Card reader problems [Archive] - Satellite Support Forum .: Home of OpenViX Team:.

ace_pt

29-07-13, 22:49

This box is having problems with card reader after a will it stops working...
I have tested several versions of oscam and configs and several Images like Egami 3.0 last and openATV also the last.
And different drivers dvb.ko .
Big deception for this box that claims to be compatible with VU images and DM.
The rest is all ok

ace_pt

30-07-13, 20:45

I have now the card reader´s working with the openatv-3.0-ventonhdx-20130707_usb the only one that is stable with the card readers but unsable with the tuner.
after a while it says not found on mostly Hd cannels (driver problem).
I hope venton solve this issuers with the driver´s sown.

Sicilian

30-07-13, 21:23

after a while it says not found on mostly Hd cannels (driver problem).
I hope venton solve this issuers with the driver´s sown.

There is no driver problem with the Venton, if you have a Tuner issue I suggest you contact where you purchased, most likely a faulty tuner module. Regards the card reader, again, no driver issues. Check your configs and contact where you purchased.

Venton are very good with fixing driver issues and there no such issues as you have reported.

ace_pt

30-07-13, 21:53

Ok a see that you are a seals man, or you are joking with my intelligence before you post please read the links that im going to give you sow you dont waste my time.
http://www.world-of-satellite.com/showthread.php?21868-Drivers-for-Venton-Unibox-HD1-HD2-HD3&p=224506
A link for the drivers
http://code-ini.com/index.php?open=software/drivers
If no problem why to many drivers OE Egami team says "that the drivers need improvement"

Thanks

Sicilian

31-07-13, 04:55

Theres no driver issues with the Tuners in the HDx, if there was I'd be the 1st to report it as I have private access to there bug tracker. Check your feeds/LNB, or you may have a faulty tuner module.

If you have an issue with your card reader it may be card specific, I suggest you post your exact card and logs.

The links you post just show they have released regular driver updates, what exactly is wrong with that?

ace_pt

31-07-13, 09:08

Hi again Egami image from 25/06/2013 i have card reader problems the same with opentv from 30/07/2013 tested several oscam config´s and oscam versions the same goes for SBOX0.0.5.2 to 0.0.5.4
With OpenATV 05/07/2013 and OpenVix image no card reader problems tested with several configs oscam versions.... SBOX not tested
Explain that ?

Sicilian

31-07-13, 09:54

Hi again Egami image from 25/06/2013 i have card reader problems the same with opentv from 30/07/2013 tested several oscam config´s and oscam versions the same goes for SBOX0.0.5.2 to 0.0.5.4
With OpenATV 05/07/2013 and OpenVix image no card reader problems tested with several configs oscam versions.... SBOX not tested
Explain that ?

How can we possibly explain anything! You've provide no card information.

ace_pt

31-07-13, 13:07

Ok afther a 4h off working with the last 709 VIX image

im geting this on oscam

2013/07/31 12:50:31 51DDE8 c (1802&004801/0000/025E/92:640AF4F6900AFFEF464968E6C8616D52): not found (50 ms)
2013/07/31 12:50:32 51DDE8 c (1802&000000/0000/0384/92:936A72C6FB8867CDA71DD12336BC6A53): not found (50 ms)
2013/07/31 12:50:35 51DDE8 c (1802&000000/0000/0321/92:63E0C6C3DDF32C075D5467FEF98D141A): not found (50 ms)
2013/07/31 12:50:37 51DDE8 c (1802&000000/0000/0384/92:942EE8656EC5FC05B0F7C98B66882B18): not found (51 ms)
2013/07/31 12:50:37 51DDE8 c (1802&000000/0000/0384/92:F770A2D1CA9AA73A86B5DEE4E4CB910E): not found (51 ms)
2013/07/31 12:50:37 51DDE8 c (1802&000000/0000/0384/92:6F3F5BA9227979B500B5CB48227AF10A): not found (49 ms)
2013/07/31 12:50:40 51DDE8 c (1802&000000/0000/032D/92:0F758151646DFCC8169246C6D821B8A8): not found (50 ms)
2013/07/31 12:50:42 51DDE8 c (1802&000000/0000/0384/92:D9199E68AEC34731826EC935D568A6E9): not found (49 ms)
2013/07/31 12:50:42 51DDE8 c (1802&000000/0000/0384/92:E7507DCE950EBE5919DC8816F267FF6B): not found (51 ms)
2013/07/31 12:50:44 51DDE8 c (1802&000000/0000/0384/92:245E68686169AC997FBD884AE97C033C): not found (49 ms)
2013/07/31 12:50:47 51DDE8 c (1802&000000/0000/0384/92:CFC16E6DFD4684D85778499B295A7F65): not found (49 ms)
2013/07/31 12:50:50 51DDE8 c (1802&000000/0000/0321/92:A33CA166918370306158E281B9BB5F9F): not found (49 ms)
2013/07/31 12:50:50 51DDE8 c (1802&000000/0000/0384/92:E7507DCE950EBE5919DC8816F267FF6B): not found (0 ms)
2013/07/31 12:50:52 51DDE8 c (1802&000000/0000/0384/92:D281DB6BD35CE932FC3BEBDDDAECB194): not found (49 ms)

