Anyone using usb DVBt tuners successfully with DUO 2?

[irishchris]

Just wondering if anybody with three internal tuners has tried a usb dvbt tuner? I have tried unsuccessfully to enable Sundtek dvbt tuner with the duo 2. Three Sat tuners work perfectly but once dvbt usb tuner is enabled it stops any tuner in the second slot from working - in my case tuner b&c. Have informed Sundtek and they are looking at it but think it may be a problem with the duo 2 as opposed their drivers.
If anyone has this setup can they list which usb tuner they have and if it is working on duo2. Cheers

[andyblac]

as i have said before my duo2 has 4 internal tuners, and no usb tuner works with 4 internal tuners, so sorry i can't test this.

[irishchris]

No I understand that Andy cheers. I have posted this in the public section so can get reports of everyone on their experience

[iem]

I have 4 tuners and a PCTV 290e USB DVB-T2 tuner plugged in. It sees it as tuner E but doesn't seem to find any UK channels when performing a search.

[Rob van der Does]

atm all VU boxes can handle a maximum of 4 tuners.
VU+ has promissed us to release updated drivers for this shortly.

[iem]

To let you all know I can confirm Build 722 sees the DVB-T2 tuner and all is good - well done!!!

28187

28188

[Larry-G]

This is because of a recent driver update to allow more than 4 tuners to run in the Ultimo and Duo2, so thanks to Vu+.

[Nitemare]

Brilliant ... now to source a T2 USB tuner ... :D

[Rob van der Does]

Brilliant ... now to source a T2 USB tuner ... :D
A T2-USB twin-tuner you mean?

[Nitemare]

A T2-USB twin-tuner you mean?

Indeed ... :thumbsup:

[s31teg]

@rob whats the max number of tuners an Ultimo can handle?

[Rob van der Does]

I don't know.

[Heathy65]

To let you all know I can confirm Build 722 sees the DVB-T2 tuner and all is good - well done!!!

Hi,
I'm considering the purchase of a Vu+ Duo2 with 2 x dual DVB-S2 and a USB DVB-T (or even a pair).

The DVB-T option is a critical requirement for me so I'd appreciate some feedback on any issues (if any) with USB DVB-T tuners.

Thanks in advance.

[stick50jr]

@rob whats the max number of tuners an Ultimo can handle?

Recently the firmware was upgraded to support 4 x vtuners (virtual tuners eg usb tuners). I have a Duo2 with three internal tuners and with this change, I added 4 x usb tuners, giving a total of seven tuners. However, I discovered that i could only use four simultaneously. I complained to Vu+ that they needed to have more demuxs to allow simultaneous use of all the possible tuners.


VU 6/11-drivers
update driver
20131106
- Fix HDMI hotplug in standby(proc entry is also added)
- Support DVB-T2 automatic scan(uno, ultimo, duo2)
- Improve transcoding(duo2, solo2)
- Add dst_apply proc entry
- Increase demux number to 9(duo2, solo2, ultimo)
- Support blindscan in all slots(ulitmo, duo2)







I'm very excited to say that they responded quite quickly and now with 9 demux, those model should support a total of eight tuners with simultaneous playback from file (nineth demux).:)

Vix 3.0 Build 777 will have this new firmware.

[Heathy65]

Recently the firmware was upgraded to support 4 x vtuners (virtual tuners eg usb tuners). I have a Duo2 with three internal tuners and with this change, I added 4 x usb tuners, giving a total of seven tuners. However, I discovered that i could only use four simultaneously. I complained to Vu+ that they needed to have more demuxs to allow allow simultaneous use of all the possible tuners.

I'm very excited to say that they responded quite quickly and now with 9 demux, those model should suppport a total of eight tuners with simultaneous playback from file (nineth demux).:)

Excellent, thanks for the info. BTW what DVB-T/T2 USB tuners are you using?

[stick50jr]

Excellent, thanks for the info. BTW what DVB-T/T2 USB tuners are you using?

As per my signature block ( see at the bottom of my post)! Whoops, just noticed that my signature block omitted that I have one internal dvb-c/t (in addition to the six mentioned).
30152

[Heathy65]

As per my signature block ( see at the bottom of my post)!

Doh, thanks :eek:

[s31teg]

Thanks for the update. Great news!