View Full Version : [VU+ Solo2] Transcoding problem from build 760 onwards
Hi.
I recently flashed to the latest VIX build however I have noticed some changes to the transcoding plugin and functionality. Previously I was able to open a transcoded stream via the OpenwebIF using VLC player. However, now when I try to open the transcoded stream I receive the error:
'Your input can't be opened:
VLC is unable to open the MRL (my DNS address/channel info etc). Check the log for details.'
The standard stream opens without a problem.
I have now done a test and reflashed to build 3.0.750 and it it works again. I currently use port 8002 for the transcoded stream and in the newest VIX build noticed there is 'channel port' and 'media port' setting. Perhaps it has something to do with that? I did mess about with it but VLC just wouldn't play the stream and got the same error as above.
Any ideas?
Thanks.
Channels or Recordings ?, we think it is driver issues, i am in contact with Vu about this issue.
Channels streaming live. I don't think I tried any recordings. Glad you guys are aware of it though.
I have the same issue. I have tried
PC - VLC and get the same error.
Andorid VU+ Player stream does not start when using transcoding.
I know there is a new build so will try if its fixed
This also happens to me (on a Duo2 btw), but only if you have changed the webif port to anything other than 80 (mine is on 8000) Transcoding port is still 8002
Try pressing CTRL+M in VLC to open the log window, then press play again.
I get "HTTP/1.0 502 Bad Gateway". So transcoding only works with webif is set to port 80.. Doesn't matter what port transcoding is set to
tuneboy2005
01-11-13, 08:23
indeed. same issue here since latest VIX (above 760).
Recordings are working but channels don't.
Rob van der Does
01-11-13, 08:26
VU+ has released a fix; please see if this works any better in build 774.
build 774 is not on the vix download. I have also change my webif port from 80 to another port. Will try with default port
Rob van der Does
01-11-13, 14:07
Build 774 is available via online update.
Thanks for the update. I will flash to 774 and report back.
Just wanted to double check some settings. What ports should be used for 'channel port' and 'media port' ? The original plugin only had 'Transcoding port'.
I have ports 8001, 8002 (for transcoding) forwarded and of course the webif port.
30005
What exactly is are the 2 setting highlighted above for?
Thanks!
Just wanted to double check some settings. What ports should be used for 'channel port' and 'media port' ? The original plugin only had 'Transcoding port'.
I have ports 8001, 8002 (for transcoding) forwarded and of course the webif port.
30005
What exactly is are the 2 setting highlighted above for?
Thanks!
one is for streaming tv channels, the other is for streaming recordings etc.
Thanks, just wanted to double check that.
Well I'm still getting the same error on 775. Channel port set to 8002 just as on pre 760 builds.
Anyone else?
Rob van der Does
02-11-13, 05:12
And you did disable the last line in the Open WEB-IF settings plugin?
And you did disable the last line in the Open WEB-IF settings plugin?
I have the same issue with the last line in open WEB-IF set to No
VIX Build 775
Duo2
And you did disable the last line in the Open WEB-IF settings plugin?
Did that just now and it solved the transcoding of recordings. Live channels still don't work.
tuneboy2005
02-11-13, 19:34
Same here, recordings are ok but no live channels after update
So it's not only me having this issue. Guess I'll have to stick to an older build till it's sorted.
I have upgrade to 775 and can confirm transcoding is not working via vlc on pc and andorid device
I still get ""HTTP/1.0 502 Bad Gateway" with build 776, when streaming on port 8002
By the way, there are new VU+ drivers out today.
According to the changelog, transcoding has been improved for Solo2 / Duo2.
I wonder what exactly the improvements are. Or are these just bugfixes thay don't want to mention?
Rob van der Does
06-11-13, 15:10
Please try build 777 when it's available: that will tell you (and us) what has been improved.
I tried 776 this morning and got a crash when selecting the transcoding plugin. I have tried streaming live channels (not transcoded) on port 85 but it does not work. Will try 777 when i get home and test from there and post back if someone doesnt beat me to it.
Rob van der Does
06-11-13, 17:14
Crash should be fixed in 777.
Transcoding still doesn't work in build 777
Transcoding still doesn't work in build 777
What port are you using in openwebif?
