View Full Version : [VU+ Duo] Problems with 775 : EPG and WiFi
Hi,
I just did a reflash to 775 and I had some problems, first my WiFi key doesn't work anymore (but this can be a problem with the key), but, more important EPG is doing something strange.
I have seen that there was some changes so I 'll try to be specific.
I have only one OpenTV loading (SKY IT) and the only other EPG I load is SRG (swiss).
First time I tried I was watching a SRG channel and EPG started, did the usual thing but without any "counting" and without freezing the picture as before (as for new EPG...) it was quite fast, too fast in fact as the EPG for SKY was empty.
I retried on a SKY channel (but at the moment without the card) and it did the Channel counting up to the usual 850 or so, then started "reading titles" and stopped at 195Kb after quite a while I killed the process. I tried it several times and the result were the same: on SRG finishes with no data on SKY stops at 195Kb.
Should I try something alse?
Thanks
G
abu baniaz
02-11-13, 17:57
For Wifi, you have to temporarily connect using ethernet cable and then download drivers. Wifi drivers are no longer included by default.
Give the epg some more time.
For Wifi, you have to temporarily connect using ethernet cable and then download drivers. Wifi drivers are no longer included by default.
Ok, I haven't noticed any mention of this. I'll try and see if I can find it.
Give the epg some more time.
You mean more time to EPG to see if it gets to the end of download, or wait for the next update?
Thanks,
G
Hi, I was having the same problem with Build 774 today where the epg update stops at 195KB, if it helps anyone, I deleted the epg.dat off my usb and re downloaded using Cross EPG downloader, worked first time then and all epg is back. :)
abu baniaz
02-11-13, 19:09
More time to complete.
I'm guessing that we are now seeing what it used to do in the background after it had zapped back to the channel we were on.. Assumption is that it is taking longer when this may not be the case.
Well,
I tried e few things: deleting epg data, trying again on and off the SKY channel, waiting, but it was always the same: either no data or stuck on 195Kb. So I got back to 747 and everything works again...
About the WiFi: how do I find which driver I have to download? Alternatively, which one was the one included in the old version(that one was the right one for me)? Next time I'd like to be prepared.
Thanks for the help.
G
abu baniaz
02-11-13, 23:53
Can you say which wifi receiver you have, better still, what chipset it has?
Can you say which wifi receiver you have, better still, what chipset it has?
Well, that is the problem - if I knew that I'd know what to download...
It is KRAUN KR XC , and of course nowhere it says what the chipset is. But I remember that when I first got the DUO only one chipset was supported and I got the right one (at the third attempt....) so if anyone knows what chipset that was, i can get that.
G
Well,
I tried e few things: deleting epg data, trying again on and off the SKY channel, waiting, but it was always the same: either no data or stuck on 195Kb. So I got back to 747 and everything works again...
G
Providing debug logs of when you try to do an EPG download as well as providing as much info as possible is the only thing that can help here...
Tuner setup, EPG save location, debug logs...
abu baniaz
03-11-13, 00:28
Plug it into a PC and explore the details, it should say what drivers it is using.
Hi have the same issue with CrossEPG where it is "stuck" on "Read Titles 195KB.
Here is a sequence of events:
1) Stopped enigma2
2) Deleted epg.dat & crossepg folder & all logs
3) Restarted enigma2
4) Performed CrossEPG download
5) Waited a century
6) Checked the quick guide and the EPG is full of gobbledygook
Logs and screenshot attached :-)
300453004630047
Hi have the same issue with CrossEPG where it is "stuck" on "Read Titles 195KB.
Here is a sequence of events:
1) Stopped enigma2
2) Deleted epg.dat & crossepg folder & all logs
3) Restarted enigma2
4) Performed CrossEPG download
5) Waited a century
6) Checked the quick guide and the EPG is full of gobbledygook
Logs and screenshot attached :-)
300453004630047
sorry, but that version i not the NEW version.
here is extract from my log.
[CrossEPG_Wrapper] <- READY[CrossEPG_Wrapper] -> OPEN
[CrossEPG_Downloader] Search NIM for orbital position 282
opening frontend 3
[CrossEPG_Downloader] Nim found on slot id 3 with sat 28.2E Eutelsat 28A & Astra 1N/2A/2F
allocate demux
(3)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11778000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1178 mhz
OURSTATE: tuning
[CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux1
[CrossEPG_Wrapper] -> FRONTEND 3
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[CrossEPG] TUNING
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[CrossEPG_Wrapper] <- OK
[CrossEPG_Wrapper] <- OK
[CrossEPG_Wrapper] <- OK
[SEC] sleep 150ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] sendDiseqc: e01038f1(?)