And if i restart oscam

2013/07/31 12:54:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8639 (mipsel-unknown-linux-gnu)
2013/07/31 12:54:52 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8904
2013/07/31 12:54:52 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/07/31 12:54:52 0 s signal handling initialized
2013/07/31 12:54:52 0 s 445 service-id's loaded in 7ms
2013/07/31 12:54:52 0 s newcamd: initialized (fd=4, port=17100)
2013/07/31 12:54:52 0 s -> CAID: 1802 PROVID: 000000, 004801, 004901
2013/07/31 12:54:52 0 s newcamd: initialized (fd=5, port=17200)
2013/07/31 12:54:52 0 s -> CAID: 0100 PROVID: 005211, 005221, 005225
2013/07/31 12:54:52 0 s Cabo [internal] creating thread for device /dev/sci0
2013/07/31 12:54:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/07/31 12:54:52 0 s waiting for local card init
2013/07/31 12:54:52 519548 r [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=368)
2013/07/31 12:54:52 5063E8 h webif: decompressed 52609 bytes back into 152072 bytes
2013/07/31 12:54:52 5063E8 h HTTP Server listening on port 19600
2013/07/31 12:55:50 519548 r [internal] ATR: 78 F8 08 00 F8 08 08 C8 F0 98 00 80 B0 88 50
2013/07/31 12:55:50 519548 r [internal] ERROR: Could not read reader->convention
2013/07/31 12:55:50 519548 r [internal] Error activating card.
2013/07/31 12:55:51 519548 r [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 34 10
2013/07/31 12:55:51 519548 r [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/07/31 12:55:51 519548 r [internal] Calculated work ETU is 5.33 us
2013/07/31 12:55:53 519548 r [internal] ATR Fsmax is: 5 Mhz, clocking card to 6.00
2013/07/31 12:55:53 519548 r [internal] Card responded ok for ifsd request of 251
2013/07/31 12:55:54 519548 r [internal] detect native nagra card
2013/07/31 12:55:55 519548 r [internal] found card system nagra
2013/07/31 12:55:55 519548 r [nagra] ROM: D N A S P 1 4 2
2013/07/31 12:55:55 519548 r [nagra] REV: R e v G 0 4
2013/07/31 12:55:55 519548 r [nagra] SER: ############
2013/07/31 12:55:55 519548 r [nagra] CAID: 1802
2013/07/31 12:55:55 519548 r [nagra] Prv.ID: 00 00 48 01 (sysid)
2013/07/31 12:55:55 519548 r [nagra] Prv.ID: 00 00 00 00
2013/07/31 12:55:55 519548 r [nagra] IRD ID: ############
2013/07/31 12:55:55 519548 r [nagra] active to: 2013/08/28 12:59
2013/07/31 12:55:55 519548 r [nagra] -----------------------------------------
2013/07/31 12:55:55 519548 r [nagra] |id |tier |valid from |valid to |
2013/07/31 12:55:55 519548 r [nagra] +----+--------+------------+------------+
2013/07/31 12:55:55 519548 r [nagra] |4901|6B7E |2012/03/06 |2012/07/24 |
2013/07/31 12:55:55 519548 r [nagra] |4901|01E2 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|0270 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|0338 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|270C |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|2B2C |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|524E |2012/02/07 |2012/05/15 |
2013/07/31 12:55:55 519548 r [nagra] |4901|3391 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|3392 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|3393 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|3394 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|3395 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|3770 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|4AB7 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|5976 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|7061 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|7062 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|7063 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] |4901|7065 |2003/01/01 |2003/01/01 |
2013/07/31 12:55:55 519548 r [nagra] -----------------------------------------
2013/07/31 12:55:56 519548 r [nagra] ready for requests
2013/07/31 12:55:56 0 s init for all local cards done
2013/07/31 12:55:56 0 s anti cascading disabled
2013/07/31 12:55:56 51E170 c client connected to XXXXX port
2013/07/31 12:55:56 51E170 c anonymous disconnected from XXX.XXX.XXX.XXX
2013/07/31 12:55:59 51FCE8 c client connected to XXXXX port
2013/07/31 12:55:59 51FCE8 c encrypted newcamd:17100-client XXX.XXX.XXX.XXX granted (ace_pt, au=auto (1 reader))
2013/07/31 12:55:59 51FCE8 c user authenticated successfully (CCcam)
2013/07/31 12:55:59 51FCE8 c AU enabled for user XXXXX on reader Cabo
2013/07/31 12:56:00 51FCE8 c (1802&000000/0000/0139/92:86C385FFD254658310FE3E7160E426F0): found (386 ms)
2013/07/31 12:56:00 51FCE8 c (1802&000000/0000/032B/92:EFC310818CD23875D294E4219CE9814A): not found (219 ms)
2013/07/31 12:56:02 51FCE8 c (1802&000000/0000/0384/92:219ED32B8AAFEB503C2788F57613C6EE): found (279 ms)
2013/07/31 12:56:03 51FCE8 c (1802&000000/0000/0BEA/92:238B5034F77DBAFADD358C5E9AE13C8D): not found (219 ms)
2013/07/31 12:56:03 51FCE8 c (1802&000000/0000/02CE/92:B6409CF298C415B62080CE9C968C91C6): found (380 ms)
2013/07/31 12:56:04 51FCE8 c (1802&000000/0000/02CE/92:BCD5A59303F60E76ECB5122EECD4ED7F): found (379 ms)
2013/07/31 12:56:06 51FCE8 c (1802&000000/0000/0321/92:97A29B27252FA3A012BD726E3D187C85): found (379 ms)
2013/07/31 12:56:07 51FCE8 c (1802&000000/0000/0384/92:1BBC857E28447C994725A573B52CA2F2): found (279 ms)
2013/07/31 12:56:08 51FCE8 c (1802&000000/0000/0067/92:AF6DD9AD62C0EA6180B31A74BCF1D926): not found (385 ms)
2013/07/31 12:56:09 51FCE8 c (1802&000000/0000/032C/92:0AAF5A5D720A8FE75ECEEE5E6F2DBEA4): found (385 ms) by
2013/07/31 12:56:10 51FCE8 c (1802&000000/0000/032D/92:9D8EB356A09E7A6A6FE005597A0B4591): found (389 ms) by
2013/07/31 12:56:12 51FCE8 c (1802&000000/0000/0384/92:A30D55B4B64B7EEA08EE649AF17CE733): found (279 ms) by
2013/07/31 12:56:13 51FCE8 c (1802&000000/0000/032E/92:009473F626D9C16D66CA22964CCACB0B): found (388 ms) by
2013/07/31 12:56:13 51FCE8 c (1802&000000/0000/0BEA/92:593DC65F5744D3F63FFEBA982DF92DE3): not found (218 ms) by
2013/07/31 12:56:15 51FCE8 c (1802&000000/0000/0139/92:AF1331DF87072763DD0C4DBDBA022EF7): found (381 ms) by
2013/07/31 12:56:15 51FCE8 c (1802&000000/0000/0BD6/92:733011677EBAEC4D615C83A9E41F9D9D): not found (218 ms) by
2013/07/31 12:56:16 51FCE8 c (1802&000000/0000/032B/92:EFC310818CD23875D294E4219CE9814A): not found (218 ms) by

