PDA

View Full Version : No picture but sound


msuk
13-09-13, 21:42
Hi all,

For some channels like ITV HD I am getting a black screen and sound only.

Any ideas? Using Vix image

Thanks
Msuk
judge
13-09-13, 21:45
Not enough to go on really...
Image build? connection type? AV settings?
msuk
13-09-13, 21:54
Hi,

Latest image (only got the box today)
Single LNB connected to LNB2 on solo2
Selected 1080p output to my 50" Panasonic plasma VT65

Thanks in advanced.
Larry-G
13-09-13, 21:56
Which channel exactly and what channel list or bouquet are you using ?.

Sent from my GT-I9300 using Tapatalk 2
msuk
13-09-13, 22:02
Hi,

ITV HD and I selected auto bouquet
judge
13-09-13, 22:12
Hi,

Latest image (only got the box today)

Sorry, really don't mean to be pedantic but 'Latest image' really doesn't help, especially for any users with similar issues in future.
Please use the actual build number when reporting problems. Menu -> Information -> About.


Single LNB connected to LNB2 on solo2

I meant hdmi/scart...
But as you are using single cable? connected to tuner 2? have you set tuner A as loopthrough?


Selected 1080p output to my 50" Panasonic plasma VT65

That should be fine, but again, the more detail you provide the better.
AJT
13-09-13, 22:15
Hi sounds like you need to install bouquets and do a full channel scan.in the settings menu/set-up/service searching you will find "auto bouquet maker".open it and put in your area and your prefs etc and run it..this will install all your channel lists..when complete exit it and reboot enigma then also from service searching do a full auto scan for channels this will take a while to complete but after both are done you shold be good.

sorry judge did not see your post.
msuk
14-09-13, 11:34
Sorry, really don't mean to be pedantic but 'Latest image' really doesn't help, especially for any users with similar issues in future.
Please use the actual build number when reporting problems. Menu -> Information -> About.

Hi there, sorry for the lack of info in my previous post. The channels have started working now :)

I am using
Version 3
Build 733
Kernel 3.3.8
Drivers 2013-09-04

I meant hdmi/scart...
But as you are using single cable? connected to tuner 2? have you set tuner A as loopthrough?

I am using HDMI. How do I set tuner A as loop through?

That should be fine, but again, the more detail you provide the better.

Thanks for your help :)
duoduo
14-09-13, 13:46
On build 735 at present
msuk
15-09-13, 13:06
On build 735 at present

Where can I download that from?
Larry-G
15-09-13, 13:16
Where can I download that from?

you can download it directly via the Image manager using the download option or go to www.openvix.co.uk

Dont use the online update feature at the moment as it will update to build 378 which a bug, you can create a full settings backup using the backuop manager then flash build 735 and restore the backup to restore your plugins and settings.
Larry-G
15-09-13, 13:17
Making a settings backup is the same as a image backup but uses the backup manager instead.

How to make a image backup using ViX 3.0
Click Here (http://www.world-of-satellite.com/showthread.php?9752-How-to-use-Backup-amp-Image-Manager-on-Duo-Solo-Uno-ET9000-ET5000-ViX&p=220618&viewfull=1#post220618)

also look at this tutorial for flashing the image directly via the image manager.

How to restore flash a image in ViX 3.0 without a USB stick ( all receivers )
Click Here (http://www.world-of-satellite.com/showthread.php?28833-How-to-restore-flash-a-image-in-ViX-3-0-without-a-USB-stick-(-all-receivers-)&p=215907&viewfull=1#post215907)
msuk
15-09-13, 13:37
Found it and flashed the box :)

Thanks for your help! :)
msuk
15-09-13, 14:57
Flashed the 735 build and noticing lip sync i.e. actors lip not sync with the words. Is there a setting for this?
msuk
17-09-13, 19:47
Making a settings backup is the same as a image backup but uses the backup manager instead.

How to make a image backup using ViX 3.0
Click Here (http://www.world-of-satellite.com/showthread.php?9752-How-to-use-Backup-amp-Image-Manager-on-Duo-Solo-Uno-ET9000-ET5000-ViX&p=220618&viewfull=1#post220618)

also look at this tutorial for flashing the image directly via the image manager.

How to restore flash a image in ViX 3.0 without a USB stick ( all receivers )
Click Here (http://www.world-of-satellite.com/showthread.php?28833-How-to-restore-flash-a-image-in-ViX-3-0-without-a-USB-stick-(-all-receivers-)&p=215907&viewfull=1#post215907)

Hi,

So if I was to flash to a newer image, would restoring the image backup restore all my settings?
Larry-G
17-09-13, 19:49
Hi,

So if I was to flash to a newer image, would restoring the image backup restore all my settings?

A image backup is a full backup of the whole image. What you want is a regulat settings backup made in the backup manager. This backs up all your settings and plugins and can be restored to a new image flash when needed.

Sent from my GT-I9300 using Tapatalk 4
msuk
17-09-13, 20:20
A image backup is a full backup of the whole image. What you want is a regulat settings backup made in the backup manager. This backs up all your settings and plugins and can be restored to a new image flash when needed.

Sent from my GT-I9300 using Tapatalk 4

Hi,

Backed up the settings, flashed the 739 image, powered the box on an was asked to restore the setting the got a tune failed error :(

Any ideas?
Larry-G
17-09-13, 20:23
Hi,

Backed up the settings, flashed the 739 image, powered the box on an was asked to restore the setting the got a tune failed error :(

Any ideas?

Go into your tuner settings page and make sure it's set up correctly, then do a ABM scan to pull in a upto date sky uk channel list.
msuk
17-09-13, 20:31
Hi,

Backed up the settings, flashed the 739 image, powered the box on an was asked to restore the setting the got a tune failed error :(

Any ideas?

False alarm, the satellite cable was loose :(
Larry-G
17-09-13, 20:57
False alarm, the satellite cable was loose :(

Thanks for keeping us informed.