[CrossEPG] TUNING
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 3
(3)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
[CrossEPG] TUNING
(3)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[CrossEPG] ACQUIRING TSID/ONID
[CrossEPG_Wrapper] -> DOWNLOAD skyuk_astra2_28.2
[CrossEPG_Wrapper] <- START
[CrossEPG_Wrapper] <- TYPE READ CHANNELS
[SEC] set dynamic current limiting
[CrossEPG_Wrapper] <- TYPE READ TITLES
[CrossEPG_Wrapper] <- TYPE PARSE TITLES
[CrossEPG_Wrapper] <- TYPE READ SUMMARIES
[CrossEPG_Wrapper] <- TYPE PARSE SUMMARIES
[CrossEPG_Wrapper] <- END
notice the TUNING and ACQUIRING TSID/ONID. think you need to reflash.
HI,
same problem here with an et9000: with a fresh 775 install, I have the same crossepg problem, if I downgrade to 774, it works like a charm ...
I have just performed a fresh flash but DID NOT restore any settings/plugins. This has resolved the issue for me so I suggest you try the same :-)
OMG same problem!!
fresh image, all EPG removed - no settings \ plugins restored.
STUCK at reading titles READ 195kb !!
seriously - surely no one can have done this upgrade without issues.
im going back to October image.
vexing.
im going back to October image.
vexing.
No point in vexing, debug logs would be a lot more useful.
surely that was the beta testers job
ive reflashed now to a working image
heres my crossepg log when it was screwed - have open tv 28.2 and Italy 13.0 ticked
04/11/2013 20:00:18 SIFTeam CrossEPG Downloader 0.7.0+git366+89b5751 (c) 2009-2012 Sandro Cavazzoni (https://github.com/oe-alliance/e2openplugin-CrossEPG)
04/11/2013 20:00:18 This software is distributed under the terms of the GNU Lesser General Public License v2.1
04/11/2013 20:00:18 Interactive: OPEN cmd received
04/11/2013 20:00:18 EPGDB opened (root=/media/hdd/crossepg)
04/11/2013 20:00:18 Clearing old aliases...
04/11/2013 20:00:18 Loaded 0 aliases
04/11/2013 20:00:18 Adding new aliases...
04/11/2013 20:00:18 Completed
04/11/2013 20:00:18 Interactive: OK action sent
04/11/2013 20:00:18 Interactive: DEMUXER cmd received
04/11/2013 20:00:18 Interactive: OK action sent
04/11/2013 20:00:18 Interactive: FRONTEND cmd received
04/11/2013 20:00:18 Interactive: OK action sent
04/11/2013 20:00:30 Interactive: DOWNLOAD cmd received
04/11/2013 20:00:30 Started OpenTV events download
04/11/2013 20:00:30 Reading dictionary '/usr/crossepg/providers/skyit_hotbird_13.0.dict' ...
04/11/2013 20:00:30 Completed. Read 510 values
04/11/2013 20:00:30 Reading channels...
04/11/2013 20:00:40 Read 845 channels
04/11/2013 20:00:40 Reading titles...
04/11/2013 20:04:18 Maximum loop exceded
04/11/2013 20:04:18 Read 235 KB
04/11/2013 20:04:18 Parsing titles...
04/11/2013 20:04:19 Titles parsed
04/11/2013 20:04:19 Reading summaries...
04/11/2013 20:10:58 Interactive: QUIT cmd received
04/11/2013 20:11:06 Read 965 KB
04/11/2013 20:11:06 Ended OpenTV events download
ive just found more crossepg info in /usr/crossepg - should i delete that and retry? i thought it was all in /hdd/crossepg
EDIT - doh, this is SINCE reflashing with one of my own images. Ignore.
OMG same problem!!
fresh image, all EPG removed - no settings \ plugins restored.
STUCK at reading titles READ 195kb !!
Did you also delete the crossepg folder?
Did you also delete the crossepg folder?
yes! from /hdd/crossepg
Do you have an enigma2 log we can see?
surely that was the beta testers job
No, I'd consider it anybodys job if you want to use the image & have issues.
I read somewhere in the forum that upgrading to 776 resolved the issues with CrossEPG.....
