image for now, seems fine.
updates are a pain in the arse unless something groundbreaking is released.
any update on this issue? clearly not an image issue, more of a crossepg 0.7 issue on xtrend 9200's - has it been passed to the crossepg devs?
Ok, this is what I did to resolve the issue.
Removed the default 0.7.1 that came with the image and install the 0.6.2 instead. It now works superb.
See new EPG log below:
08/11/2013 13:53:19 SIFTeam CrossEPG Downloader 0.6.2) (c) 2009-2011 Sandro Cavazzoni (http://code.google.com/p/crossepg/)
08/11/2013 13:53:19 This software is distributed under the terms of the GNU Lesser General Public License v2.1
08/11/2013 13:53:20 Interactive: OPEN cmd received
08/11/2013 13:53:20 EPGDB opened (root=/media/usb//crossepg)
08/11/2013 13:53:21 Clearing old aliases...
08/11/2013 13:53:21 Loaded 0 aliases
08/11/2013 13:53:21 Adding new aliases...
08/11/2013 13:53:21 Completed
08/11/2013 13:53:21 Interactive: OK action sent
08/11/2013 13:53:21 Interactive: WAIT cmd received
08/11/2013 13:53:21 Interactive: DOWNLOAD cmd received
08/11/2013 13:53:21 Started OpenTV events download
08/11/2013 13:53:21 Reading dictionary '/usr/crossepg/providers/skyuk_astra2_28.2.dict' ...
08/11/2013 13:53:21 Completed. Read 512 values
08/11/2013 13:53:21 Reading channels...
08/11/2013 13:53:31 Read 912 channels
08/11/2013 13:53:31 Reading titles...
08/11/2013 13:53:37 Read 3.60 MB
08/11/2013 13:53:37 Parsing titles...
08/11/2013 13:53:41 Titles parsed
08/11/2013 13:53:41 Reading summaries...
08/11/2013 13:53:51 Read 13.68 MB
08/11/2013 13:53:51 Parsing summaries...
08/11/2013 13:54:03 Summaries parsed
08/11/2013 13:54:03 Ended OpenTV events download
08/11/2013 13:54:03 Interactive: SAVE cmd received
08/11/2013 13:54:07 Interactive: CLOSE cmd received
08/11/2013 13:54:07 EPGDB closed
08/11/2013 13:54:07 Interactive: OK action sent
08/11/2013 13:54:07 Interactive: QUIT cmd received
yes but that does not solve the problem with whats going on with the ET receivers and the newer builds of CrossEPG as all you did was downgrade to a older version of CrossEPG.
As rob says it's beginning to look like this may be driver related for the Extrends which is why no one else can replicate it on any other boxes. For the record it works perfectly on all of my receivers in build 778 as it did in 775 with the boxes below.
Vu+ Solo2
Vu+ Uno
Vu+ Duo LE
Vu+ Ulitmo
TM-Nano-OE
TM-Twin-OE
TM-2T-OE
and no i dont have any Extrend receivers to check with.
Also while i'm here let me just reiterate what my colleagues have already said.
When submitting Bug reports and Debug logs it is vital that you give us as much data as possible about your setup, even if you think it's not important. There are so many variables to each individual setup that it is practically impossible for us to work towards replicating your bug reports, Threads like this one need have been less than two pages rather than the nine were in now and it would be a lot less stressful for all involved.
We really appreciate you taking the time to submit logs and bug reports but it has to be done properly to be of any real use to us.
yes, correct.
i have 2 feeds from sky LNB, one goes to upstairs azbox (when r u going to support them!).
There are no plans to offer ViX support for this receiver although i believe other OE-Alliance teams do.
Thanks. So is the action on vix guys or the crossepg guys
Sent from my GT-I9300 using Tapatalk
Thanks. So is the action on vix guys or the crossepg guys
Sent from my GT-I9300 using Tapatalk
There are no CrossEPG guys, CrossEPG has not been updated by it's author for a long long time, infact it has been abandoned all together. Andy is updating CrossEPG for the OE-Alliance him self and it's a ongoing work in progress but we need people to submit accurate and detailed reports when they find faults so that we can at least try to replicate and at best fix those issues.