I have tested several configs, clock´s, upper and lower reader and bilds of oscam always the same problem

Sicilian

31-07-13, 13:10

Are you 100% sure your configs are ok? Can you check with a Smargo connected to USB port?

Sicilian

31-07-13, 13:16

Found these configs, haven't got a card to test here, but I can submit logs for you.

http://www.satnigmo.com/45/tv-cabo-n3-oscam-config/

chaser

31-07-13, 13:55

This sounds very much like an OSCAM config issue. If the link that Sicilian provided doesn't help, you may want to join and ask for help over at the official OSCAM forums:

http://www.streamboard.tv/wbb2/portal.php

They'll want to see your exact configs and a full debug log.

I would also recommend trying the latest v8789 (at time of posting) version of OSCAM. Precompiled binaries can be downloaded from this site:

http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK/mips-tuxbox-oe2.0

Sicilian

31-07-13, 16:12

I've had submitted to Venton private bug tracker too, to check this out.

ace_pt

01-08-13, 00:39

Hi again i have tested with last oscam version and same result.
im going to post the last configs used

oscam.conf

[global]
logfile = stdout
emmlogdir = /usr/keys/
loghistorysize = 9999
clienttimeout = 9000
cachedelay = 100
nice = -1
maxlogsize = 200
waitforcards = 0
saveinithistory = 1
lb_save = 100
lb_min_ecmcount = 4
lb_savepath = /usr/keys/oscam.stat

[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
hideclient_to = 15
appendchaninfo = 1

[dvbapi]
enabled = 0
au = 1
boxtype = dreambox
user = dvbapi

[webif]
httpport = XXXXX
httpuser = user
httppwd = pwd
httprefresh = 5
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
#debug = 255

[newcamd]
key = 0102030405060708091011121314
port = XXXXX@1802:000000,004801,004901;XXXXX@0100:05211,0 5221,05225
keepalive = 1
mgclient = 0

oscam.server

[reader]
label = meo
enable = 0
protocol = internal
device = /dev/sci1
detect = cd
cardmhz = 368
mhz = 600
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
group = 2
emmcache = 1,1,2
lb_weight = 500
caid = 0100
ident = 0100:05211,05221,05225

[reader]
label = cabo
enable = 1
protocol = internal
device = /dev/sci0
boxkey =
rsakey =
detect = cd
cardmhz = 368
mhz = 368
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
group = 1
emmcache = 1,1,2
lb_weight = 500
caid = 1802
ident = 1802:000000,004801,004901

oscam.user

[account]
user = user
pwd = pwd
uniq = 0
group = 1
au = 1
keepalive = 1
caid = 1802
ident = 1802:000000,004801,004901

Thats my last config

Ps: this same config works with gigablue Quad, 800SE/UE DM 8000 and DM 800SE with all last versions of oscam since 85xx

Regards