Port 8000
And yes, it works if you set the port to 80
Crash should be fixed in 777.
Crash fixed but getting a blank screen 30163
Correction: If webif is set to port 80, i get the regular stream on port 8002, not the transcoded one
If webif port is anything other than 80, i get "HTTP/1.0 502 Bad Gateway"
Correction: If webif is set to port 80, i get the regular stream on port 8002, not the transcoded one
If webif port is anything other than 80, i get "HTTP/1.0 502 Bad Gateway"
ports 80 & 8001 are NOT allowed for transcode, as those are already used. you now HAVE to use port 8002 or higher.
check your firewall, although transcoding is not fully working , vu are still working on this.
I think you read my post wrong :)
Webif port is set to 8000
Transcoding port is set to 8002
But then it doesn't work, i get "bad gateway" when opening stream
If i set the webif to port 80, then i get the regular un-transcoded stream on port 8002
Im using build 778.Web interface 90. Transcoding port set as 8002.All these ports are forwarded as per norm.My problem is i cannot stream live channels to my android device only recorded ones.Why after reflashing to a newer build has this happened :confused:
drivers are in a mess atm over streaming and transcoding.
Well I've not tried the latest version but it still doesn't seem to have fixed transcoding by reading the posts above.
Just wondering what has caused these issues? Was it the new video overhaul present from build 760, or is it down to Vu+ and their drivers? Maybe the old plugin from pre 760 can be used? I don't know all the technical aspects that goes into building an image but I wouldn't mind reading a detailed explanation of the problem and what may be causing it if anyone from VIX can be bothered explaning it. It would be interesting to see but it's your guys call.
Thanks for the update.
Rob van der Does
07-11-13, 15:14
Crash fixed but getting a blank screen 30163
Fixed in build 779.
Thanks for reporting.
Is this fixed for you all? I've got webif on port 8003, transcoding 8002. If I try the first tv icon (on ipad with iOS7) I get message saying "the operation could not be complete", second icon shows "resource unavailable". I'm on the latest build and have tried a few different ports all with same results. Any help would be appreciated!
Have you tried port 80 for webif?
Have you tried port 80 for webif?
is not available for transcoding only 8002 - 9999
is not available for transcoding only 8002 - 9999
Andy, think there's a mis-understanding, I was referring to the web interface port which is by default 80. I have mine currently set to 85 and it doesn't stream over the net.
Andy, think there's a mis-understanding, I was referring to the web interface port which is by default 80. I have mine currently set to 85 and it doesn't stream over the net.
ok, thought you meant transcode port.
I am having the same issue as you guys changed over from openpli to openvix as ondemand plugin works on openvix but. When I transcode on my android device keep getting error I no my setup is fine because I could stream fine on openpli will their be a fix soon? I have also installed the new drivers vuplus-dvb-modules-vusolo2-3.3.8-4.4.3-20131106.tar still no joy.
Rob van der Does
18-11-13, 17:50
I am having the same issue as you guys changed over from openpli to openvix as ondemand plugin works on openvix but. When I transcode on my android device keep getting error I no my setup is fine because I could stream fine on openpli will their be a fix soon? I have also installed the new drivers vuplus-dvb-modules-vusolo2-3.3.8-4.4.3-20131106.tar still no joy.
Please make sure you're running build 790. There's no need to install drivers: they're embedded in the image.
Just checked mate I am on build 790 still cant stream live tv but can stream movies off my harddrive
Just updated to 790 via usb but still same issue.
Same here... On 790...
Recordings fine.
Live TV transcoding - nothing...
Rob did the 790 drivers work when testing transcoding ?
Got the same with transcoding here aswell, I can get live tv (not transcoded) working but not transcoding.
Yes it seems the problem is still present. Recordings can be transcoded but live TV will not work. Running latest VIX build.
Same here guys realley hope this gets fixed miss my tv on the go could not go back to openpli it would feel like one step backwards.
Rob van der Does
19-11-13, 19:07
Results seem to be depending on the device used: PC/Android/Ipod all give different results. so it is important to mention the device used and it's also worth trying different settings.
Not sure if this is related or not but I can't get streaming working on vu player, on vix 790.
