New VU Owner - Multi Dish help required

[onscam]

Hello everyone,

Would some kind soul give me a little help in configuring my tuner setups.

My plan is to set it up so I am able to record 2x 28.2e channels

I have 2x Dishes. One Fixed 28.2e Quad LNB. One Motorized for 1w/9e/13e/19e

My tuner A is ok and working - Tuner B has a 2/1 Diseqc Switch, Motor on 1, Fixed 28.2 on 2.

TUNER A
28.2e
Simple
Single
28.2
Diseqc = no

Can anyone advise the setup for TUNER B. I have my long lat settings ready etc.

Thanks

[basilyoung]

tuner B needs your USAL,s setting, the tuner can be set to simple or advanced

select say 28 east ,set lnb to 1 set your usals setting, press OK (saved) then go back into the tuner B config screen, select your required sat say 19 east, set to lnb 1 as well, the without pressing OK, change the sat to say 13 east, lnb 1, and repeat on any other sats you need, at the end, press OK (saved)
and thaqt should sort you

baz

ps, tuner A would normally be your default recording tuner on 28 east

[onscam]

Thanks for the quick reply Baz - really appreciate it :D

I'll give them settings a whirl

[basilyoung]

no problem onscam

hope you enjoy your unit, and the forum, also it might help us, if you add some info, regarding your sat kit to your signiture, dish sizes, motor type, etc

baz