View Full Version : tv out
HI ALL, IS THERE ANYWAY OF GETTIN PICTUE OUT FROM THE BOX VIA AN ARIEL, WHAT IM AFTER IS MY OLD SKY SYSTEM I HAD TV OUT TO THE BEDROOM VIA THE ARIEL, IS THERE ANY WAY OF DOIN THIS AGAIN WITH THE SOLO2 BOX, THANKS SCOTT :thumbsup:
Rob van der Does
17-08-13, 06:02
Please check your Caps-Lock key.
Hi,
you need an external modulator like "Audiovox Corporation CRF907R Compact RF Modulator" because nothing like that is build in.
ciao
Yes use the HDMI lead for downstairs and the scart lead to a RF modulator to the arial. Tune your TV upstairs to receive :wave:
Thanks, am I able to change the channel in the bedroom using this system,
hi,
not directly. usw a smart phone to do that.
ciao
Gesendet von meinem GT-P1000 mit Tapatalk 4
http://pages.ebay.com/link/?nav=item.view&id=32113576408http://pages.ebay.com/link/?nav=item.view&id=321135764083
Thanks is this what I need
or is it one of these, Mercury ILS102 RF Video Modulator
Hi,
Mercury should work.
ciao
I have this http://www.ebay.co.uk/itm/GLOBAL-INVACOM-TV-LINK-PLUS-ADAPTER-PSU-/221055758595?pt=UK_AudioTVElectronics_Video_Remote Controls&hash=item3377f33103
And this http://www.ebay.co.uk/itm/RF-Modulator-SCART-Connection-CCTV-DVD-and-Games-Consoles-69-Output-/110974852428?pt=UK_Sound_Vision_Other&hash=item19d69ddd4c
Feeding a "magic eye" amp, i have 6 existing sky magic eyes via the amp, works perfectly for my VuDuo+
Hi I've bought the mercury modulator. Think I must be doin something wrong cos I don't seem to be able to get a picture out. At the moment I have a scart out of my solo box to the mercury from there I have an ariel out to the other tv but no luck, could someone give me a step by step guide, thanks Scott
Rob van der Does
19-09-13, 21:38
On the Solo2 you must set the scart to CVBS.
No worries: this does nothing to your HDMI-settings; that output will remain fine as well.
And make sure you've set downmix to yes if you want sound on the second telly.
Still no joy on the second tv, this is what I've set up is this correct, thanks scott28909
Rob van der Does
20-09-13, 20:19
Yeah, but maybe choose something else then 'multi'?
Still not workin, tried all the different settings on the box, not sure if I'm doin something wrong at the tv end. I'm trying to tune it to analogue channel on a Sony Bravia LCD. Any more pointers would be appreciated. Thanks Scott
Rob van der Does
24-09-13, 22:24
Well, nothing wrong as far as I can see.
try it step by step.
do you have signal on your scart cable? plug it into a tvset to check.
do you have signal on the scart out of your Mercury? 2e scart to tvset.
Has the tv plugged into the Mercury TV/vcr out some kind of signal on the channel the Mercury is 'broadcasting'? With on scart plugged-in it should be black image instead of 'snow'.
Finally workin, thanks for replays peeps, now just need to sort out a remote eye, which is best to go for. Thanks Scott
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.