Rob van der Does
20-11-13, 05:41
Results seem to be depending on the device used: PC/Android/Ipod all give different results. so it is important to mention the device used and it's also worth trying different settings.
And not only device dependant, but also different results on the application used.
Rob any idea on what devices / apps that work 100%.
Im not having any success with PC (VLC) or android phone or tablet (with any streaming program).
David
And not only device dependant, but also different results on the application used.
Rob van der Does
20-11-13, 08:04
Please make sure that in the Open WEB-IF configuration the last line has been set to 'no'.
Windoes-PC using VLC & MediaPlayerClassis work fine here.
But again: try different settings in the transcoding plugin to see it that makes any difference.
Yes it works with OpenWebif port set to 80, but on any other port, it's still broken.
It seems to me that transtreamproxy opens a connection to Openwebif somehow, and doesn't look at OpenWebif port settings. It just tries to connect to port 80, regardless of what you set OpenWebif port to.
Take a look at line 108 in "streamproxy.c" port seems like it's hardcoded to 80
106 struct sockaddr_in sin;
107 sin.sin_family = AF_INET;
108 sin.sin_port = htons(80);
109 sin.sin_addr.s_addr = inet_addr("127.0.0.1");
110 if (connect(upstream, (struct sockaddr*)&sin, sizeof(struct sockaddr_in)))
111 {
112 reason = "Upstream connect failed.";
113 goto bad_gateway;
114 }
115
116 snprintf(upstream_request, sizeof(upstream_request), "GET /web/stream?StreamService=%s HTTP/1.0\r\n%s%s\r\n", service_ref, xff_header, authorization);
117
118 if (write(upstream, upstream_request, strlen(upstream_request)) != strlen(upstream_request))
119 goto bad_gateway;
The weird thing is, the regular stream on port 8001 works fine, but transcoded on port 8002 does not
I got it working I flashed blackhole and the openvix did not use backup done full install transcodeing fine on andriod 790 updated to 791 via update pannel works very well thanks guys
I got it working I flashed blackhole and the openvix did not use backup done full install transcodeing fine on andriod 790 updated to 791 via update pannel works very well thanks guys
Makes absolutely no sense, can you please repost with readable English for other users with the same issue.
On my duo 2 on build 793, I can get live tv to stream (not transcoded) and also recorded content (transcoded). Trying live tv transcoded on both vlc and mpc hc I get Your input can't be opened:VLC is unable to open the MRL and failed to render file respectively.
Readable english judge ViX Beta Tester Flash your vu solo2 box with blackhole image which is in the download section then flash vu solo2 with openvix-3.0.793-vusolo2_usb.zip
Makes absolutely no sense, can you please repost with readable English for other users with the same issue.
Let me guess I am thick as shit
No blackhole image in vix dl section mate, what you said didn't make sense as blackhole is an image and so is vix.. You either flashed blackhole or you flashed vix, as far as I know you can't flash both at the same time.
Your not think as shit mate, it just didn't read correctly, you know what you meant even if we didn't lol..
Still not working for me.
Just tried changing the webif port back to 80 as someone suggested but it didn't make a difference. I'm certain everything on my side is setup correctly and all necessary ports are forwarded etc. Just to clarify it's only live channels that will not transcode, recordings work.
Vix build 793/Windows/VLC player.
Yep this is still messed up - mine was working perfectly until a few builds ago when these settings were changed. Why does it work on port 80 only? 8003 was working perfectly previously!
Rob van der Does
29-11-13, 15:09
All we know is that any issues there may be are driver related. We supplied all available info to VU+ and they are working on it.
Hope this will be fixed as stil not working on the lastest update
Tried the new vu duo2 drivers out today using VIX 802, Transcoding live TV still not working anyone having any luck transcoding
Rob van der Does
12-12-13, 19:27
Tried the new vu duo2 drivers out today using VIX 802, Transcoding live TV still not working anyone having any luck transcoding
As the changelog says: await a new plugin.
Plugin updated by vu+ now, no doubt be making its way soon into VIX
Rob van der Does
14-12-13, 10:49
Plugin updated by vu+ now, no doubt be making its way soon into VIX
Nope, that's not the case.
We tested the plugin and the latest drivers and transcoding isn't working at all now.
