PDA

View Full Version : HDMI port not working


finko1672
08-09-13, 20:41
Hi ,I seem to have a problem with my HDMi port on my Technomate 2TOE .Its worked fine up until today and when i turned the box on this morning there was no picture.It seems to work fine on the scart/RF out puts.Could something be gone in thie HDMI output or is there something i can do the check it out?Ive changed the HDMI lead but still nothing.Would be greatful for any help.
has786
08-09-13, 21:21
Have you tried a different HDMI port on your TV or any other device to the same port on your TV?
finko1672
08-09-13, 21:25
Yeah the HDMI port on the TV is fine ,tried the PS3 /Apple TV in it and all worked fine.:confused:
has786
08-09-13, 21:33
Ok check under A/V settings if your video output is selected as HDMI, if not change it to HDMI. Have you checked the HDMI connection at the back of the receiver? If all looks ok you could consider reflashing.
TK4|2|1
08-09-13, 21:54
Have you tried powering it of and back on with the switch on the back?


Sent using sorcery and the magic interwebs
finko1672
08-09-13, 21:58
Yeah AV settings and HDMI connections are good,i never changed any of these and the box has ran fine for months,maybe reflashing would work.Thanks
Armpit1UK
08-10-13, 23:30
I must say that my box has recently been doing the same on occasion. Screen goes black on HDMI but is still there on scarf. Usually rights itself after a few minutes but is quite annoying to say the least!!
Larry-G
08-10-13, 23:35
any debug logs from these times ??.
Rob van der Does
09-10-13, 04:34
I must say that my box has recently been doing the same on occasion. Screen goes black on HDMI but is still there on scarf. Usually rights itself after a few minutes but is quite annoying to say the least!!
This can have multiple causes, a.o. a faulty cable or a loose connector. It would also be good to see if any other connected TV would experience the same.
Armpit1UK
09-10-13, 13:37
I will check to see if I can find a debug log if/when it happens again. It's a bit difficult to try with a different TV but will see what I can do.
Armpit1UK
16-10-13, 20:58
Thought I'd update you on the above. I ended up re-flashing the box to 750 and so far (fingers crossed) no repeat problem.