View Full Version : Using a LNB splitter on the Solo2 ?
silent_hill_dan
19-07-13, 10:52
Hello,
I would like to know if I can use a simple LNB Splitter to send the same satellite feed to the Vu+ Solo2 LNB inputs ?
So there will be 1 cable coming from my dish, into a splitter, to the 2 LNB inputs of the Solo2. Would that work just fine ?
Thanks a lot,
Daniel.
no it would not work, and worse still you could potentially cause damage to both the receiver and LNB if you did use such a splitter.
you need two separate and independent feeds, if thats not possible connect the feed to tuner B and set tuner A as loopthrough to tuner B, this will give you more options but it's no where as good as having proper feeds going to each tuner.
silent_hill_dan
19-07-13, 11:36
Thanks a lot phoenix.
I have also just discovered about this internal loop-through feature.
That's exactly what I wanted as I want to replace my ET9500 (with 2 independent tuners and an external loop-through cable) for a Solo2 :-)
Or a unicable/scr LNB, but they ain't cheap.
Sent using sorcery and the magic interwebs
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.