Since VU+ continues to make a complete mess of the transcoding for a year now, we decided to delete that functionality from our images until they bring out a proper fix.
Build 805 has this in now for testing. Tested on my Duo 2
I am unable to get transcoding working via LAN on live tv or recorded content. Tried PC with VLC and Blackbox on Ipad. Tried ports 8002 and 8003 and my webif port is 80.
VLC error is
Your input can't be opened:
VLC is unable to open the MRL
Rob van der Does
14-12-13, 18:49
Yep, can't get it to work on the DUO2 either. On the Solo2 it works (a bit; only when using 1Mbs@25Fps and even then breaking up).
Nice to see the 720p option for transcoding being available (when it eventually works)
The thing i don't understand with VU, This was working fine at one point ?
Rob van der Does
16-12-13, 12:59
No, it never worked in all environments; it should work on a PC, Android & iPod.
And apart from that: VU is in the process of adding more features.
Ok Sorry forgot to mention my set up, So are you saying it should work now on a PC and on my Galaxy S4. In the past i had it working fine on my phone and PC but at the moment i cant seem to get it to work. i am using vuplayer and vlc on the S4 with no joy Thanks
I don't think its working at all at the moment on the duo2, solo2 a bit but not very well.
Rob van der Does
16-12-13, 21:41
As far as I can test transcoding doesn't work at all atm for the DUO2.
You can install the 6/11 drivers: they might do a fairly good job in this area.
Vu player was dreadful yesterday on solo2, so all in the same boat and will have to wait on VU to sort this one.
As far as I can test transcoding doesn't work at all atm for the DUO2.
You can install the 6/11 drivers: they might do a fairly good job in this area.
Thanks Rob will give that a go just seems a shame to install old drivers
As far as I can test transcoding doesn't work at all atm for the DUO2.
You can install the 6/11 drivers: they might do a fairly good job in this area.
Tried the 6/11 drivers still no luck, Maybe the drivers didn't install correctly replaced the 4 files in the driver location and restarted my box
Rob van der Does
17-12-13, 19:55
I was just about to report that in build 806 transcoding for the DUO2 (at least in a PC-environment) works again. It looks like VU+ reverted the advanced options in their 17/12 driver-fix.
SIC any word through the distribution channels as to what VU+ is doing about this.
Its a bit ironic that the VU+ website they blab on about its transcoding features that never worked.
Suppliers and distributors should be putting pressure onto them to sort this...
Its a premium product not a €100 box....
Cant get mine to transcode to a pc using vlc. On Build 806 using port 8002 to transcode and port 80 for openwebif.
Get the following error
main debug: processing request item: http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD, node: Playlist, skip: 0
main debug: resyncing on http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD
main debug: http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD is at 0
main debug: starting playback of the new playlist item
main debug: resyncing on http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD
main debug: http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD is at 0
main debug: creating new input thread
main debug: Creating an input for 'http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD'
main debug: using timeshift granularity of 50 MiB, in path 'C:\Users\Dan\AppData\Local\Temp'
main debug: `http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD' gives access `http' demux `' path `192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD'
main debug: creating demux: access='http' demux='' location='192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD' file='\\192.168.0.2:8002\1:0:19:EDA:7D5:2:11A0000: 0:0:0::401 - Sky Sports 1 HD'
main debug: looking for access_demux module matching "http": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'http' location='192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD', path='\\192.168.0.2:8002\1:0:19:EDA:7D5:2:11A0000: 0:0:0::401 - Sky Sports 1 HD'
main debug: looking for access module matching "http": 20 candidates
access_http debug: querying proxy for http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD
access_http debug: no proxy
access_http debug: http: server='192.168.0.2' port=8002 file='/1:0:19:EDA:7D5:2:11A0000:0:0:0::401+-+Sky+Sports+1+HD'
main debug: net: connecting to 192.168.0.2 port 8002
main debug: connection succeeded (socket = 1392)
qt4 debug: IM: Setting an input
access_http error: failed to read answer
access_http debug: switching to HTTP version 1.0
main debug: net: connecting to 192.168.0.2 port 8002
main debug: connection succeeded (socket = 1492)
access_http error: failed to read answer
main debug: net: connecting to 192.168.0.2 port 8002
main debug: connection succeeded (socket = 1492)
access_mms error: error: HTTP/1.0 400 Bad Request
main debug: no access modules matched
main error: open of `http://192.168.0.2:8002/1:0:19:EDA:7D5:2:11A0000:0:0:0::401 - Sky Sports 1 HD' failed
main debug: dead input
main debug: changing item without a request (current 0/1)
main debug: nothing to play
qt4 debug: IM: Deleting the input
Rob van der Does
17-12-13, 20:58
Yeah, I'm getting a bit confused.
