et9200 usb not working

[scottnewlove]

Hi, i am wanting to flash my et9200 but none of the usb ports are working. i know this as my usb stick as a red light when it plugs into any usb port, ive also tried charging my phone but still nothing, any idea how to flash the box via the rs232 port or even fix the usb ports thank you

[Stanman]

Do you have anything else on the USB. What is the file name on the USB, if ET9X00 did you update the bootloader since using images titled ET9000

[scottnewlove]

Hi yes the file is correct the usb ports are just not working, i no this because ive flashed before and it was easy but now the usb ports wont even charge my phone or even make the light come on the usb stick, can i flash via ftp thank you

[Larry-G]

no but if your on one of the latest ViX images you can flash directly from the image manager.

[scottnewlove]

thank you, think my et9200 is low on internal memory alot of crashes

[scottnewlove]

hi i flashed via the downloading method but my box is now stuck on the openvix splash screen any ideas i cannot get into my box now via ftp. thank you

[bks]

Hello,
I don't want to open new thread, that's why I post here.
I have the same issue. All my USB ports doesn't work.
I have Xtrend 9200. I use Openpli 4.0
Can you advice me how to reflash my receiver not using USB?

Can I fix the problem without re-flashing? If yes - please advice how.

[twol]

For USB, make sure you only use front usb and have removed any other usb attachments.

[Flyingpig]

It is really important that you follow the guides on the site.

Some of the common mistakes made when booting from usb are not having the usb drive as bootable. Having another USB stick in the back. HAving the USB Stick formatted to the correct format.

[egz]

was this issue resolved? i have the same problem, and have read in an italian forum that the transistor Q34 needs to be replaced....

[newlove2003]

Hi yes i took my box to the local guy who does soildering and he fixed it for a 5er was some transistor ill let u know which one tomoz

[egz]

solved the usb problem. it was the transistor Q34. my soldering job isnt the best, but it did the job! :D
btw this is the transistor you need according to the forum i read up on...MOSFET N-CH 20V 3.2A SOT23 which i ordered but was taking too long, so i found this one on eBay MOSFET N-CH 20V 3.3A SOT23 and it came within 5 days. it works fine, but we'll have to see in the long run i guess.

348363483734838

[newlove2003]

yes that is what i did soory for no reply i totally forgot

[egz]

In the long run...the usb port stopped working again. not sure if it was because of my soldering job or if the transistor fried up again. luckily i managed to flash it so at least the box is working.