You might want to try that as well
i have had the same problem for two days, new usb stick as well to try trouble shooting
stays in 1.83mb for ages and then just stays there and times out
also removed crossepg and reinstalled and now stops at 488kb
im on 782
[CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux1
[CrossEPG_Wrapper] -> FRONTEND 1
set sequence pos 3
[SEC] setVoltage 1
[CrossEPG_Wrapper] <- OK
[SEC] sleep 900ms
[CrossEPG_Wrapper] <- OK
[CrossEPG_Wrapper] <- OK
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ee1f3(?)
[SEC] sleep 1000ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] setFrontend 0
setting frontend 1
[SEC] set timeout 1440
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 3 ok
set sequence pos -3
[SEC] sleep 250ms
[CrossEPG] TUNING
[CrossEPG] TUNING
[SEC] locked step 4 ok
ok > 4 .. goto 3
set sequence pos 3
OURSTATE: ok
[SEC] update current rotorparams 1435 e1f3 282
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
[CrossEPG] ACQUIRING TSID/ONID
[CrossEPG_Wrapper] -> DOWNLOAD skyuk_astra2_28.2
[CrossEPG_Wrapper] <- START
[CrossEPG_Wrapper] <- TYPE READ CHANNELS
[CrossEPG_Wrapper] <- TYPE READ TITLES
2146
2146
[AutoTimer] Auto Poll
[AutoTimer] Auto Poll Started
job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
2146
2146
[CrossEPG_Wrapper] <- TYPE PARSE TITLES
[CrossEPG_Wrapper] <- TYPE READ SUMMARIES
i have had the same problem for two days, new usb stick as well to try trouble shooting
stays in 1.83mb for ages and then just stays there and times out
also removed crossepg and reinstalled and now stops at 488kb
im on 782
[CrossEPG] ACQUIRING TSID/ONID
[CrossEPG_Wrapper] -> DOWNLOAD skyuk_astra2_28.2
[CrossEPG_Wrapper] <- START
[CrossEPG_Wrapper] <- TYPE READ CHANNELS
[CrossEPG_Wrapper] <- TYPE READ TITLES
2146
2146
[AutoTimer] Auto Poll
[AutoTimer] Auto Poll Started
job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
2146
2146
[CrossEPG_Wrapper] <- TYPE PARSE TITLES
[CrossEPG_Wrapper] <- TYPE READ SUMMARIES
seem all is fine, if it slow then do what i said, DO NOT USE USB STICKS there to slow. i keep saying this, use a HDD
seem all is fine, if it slow then do what i said, DO NOT USE USB STICKS there to slow. i keep saying this, use a HDD
andyblac any news on the crossepg 0.7 issue on xtrend 9200:
http://www.world-of-satellite.com/showthread.php?32857-Crossepg-hangs-on-reading-titles-help-please/page10
I have a problem with CrossEPG too.
I upgraded 2 Solo2 boxes in the last week, one is still on 775 , the other is on 786.
Both boxes run CrossEPG and finish, but it seems to run far too quickly than I remember and no surprise, no guide data exists afterwards :-(
I have tried deleting the EPG.dat and Crossepg folder from the HDD and whilst the Crossepg folder get re-populated with the database files, the EPG.dat file does not re-appear.
UPDATE:
Switching from XEPGDB to XMLTV has worked, theres just odd channels missing like ComedyCtrl+1 which I can live with, they may have been missing previously for all I know :)
Andy_Hazza
14-11-13, 12:45
Have you setup a swap file?
Have you setup a swap file?
I hadn't, I've always left the box pretty much configured as it comes, but I have just setup a 256Mb swap using the SwapManager.
no need to setup a swap file on a solo2 it has more than sufficient memory, a swap file will just slow it down.
no need to setup a swap file on a solo2 it has more than sufficient memory, a swap file will just slow it down.
Doh, thanks, should have gone with my gut :)
Andy_Hazza
14-11-13, 16:15
Sorry I thought it was a Duo as thats what it says in the thread?
Well,
I tried again to load the latest VIX update but the result was the same EPGdownloader either was fast but didn't load anything or hangs at 195Kb (and if you wait enough ends with nothing loaded too).
So I tried as suggested above, uninstall CrossEPG and reinstall it, and everything now works perfectly! I have no idea what was the problem or how this fixed it (it wasn't the configuration as it was still there), but I am happy now.
And, as an aside, if you need to reinstall the WIFi driver for a stick that worked with the default Vix before(the other problem I had), you have to install the "R37" driver.
Thanks to all,
G
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.