Using the drivers from http://archive.vuplus.com/download/drivers/ it does work. Those drivers should be the same as in build 806, but apparently that's not the case.
Tried with the drivers from the link but no joy, still get same error using vlc on a pc.
Seems to have broken the live streaming aswell.
What a shame this is, I had just recently managed to crack the transcoding on my solo 2 as well.
Going to try a fresh flash with settings restore to see if this helps.
Rob van der Does
18-12-13, 13:20
VU+ really made a mess of the drivers this time.
Hoping they fix it soon.....
Live streaming working again after reflash.
Rob van der Does
19-12-13, 04:53
Live streaming working again after reflash.
Good. I wasn't able to reproduce any issues in that area. Only transcoding is fully f#^&#^d atm.
I haven't touched any of my settings and streaming seems to be working again.
Installed drivers released today by vu+
Can get it to transcode on my ipad with blackbox that wasn't working before at all. However I have noticed that if you stop a transcoding stream and choose another you get no sound. If you close the app down and choose the stream you get sound on the first stream. Choose another and you lose sound. Could of course be a bug with black box. I did try it on istreamgate on my iPhone and get a picture but no sound at all.
However, no luck on my pc with vlc 2.12 or mpc - hc using open webif
VLC error
main debug: adding item `stream.m3u' ( file:///C:/Users/Dan/Desktop/stream.m3u )
qt4 debug: Adding a new MRL to recent ones: file:///C:/Users/Dan/Desktop/stream.m3u
main debug: processing request item: stream.m3u, node: Playlist, skip: 0
main debug: rebuilding array of current - root Playlist
main debug: Creating an input for 'stream.m3u'
main debug: rebuild done - 2 items, index 1
main debug: starting playback of the new playlist item
main debug: resyncing on stream.m3u
main debug: stream.m3u is at 1
main debug: creating new input thread
main debug: Creating an input for 'stream.m3u'
main debug: using timeshift granularity of 50 MiB, in path 'C:\Users\Dan\AppData\Local\Temp'
main debug: `file:///C:/Users/Dan/Desktop/stream.m3u' gives access `file' demux `' path `/C:/Users/Dan/Desktop/stream.m3u'
main debug: creating demux: access='file' demux='' location='/C:/Users/Dan/Desktop/stream.m3u' file='C:\Users\Dan\Desktop\stream.m3u'
main debug: looking for access_demux module matching "file": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'file' location='/C:/Users/Dan/Desktop/stream.m3u', path='C:\Users\Dan\Desktop\stream.m3u'
main debug: looking for access module matching "file": 20 candidates
filesystem debug: opening file `C:\Users\Dan\Desktop\stream.m3u'
main debug: using access module "filesystem"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: looking for stream_filter module matching "any": 6 candidates
main debug: no stream_filter modules matched
main debug: looking for stream_filter module matching "record": 6 candidates
main debug: using stream_filter module "record"
main debug: creating demux: access='file' demux='' location='/C:/Users/Dan/Desktop/stream.m3u' file='C:\Users\Dan\Desktop\stream.m3u'
main debug: looking for demux module matching "m3u": 63 candidates
playlist debug: found valid M3U playlist
main debug: using demux module "playlist"
main debug: looking for a subtitle file in C:\Users\Dan\Desktop\
main debug: looking for meta reader module matching "any": 2 candidates
lua debug: Trying Lua scripts in C:\Users\Dan\AppData\Roaming\vlc\lua\meta\reader
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader\filename.luac
main debug: meta ok for (null), need to fetch art
main debug: looking for meta fetcher module matching "any": 1 candidates
main debug: no meta reader modules matched
main debug: `file:///C:/Users/Dan/Desktop/stream.m3u' successfully opened
main info: stopping playback
main debug: deleting item `stream.m3u'
main debug: EOF reached
lua debug: Trying Lua scripts in C:\Users\Dan\AppData\Roaming\vlc\lua\meta\fetcher
main debug: incoming request - stopping current input
main debug: incoming request - stopping current input
main debug: removing module "playlist"
main debug: finished input
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\fetcher
main debug: removing module "record"
main debug: removing module "filesystem"
main debug: incoming request - stopping current input
main debug: dead input
main debug: meta ok for http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD, need to fetch art
