Help 600PVR image

[nelgo]

My dreambox DM 600 PVR was going crazy so I took a back up of all the files using telnet / ftp and ended up with a .img file on my Hard disk.

downloaded Universal DreamUP V1.3.3.11

downloaded an image file
dreambox-image-dm600pvr-20120108020416.nfi

Connected my DM600 using a null modem and Flashed the image
http://i42.tinypic.com/ilwvbs.jpg

When all was ready, I switched off, waited a minute, and switched on the DM600 but I got the Red and Green light on but no signal.

How can I restore my .img file cos the DreamUP software does not give me that option??
many tks
Nelgo

[wullboy]

I use dream-up 1.3.2.1 as i know it works with most boxes, also when useing dream-up you have to switch the dreambox of first,fire-up dream-up, then switch the dreambox on when asked by dream-up, make sure your firewall is off, as sometime this can stop the software from connecting to the box, and if port 1 does not connect, then switch to port 3 on dream-up. it can sometimes be a hit or a miss, but it will connect under the correct setting m8...

[nelgo]

tks m8,
there seems to be communication between the PC and the box. and I am following the procedure as you told me!!!