To be honest, I have always found this package a pain, so I use XMLTV which has always worked for me without the need to recreate corrupted DB's every so often. :) ... and works perfectly on both ET boxes (ET9200/ET5000)
To be honest, I have always found this package a pain, so I use XMLTV which has always worked for me without the need to recreate corrupted DB's every so often. :) ... and works perfectly on both ET boxes (ET9200/ET5000)
as has CrossEPG for me, I have it running on a Ultimo that has been in constant use since the day i got it and CrossEPG / OpenTV has never once failed me, believe me if it had i would have had it in the neck because this is the primary family receiver.
does it work with xmltv then on latest image? if so, i'll just use that instead of opentv
Does ran crossepg on quad. Works perfectm is the radio channel now gone. great work if so.:p
does it work with xmltv then on latest image? if so, i'll just use that instead of opentv
edit, it does work - im actually now going to use XEPGDB - as it supports lots of providers, so no big deal
now on latest image!
im using opentv on both ET500 & 9200 it works but takes ages to complete! and i only seem to get 1 day of data fro monday, only started on the last few builds.
reading titels frezzing at 488kb the 5-15 mins it frezzes again
reading summaries read 1.84 MB
Exactly th same problems on my xp1000
Working properly on my solo2
use xepgdb then works great
I scheduled cross epg to run at 18.30 and it crashes everytime. I have removed crossepg and reloaded but no joy. Can someone take a look at logs .
Thanks.
Debug logs for my XP100 Attached
I had a similar issue; it was fixed by de-installing Cross and subsequent installing again..
same with me
lol thats not really fixing it, but its a working around
Rob van der Does
10-11-13, 06:06
As it looks like to fix the issue, it's not a work-around (it's a one-time job only to fix it; a work-around should be applied every time).
I removed and re added but it still crashes when I set it schedule at a time . I have attached logs in previous post. Is it just me or do I need to reflash again
As it looks like to fix the issue, it's not a work-around (it's a one-time job only to fix it; a work-around should be applied every time).
thats a matter of opinion - working in IT professionally, we apply lots of workarounds, when we have to wait for vendors to fix something. We apply group policy work arounds or registry changes on the affected pc's.
i simply meant, reinstalling an OLD version of CrossEPG is not fixing the issue, its working around it until the new method of CrossEPG obtaining the data using the spare tuner is fixed.
simples.
Rob van der Does
10-11-13, 10:22
i simply meant, reinstalling an OLD version of CrossEPG is not fixing the issue,
Indeed. And you can't, as old versions are not even available.
thats a matter of opinion - working in IT professionally, we apply lots of workarounds, when we have to wait for vendors to fix something. We apply group policy work arounds or registry changes on the affected pc's.
i simply meant, reinstalling an OLD version of CrossEPG is not fixing the issue, its working around it until the new method of CrossEPG obtaining the data using the spare tuner is fixed.
simples.
Thats the point Rob did not reinstall a OLD version of CrossEPG, he removed and then reinstalled the same version.
Rob van der Does
10-11-13, 11:11
And before you ask: the feeds always hold the latest versions of all plugins, regardless of the image version you're using.
I updated to latest build and now crossepg doesn't hang on scheduled scan, it doesn't run at all now. But it works fine manually. Is it me or is this a known issue.
Thanks
I updated to latest build and now crossepg doesn't hang on scheduled scan, it doesn't run at all now. But it works fine manually. Is it me or is this a known issue.
Thanks
it's working fine on my receivers both manually and on scheduled update. if possible could you create a log a scheduled EPG update and post that log here ?.
No problem phonoix, I posted the crash logs a few posts ago. How do I log the scheduled epg update, or will I just try a fresh flash.
set a schedule for say 10:40 and make sure debugging is activated then reboot the receiver at say 10 35 and just wait for the schedule to kick in, the newest log generated will be the one to contain the EPG schedule.
thanks phoenoix removed crosspeg and added it again and it worked. Thanks for all the help
thanks phoenoix removed crosspeg and added it again and it worked. Thanks for all the help
Thanks for letting us know, should help others with the same problem.
Thanks for letting us know, should help others with the same problem.
Worked for me also. Had the same problem with epg download hanging at reading titles
Sent from my GT-I9300 using Tapatalk 2
Does uninstall / reinstalling works for anyone using ET9200?
Sent from my GT-I9505 using Tapatalk
its only opentv that is not working for me :-( so i have not tried reinstalling it.
as ive said 100 times, ditch the open tv option until its fixed. use xepgdb - works a treat and u can be on latest image
Updated to 782 yesterday & manual update now working for me on Solo2. Crossepg was updated in the same update so no separate reinstall was needed for me.
Nice how it works on the channel your watching as well. Haven't tried auto update again yet though. Probably less need for it now as you can do it while your watching tv.
yes, the new one is clever using the spare tuner. BUT is it just me, or does anyones think it would be better if the the graphic wasnt so big and intrusive - it just needs an icon in the top right or something to show its working...i shouldnt grumble as its a great tool.
Maybe the graphic could be smaller, but if it was just "an icon in the top right" we would have users complaining about a random graphic appearing & not knowing what was going on...
Anyway, down to skin developers to see what suits.
as ive said 100 times, ditch the open tv option until its fixed. use xepgdb - works a treat and u can be on latest image
Hi would you mind tellibg me which to select in xepgdb for 28e is it rytec uk xmltv? Do u select bbc one too?