main debug: processing request item: http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD, node: Playlist, skip: 0
main debug: rebuilding array of current - root Playlist
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\fetcher\tvrage.luac
main debug: rebuild done - 2 items, index 1
main debug: starting playback of the new playlist item
main debug: resyncing on http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD
main debug: http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD is at 1
main debug: creating new input thread
main debug: Creating an input for 'http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD'
main debug: using timeshift granularity of 50 MiB, in path 'C:\Users\Dan\AppData\Local\Temp'
main debug: `http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD' gives access `http' demux `' path `192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD'
main debug: creating demux: access='http' demux='' location='192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD' file='\\192.168.0.2:8002\1:0:19:EE6:7EC:2:11A0000: 0:0:0::307 - Sky Action HD'
main debug: looking for access_demux module matching "http": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'http' location='192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD', path='\\192.168.0.2:8002\1:0:19:EE6:7EC:2:11A0000: 0:0:0::307 - Sky Action HD'
main debug: looking for access module matching "http": 20 candidates
access_http debug: querying proxy for http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD
access_http debug: no proxy
access_http debug: http: server='192.168.0.2' port=8002 file='/1:0:19:EE6:7EC:2:11A0000:0:0:0::307+-+Sky+Action+HD'
main debug: using meta fetcher module "lua"
main debug: removing module "lua"
main debug: searching art for stream.m3u
main debug: looking for art finder module matching "any": 2 candidates
main debug: net: connecting to 192.168.0.2 port 8002
lua debug: Trying Lua scripts in C:\Users\Dan\AppData\Roaming\vlc\lua\meta\art
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art
main debug: connection succeeded (socket = 1556)
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\00_musicbrainz.lua c
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\01_googleimage.lua c
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\02_frenchtv.luac
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\03_lastfm.luac
main debug: no art finder modules matched
main debug: art not found for stream.m3u
main debug: looking for meta fetcher module matching "any": 1 candidates
lua debug: Trying Lua scripts in C:\Users\Dan\AppData\Roaming\vlc\lua\meta\fetcher
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\fetcher
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\fetcher\tvrage.luac
main debug: using meta fetcher module "lua"
main debug: removing module "lua"
main debug: searching art for http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD
main debug: looking for art finder module matching "any": 2 candidates
lua debug: Trying Lua scripts in C:\Users\Dan\AppData\Roaming\vlc\lua\meta\art
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\00_musicbrainz.lua c
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\01_googleimage.lua c
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\02_frenchtv.luac
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\03_lastfm.luac
main debug: no art finder modules matched
main debug: art not found for http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD
qt4 debug: IM: Setting an input
qt4 debug: IM: Deleting the input
access_http error: failed to read answer
access_http debug: switching to HTTP version 1.0
main debug: net: connecting to 192.168.0.2 port 8002
qt4 debug: IM: Setting an input
qt4 debug: IM: Deleting the input
qt4 debug: IM: Setting an input
main debug: connection succeeded (socket = 1556)
access_http error: failed to read answer
main debug: net: connecting to 192.168.0.2 port 8002
main debug: connection succeeded (socket = 1556)
access_mms error: error: HTTP/1.0 400 Bad Request
main debug: no access modules matched
main error: open of `http://192.168.0.2:8002/1:0:19:EE6:7EC:2:11A0000:0:0:0::307 - Sky Action HD' failed
main debug: dead input
main debug: changing item without a request (current 1/2)
main debug: nothing to play
qt4 debug: IM: Deleting the input
I have an issue with transcoding on my solo2
Solo2 does the quick flash of screen and in VLC it shows as bold as connected. However no picture/audio comes through. Using build 3.0.802 and its a fresh install as I got it for Xmas
rubbabullets1
27-12-13, 10:59
Hi Everyone!
