Can't access my recordings

[maguinness1978]

im pretty new to this but ive had the box for a couple of months but when i press list none of my recordings appear all i get is words down the lft had screen ie crosspeg.my recordings are still there as ive used up about 16%.my box is a tm-2t:confused::confused:

thanks

[judge]

What Image & build are you using?
Also, can you take a screenshot of the screen so we can see what's happening?
How to take a screenshot (http://www.world-of-satellite.com/showthread.php?12554-Tutorial-How-to-make-a-screenshot-dump-from-your-satellite-receiver&p=90834&viewfull=1#post90834)

[maguinness1978]

im really clueless at this ive no idea after looking at the directions of screen shot how to do it and do idea what u mean by image&build.i paid a guy to install this for me.

[judge]

Menu -> Information -> About should tell you the image & build number.

[maguinness1978]

image is openpli 2.1.hardware 2t.milcom verson 108.

thanks for ur patience

[Larry-G]

To find out the build number

Menu> Information> About.

another easy way to make a screenshot directly from your browser. In the search bar of your browser paste this and press enter

http://192.168.1.5/grab?format=jpg&r=1920 change 192.168.1.5 to the ip address of your receiver, to find this press Menu> Information> network.

[Larry-G]

image is openpli 2.1.hardware 2t.milcom verson 108.

thanks for ur patience

so your not on the ViX image then, but you can still try to take a screen shot.

[maguinness1978]

sorry im not able to work out how to take a screen shot.is there anyway of resetting the box without losing any recordings or channels?

[Stanman]

Recordings will be saved irrespective of any flashing etc you do as long as you do not re initialise the HDD. CHannels no but easy enough to get back up

[maguinness1978]

thanks for your help but might have to give the guy a buzz who installed for me

[Stanman]

It really is easy to set up a box, have a read of the forum and info is all there, if you need help just post up your questions.

[judge]

thanks for your help but might have to give the guy a buzz who installed for me

You'ld be a lot better off learing to do this yourself.
These boxes require updating from time to time & you could save yourself some ££ by trying it yourself.
Once you've done it a few times, it really is easy.
Search for the tutorials Pheonix has been adding to the forums & try it out.
Then, just ask anywhere if you get stuck.

[Larry-G]

How to flash a TM-2T-OE
Click Here (http://www.world-of-satellite.com/showthread.php?23846-How-to-USB-flash-upgrade-Technomate-TM-2T&p=177528&viewfull=1#post177528)

[scottmcroberts]

Post deleted by me,