Tks
Sent from my GT-P7500 using Tapatalk
Nah leave bbc one out
Sent from my GT-I9300 using Tapatalk
Thanks manikm actually got cross working just by keeping trying download and eventually worked?!
Sent from my GT-P7500 using Tapatalk
Hello mate I'm having same problem with cross epg,can you tell me the steps of how to de install and reinstall for a novice-many thanks
Rob van der Does
12-11-13, 12:45
Hello mate I'm having same problem with cross epg,can you tell me the steps of how to de install and reinstall for a novice-many thanks
The same as for every plugin:
1- Deinstall: Pluginbrowser --> red. Restart E2 when done.
2- Install: Pluginbrowser --> green. Restart E2 when done.
The Lambton Worm
13-11-13, 13:38
I've upgraded to 785 on my ET9000 and that works.
However, because it uses the free tuner I have another problem. My free tuner (A) is a motorised dish (tuner B fixed on 28e) and if its not on 28e when I update crossepg with OpenTV it moves to 28e. Because it takes time to move from one sat to another crossepg freezes on the first part of scanning channels. Even after tuner A has reached the correct position it doesn't correct itself. If tuner A is already on 28e when I start the download there's no problem what so ever with getting the epg data.
I'll post a log later on when I get home from work.
I've upgraded to 785 on my ET9000 and that works.
However, because it uses the free tuner I have another problem. My free tuner (A) is a motorised dish (tuner B fixed on 28e) and if its not on 28e when I update crossepg with OpenTV it moves to 28e. Because it takes time to move from one sat to another crossepg freezes on the first part of scanning channels. Even after tuner A has reached the correct position it doesn't correct itself. If tuner A is already on 28e when I start the download there's no problem what so ever with getting the epg data.
I'll post a log later on when I get home from work.
thanks adrian, i have added a little delay before trying to download the data from stream. let me know, but it should help with motor setup, will be in tonights build.
https://github.com/oe-alliance/e2openplugin-CrossEPG/commit/8a8a2705c4f28563375f6e9db7521d3894ebf597
Just updataed to 785 open tv working 100% thank you for fixing it :-)
Any news on xp1000 andy. Its still not working
Rob van der Does
14-11-13, 04:28
Any news on xp1000 andy. Its still not working
Yes: update to build 786 please.
xp1000 should be fixed in build 787, building now.
What about the ET9200? has the CrossEPG been fixed the latest update?
I had tried everything to make it work on image 776 without success.
Cheers
Rob van der Does
14-11-13, 13:52
What about the ET9200? has the CrossEPG been fixed the latest update?
I have run Cross on my 9200 on 786: once it goes fine, the other time it doesn't.
We are looking into this, but it seems to be rather random.
I have run Cross on my 9200 on 786: once it goes fine, the other time it doesn't.
We are looking into this, but it seems to be rather random.
Could it be something to do with the EPG versions? I removed the 0.7.02 and installed 0.6.2 and epg download works fine. But not on the latest epg version even after replacing 0.6.2 with 0.7.02.
ISeeFridges
14-11-13, 14:28
xp1000 should be fixed in build 787, building now.
This is working correctly now thank you.
The Lambton Worm
15-11-13, 08:46
thanks adrian, i have added a little delay before trying to download the data from stream. let me know, but it should help with motor setup, will be in tonights build.
https://github.com/oe-alliance/e2openplugin-CrossEPG/commit/8a8a2705c4f28563375f6e9db7521d3894ebf597
Works a treat Andy. Cheers.
I had this issue. while setting up a box for a mate. I tried most of the above without success. re-flashing removing deleteing the plugin, etc, etc,
However, manually scanning 11778V SR-27500 FEC-2/3, manually, it's worked fine since!
This doesn't seem to be on the transponder list so you may have to do it manually if it's not on your satellites.xml. Maybe auto bouquets does not add "IEPG data 1" or "Epg background audio". channels to the list, maybe these are necessary for the EPG update.
maybe this is why it works for some and not others.
balls cannot update with an Edit.
I restored my settings, did the same again, the results are yes the EPG does update on EPG background audio, but if your elsewhere first it fails in the same way.
A work around would be to set it to set a zap to EPG background audio first.
It seem to work fine if i upgrade from 774 in the menu, if i restore my settings from then on 806 it breaks it and i can only update from "EPG background audio" again.
I'd love to be able to log what's happening on various builds but I haven't got time and it's not my box.
abu baniaz
18-12-13, 14:07
Which receiver?
VU+ Duo . the online update worked and kept my working settings, clean flash of 802 couldn't get that to work by itself. without going to epg background audio.
if you restore your 774 or earlier settings you'll break it again, seems if you have the old open tv provider list with 2 sky uk's on there after 774 you definitely need to completely clean up cross epg and start from scratch.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.