I have been following this thread as obviously we are all experiencing the same issue. I can get streaming to work to My Android / Ipad and PC no issue but as everyone else transcoding just won't work.
I appreciate everyones hard work to fix this and just wanted to says thanks and hopefully it will be cracked soon!
Rob van der Does
27-12-13, 11:17
Unfortunately there is nothing we can do: we are all awaiting a driver-fix from VU+.
The 24/12 drivers fixed transcoding for the DUO2, but not for the Solo2.
Unfortunately there is nothing we can do: we are all awaiting a driver-fix from VU+.
The 24/12 drivers fixed transcoding for the DUO2, but not for the Solo2.
Hi Rob I am using VIX 808 and I have updated to the 24/12 drivers on my Duo2, I can not get transcoding to work on my PC or Galaxy S4 using VLC using port 8002
Rob van der Does
27-12-13, 16:58
Hmm, that should work. I've seen reports confirming that.
Rob van der Does
27-12-13, 17:01
Maybe using the latest plugin will help: unzip the attached file to /usr/lib/enigma2/python/Plugins/SystemPlugins/TransCodingSetup and rstart GUI
Maybe using the latest plugin will help: unzip the attached file to /usr/lib/enigma2/python/Plugins/SystemPlugins/TransCodingSetup and rstart GUI
Thanks Rob will give this a try and report back
Still not working for me on my galaxy S4 I get a VLC playback error message of VLC encountered an error with this media. Please try refreshing the media library
I had it working, updated to latest vix build and now it is not working on phone or PC. The erro on VLC PC is "VLC is unable to open the MRL 'http://192.168.1.115:8002/1:0:1:283D:7FE:2:11A0000:0:0:0:'. Check the log for details."
What I have noticed is that on my solo2 it shows up REC on the display, which I presume is recording, even though I have no recording/timeshift on.
Maybe this has something to do with it? Sometimes VLC will show it in bold on playlist yet I get no picture after a few seconds
Rob van der Does
28-12-13, 18:19
The 'Rec' icon also shows on streaming.
Thanks. Gone to an older version but now webif is messed up in chrome but works fine in IE. Is there anyway to change the transcoding resolution on solo2?
Thanks. Gone to an older version but now webif is messed up in chrome but works fine in IE. Is there anyway to change the transcoding resolution on solo2?
Don't believe so, it can only be done on the duo2.
Rob van der Does
29-12-13, 06:12
Thanks. Gone to an older version but now webif is messed up in chrome but works fine in IE. Is there anyway to change the transcoding resolution on solo2?
On the Solo2 you can only change the bitrate and the framerate.
Thanks. Seems a little daft to have a low resolution. It's fine for a mobile device but for a tablet or laptop it's way too low
Rob van der Does
29-12-13, 08:12
At present there is a huge flaw in the Solo2 drivers. As a result of that the resolution of the transcoded stream is (or appears to be) very low.
We are awaiting a driver fix for this from VU+.
Hello everyone,
I'm new here on the forum and in the receiver world.
I allready passed some obstacles the past weeks, but for the moment I'm stuck on the same problem as you guys have here.
Everything was working fine, external streaming with transcoding thru port 8002. With webif port on 20443 on https, no problem!
Unfortunately at this time it doesn't work anymore.
The normal stream on port 8001 still works, but the transcoded one on port 8002 doesn't at all.
I get the same error logs in VLC: " error 502 bad gateway" also the blackbox app on ipad or other app's on android are broken.
Anyone has found a solution yet?
Thanks in advance!
Rob that VU transcoding issue is there for ever.
Any chance that someone can find what VU are doing through the distributor / sales channel.
Surely the distributer / importer has access to VU to find out when a solution is due...
VU still have the nerve to say on their website that the DUO2 supports transcoding when it really never did.
They might as well say it runs without electricity !!!
Surely WOS have access to someone that can give a formal update / response....
At present there is a huge flaw in the Solo2 drivers. As a result of that the resolution of the transcoded stream is (or appears to be) very low.
We are awaiting a driver fix for this from VU+.
I have also created a thread here (http://www.world-of-satellite.com/showthread.php?34898-Openvix-3-0-808-Transcoding-BUG) where the transcoding feature in the DUO2 in openvix 808 is also broken. Do you think it might be related to the same driver issue or is it something else?
Many thanks
Joh
giotecno1977
17-01-14, 14:22
Since installing newer images and drivers, I have been having non stop issues with transcoding streams etc. This was one feature which got me to purchase a solo2 and now I dont use it cus I CANT :mad:
Rob van der Does
17-01-14, 16:14
As has been stated several times: the latest you'll have to install them manually drivers do make transcoding work for the DUO2.
But you'll have to install them manually or await the next build.
As has been stated several times: the latest you'll have to install them manually drivers do make transcoding work for the DUO2.
But you'll have to install them manually or await the next build.
Installing the drivers manually didn't work for me on build 808 is there a way to check the driver has installed correctly Thanks
Rob van der Does
27-01-14, 09:54
Installing the drivers manually didn't work for me on build 808 is there a way to check the driver has installed correctly Thanks
No, but if you located them at the correct location, thereby overwriting the existing ones, and rebooted the box there's no way the box could hold other drivers then the ones you've installed.
BTW: In the meantime we've been working on transcoding and the Android VU-Player as well. Things look pretty good now, but you'll have to await a next release.
Anyone got a link to the new drivers for duo2 ?
And what folder they should be placed in ?
EDIT:
found it
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuduo2-3.3.8-4.4.3-20131230.tar.gz
path
/lib/modules/3.3.8-2.0/extra
bathingaper
31-01-14, 22:20
Anyone got a link to the new drivers for duo2 ?
And what folder they should be placed in ?
EDIT:
found it
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuduo2-3.3.8-4.4.3-20131230.tar.gz
path
/lib/modules/3.3.8-2.0/extra
what do these allow you to do ?
No, but if you located them at the correct location, thereby overwriting the existing ones, and rebooted the box there's no way the box could hold other drivers then the ones you've installed.
BTW: In the meantime we've been working on transcoding and the Android VU-Player as well. Things look pretty good now, but you'll have to await a next release.
I think I just restarted enigma would this stop the drivers being installed correctly over rebooting the box Thanks
Rob van der Does
01-02-14, 05:03
If you only restart E2 the new drivers will not be loaded. But they will on the next reboot.
So is there a 'last working' VIX build version for Solo2 one can use to get transcoding to work?
Hope the vu+ team will wake up and fix this mess soon enough, it's been quite some time already :(
So is there a 'last working' VIX build version for Solo2 one can use to get transcoding to work?
Hope the vu+ team will wake up and fix this mess soon enough, it's been quite some time already :(
yes but at this moment in time those builds have not been released to the public as we are still testing, a announcement will be made here and only on this forum or our twitter account when the new image is released.
yes but at this moment in time those builds have not been released to the public as we are still testing, a announcement will be made here and only on this forum or our twitter account when the new image is released.
Thanks for a quick reply. I was thinking more of a 'previous' version where it worked like 790, before it started going berserk, but if there is a test-version in rotation then I'll just wait as newer is always better.
This new image sounds interesting; hopefully it will sort it out.
@doonie: Transcoding works on builds before 760. You can get 750 and 753 from the archives if you want to reflash.
Rob van der Does
04-02-14, 05:43
Hope the vu+ team will wake up and fix this mess soon enough, it's been quite some time already :(
No worries: the ViX-team is wide awake and making overtime to produce 'a next build' :p
Hi Rob,
Is there no was to say there is a new firmware been worked on as a heading to this on the forum. stops people saying the same question
Rob van der Does
05-02-14, 06:10
Is there no was to say there is a new firmware been worked on as a heading to this on the forum. stops people saying the same question
LOL, we experienced that whatever we say on whatever location will never stop people asking the same question over and over again. Even important announcements about upgrades etc. are not being read .....
LOL, we experienced that whatever we say on whatever location will never stop people asking the same question over and over again. Even important announcements about upgrades etc. are not being read .....
Understand.
So what will be on the new version or we will just have to wait
Rob van der Does
06-02-14, 12:49
For the user: an update as usual: several enhancements and fixes.
Under the hood: a lot of (security) updates.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.